ESC-075SXXXDT INVENTRONICS
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Features
Description
The ESC-075SxxxDT(ST) series is a 75W, constant-current LED driver that operates from 249-528 Vac input with excellent power factor. It is created for low bay, area and street lights. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature. Models Output Current (1) Input Voltage Range Output Voltage Range Max. Output Power Efficiency (2) Power Factor Model Number 277Vac 480Vac 350 mA 249 ~ 528 Vac 107~214Vdc 75 W 87.0% 0.95 0.90 ESC-075S035DT(ST) 700 mA 249 ~ 528 Vac 53~107 Vdc 75 W 86.0% 0.95 0.90 ESC-075S070DT(ST) 1050 mA 249 ~ 528 Vac 36 ~ 72 Vdc 75 W 87.0% 0.95 0.90 ESC-075S105DT(ST) 1400 mA 249 ~ 528 Vac 26 ~ 53 Vdc 75 W 87.0% 0.95 0.90 ESC-075S140DT(ST) (3) 2100 mA 249 ~ 528 Vac 18 ~ 36 Vdc 75 W 86.0% 0.95 0.90 ESC-075S210DT(ST) (3) 3150 mA 249 ~ 528 Vac 12 ~ 24 Vdc 75 W 85.0% 0.95 0.90 ESC-075S315DT(ST) (3)(4)(5) Notes: (1) The output current is adjustable at factory from 50% to 100%. (2) Measured at 25ć, full load and 480 Vac input. (3) UL Class 2 Output (USR) for dry and damp location. (4) CUL Class 2 Output (CNR) for dry and damp location. (5) CUL Class 2 Output (CNR) for wet location Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 249 V - 528 V Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.7 mA At 480Vac 60Hz input /g121 High Efficiency (Up to 87%) /g121 Active Power Factor Correction (0.95 Typical) /g121 Constant Current Output /g121 0-10V Dimming Control /g121 Input Surge Protection: 4kV line-line, 6kV line-earth /g121 All-Around Protection: SCP, OTP, OVP and Open Lamp /g121 Waterproof (IP67) and UL Dry / Damp / Wet Location /g121 Class 2 & SELV Output /g121 TYPE HL, for use in a Class I, Division 2 hazardous (Classified) location DISCOUNTINUED ED driver that operaED driver that oper nd street lights. Thend street lights. T ficantly improving reficantly improving re d against input surgagainst input surg UNUN ax. UN ut UNUNUN Effi UN UNUNUNUUN Vdc 75 W Vdc 75 W UOUU
07 Vdc 75 W 07 Vdc 75 W
36 ~ 72 Vdc 75 W72 Vdc 75 OO ac 26 ~ 53 Vdc c 26 ~ 53 Vdc COCO8 Vac 18 ~ 36 Vdc c 18 ~ 36 V COSC O ~ 528 Vac 12 ~ 24 V~ 528 Vac 12 ~ 24 V SCSCSCSC ) The output current) The output curr (2) Measured at) Measured at 2525 (3) UL Class 2 O(3) UL Class 2 O (4) CUL Class4) CUL Cla (5) CUL ClCU SpecifSpecifDD
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 75W Constant Current IP67 Driver/g3ESC-075SxxxDT(ST) Rev. K Input Specifications (Continued) Parameter Min. Typ. Max. Notes Input AC Current - - 0.34 A Measured at full load and 277 Vac input. - - 0.21 A Measured at full load and 480 Vac input. Inrush current - - 135 A At 480Vac input 25ć Cold start, Duration= 1.2mS, 10%Ipk-10%Ipk Power Factor 0.90 - - At 277Vac-480Vac, 100% load Output Specifications Parameter Min. Typ. Max. Notes Output Current Tolerance -5% - 5% No-load Output Voltage 104% Vomax 112% Vomax 120% Vomax 1400mA: 59.9V (max) Output Current Ripple - 20%Io 30%Io Measured at full load, 25ć ambient temperature, Line Regulation - - f1% Load Regulation - - f3% Turn-on Delay Time - 1.0 s 3.0 s Measured at full load, 277Vac input. - 1 .0 s 3.0 s Measured at full load, 480Vac input. Note: All specifications are typical at 25 /g113C unless otherwise stated. Protection Functions Parameter Min. Typ. Max. Notes Over Temperature Protection---Tc - 110 /g113C - Auto recovery mode. The power supply shall return to normal operation after the fault condition is removed. Short Circuit Protection Hiccup and no damage shall occur when any output operating in a short circuit condition. General Specifications Parameter Min. Typ. Max. Notes Efficiency IO = 350 mA IO = 700 mA IO = 1050 mA IO = 1400 mA IO = 2100 mA IO = 3150 mA 87 % 86 % 87 % 87 % 86 % 85 % 88 % 87 % 88 % 88 % 87 % 86 % Measured at full load, 277Vac input, 25ć ambient temperature, after the unit is thermally stabilized. It will be 1% lower, if measured immediately after startup. Efficiency IO = 350 mA IO = 700 mA IO = 1050 mA IO = 1400 mA IO = 2100 mA IO = 3150 mA 86 % 85 % 86 % 86 % 85 % 84 % 87 % 86 % 87 % 87 % 86 % 85 % Measured at full load, 480Vac input, 25 ć ambient temperature, after the unit is thermally stabilized. It will be 1% lower, if measured immediately after startup. DI ficiency ficien IOO = 35= IIOO = = IIO DISCOUNTINUED DuratiDurati D % load % load DEDUEUE Notes UEUE 400mA: 59.9V (max) 59.9V (max) NU Measured at full loaMeasured at full l temperature, tempera NUTI TINTI ff3%3% TITI 3.0 s Me3.0 s M NTNT0 s 3.0 s 0 s 3.0 s NTUNUNUN T C unless otherwiseunless othe OO in. OUOU Typ. UOUOU - 111 OCO on Hiccup and Hiccup an COSCSCSC Specifications Specifications DISDIS Parameter SISSDI
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 75W Constant Current IP67 Driver/g3ESC-075SxxxDT(ST) Rev. K General Specifications (Continued) Parameter Min. Typ. Max. Notes MTBF - 250,000 Hours - Measured at 480Vac input, 80%Load and 25/g113C ambient temperature (MIL-HDBK-217F) Lifetime - 112,000 Hours - Measured at 480Vac input, 80%load; Case temperature=60ć @ Tc point. See life time vs. Tc curve for the details Operating Case Temperature for Safety Tc_s -40°C - +90/g113C Operating Case Temperature for Warranty Tc_w -40°C - +70/g113C Dimensions Inches (L × W × H) Millimeters (L × W × H) 7.41 × 3.47 × 1.50 188 × 88 × 38 With mounting ear 8.74 ×3.47 × 1.50 222 × 88 × 38 Net Weight - 1250 g - Note: All specifications are typical at 25 /g113C unless otherwise stated. Environmental Specifications Parameter Min. Typ. Max. Notes Operating Temperature -40 ć - +70 ć Humidity: 10% RH to 100% RH See Derating Curve for more details Storage Temperature -40 ć - +85 ć Humidity: 5% RH to 100% RH Safety & EMC Compliance Safety Category Standard CE EN61347-1,EN61347-2-13 EMI Standards Notes EN 55015(1) Conducted emission Test & Radiated emission Test EN 61000-3-2 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker FCC Part15(1) ANSI C63.4 Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cau se harmful interference, and [2] this device must accept any interference received, including interference that may cause undesired Operation. EMS Standards Notes EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS DISCOUNTINUED ee life DEDnting ear nti 8.74 ×3.47 × 13.47 222 × 88 × 88 UENUN ed.d NNTINTI M TITITINTI+70 +70 ćć HH NTNT - +85 - ć NUNUNUNOUOUOU UL8750, UL1310, ULUL8750, UL1310, U OC EN61347-1,ENEN61347-1,EN COCSCSC rds SCSCCSC 50155015(1)(1) Con SCSC N 61000-3-2 000-3-2 ISSEN 61000-3-3 EN 61000-3-3 DIS CC PaCC Pa DI
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 75W Constant Current IP67 Driver/g3ESC-075SxxxDT(ST) Rev. K Safety & EMC Compliance (Continued) EMS Standards Notes EN 61000-4-5 Surge Immunity Test: AC Power Line: line to line 4 kV, line to earth 6 kV EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips EN 61547 Electromagnetic Immunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. Derating Curve Lifetime vs. Case Temperature Curve DISCOUNTINUED DD pment pmen DED a luminaire that contaa luminaire that conta re itself.e itself. erature Curve ature Curv
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 75W Constant Current IP67 Driver/g3ESC-075SxxxDT(ST) Rev. K Efficiency vs Load (350mA Model) Power Factor Characteristics Dimming Control Parameter Min. Typ. Max. Notes 12V output voltage (Vaux) 10.8 V 12 V 13.2 V Vaux source current 10 mA 15 mA 20 mA Absolute maximum voltage on the 0~10V input pin -2 V - 15 V Source current on 0~10V input pin 150 [' 200 [' 250 [' The dimmer control is operated from an input signal of 1 – 10 Vdc. Recommended implementations are provided below. DmaxmaxDI 2V output voltage (Va2V output voltage (VISCOUNTINUED Control Control DISDIS Parameter ISDI source currsource cur DD
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 75W Constant Current IP67 Driver/g3ESC-075SxxxDT(ST) Rev. K Implementation Notes: 1. The dimmer can also be replaced by an active 0-10V voltage source signal or passive components like resistors and zener. 2. The dimming signal is allowed to be less than 1V, when it is between 0 and 1 V, the output level is 10%. 3. Do NOT connect the Gray Wire (Dim-) to Blue Wire (V-) together. 4. The dimming section is not isolated with output. 5. If 0-10V dimming is not used, Dim + can be either open or connected to Vaux. Mechanical Outline ESC-075SxxxDT V+ (RED) V- (BLUE) PURPLE GRAY DIMMING WIRE(UL 21996 3*22AWG 5.0) BLACK/WHITE AC/L (BLACK) AC/N (WHITE) GND (GREEN) INPUT(UL STW 3*18AWG 9.5) OUTPUT (UL SJTW 2*18AWG 7.3) Unspecified tolerance:±1 PROJ: Tc DISCOUNTINUED ce signal or passive ce signal or passive between 0 and 1 V,between 0 and together. toget open or connected topen or connect COCOCOCOCOCOCOCOCOCOCOCOCOCOCOCOCOCOCOCOOUOUOOOUOUOUOUOUOUOUOUOUOUOUOUOUOUOUOUOCOOCOCOCOOCOCOCOCOCOCOCOCOCOCOCOCOCOCOCOCOOOOOOOOOOOOOOOOOOUNOUNUNUNUNUNUN COOCOCOCOOOOOUOOUUUUU COOCOSSISS OOOOO ISCOCOCOOO ISIIIIIIIIISIISISIIISIIIISISCOSS TcTc OO
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 75W Constant Current IP67 Driver/g3ESC-075SxxxDT(ST) Rev. K ESC-075SxxxST V+ (RED) V- (BLUE) AC/L (BLACK) AC/N (WHITE) GND (GREEN) INPUT (UL STW 3*18AWG 9.5) OUTPUT (UL SJTW 2*18AWG 7.3) Unspecified tolerance:±1 PROJ: Tc RoHS Compliance Our products comply with the European Directive 2011/65/EC, calling for the elimination of lead and other hazardous substances from electronic products. DISCOUNTINUED NUNUNU DDDDD NNNN EEEEEEEEEEEEEEEEEEEE NUNUNUNUU DDDDDDDDDDDDDDDDDD II DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD 11/65/EC, calling for/65/EC, calling
Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales@inventronics-co.com 75W Constant Current IP67 Driver/g3ESC-075SxxxDT(ST) Rev. K
Revision History
Rev. Description of Change Item From To 2011-06-22 A First Release / / 2011-08-03 B Output Specifications- Turn-on Delay Time 2 s 3 s 2011-09-22 C CE,FCC / Added 2012-02-13 D OTP Latch Mode Auto Recovery Mode 2012-06-05 E Notes of Life time / Updated Life time curve / Added EN61000-4-5 line to line 2 kV, line to earth 4 kV line to line 4 kV, line to earth 6 kV 2012-07-17 F Max Case Temperature / Updated 2012-08-02 G Class 2 of models / Updated Inrush Current 60 A 135 A 2012-09-26 H Min PF / Added EFF Curve, PF Curve / Added Typical MTBF & Life time / Added Life time Curve / Added 2013-08-06 I 1400mA to be class 2 model / / 2014-04-09 J Operating Temperature -35 ć -40 ć Derating curve / Updated 2017-06-05 K Format / Updated Features / Updated Description / Updated General Specifications Lifetime Updated General Specifications Case Temperature Operating Case Temperature for Safety Tc_s General Specifications Operating Case Temperature for Warranty Tc_w Updated General Specifications With mounting ear Added General Specifications Net Weight Updated Safety & EMC Compliance / Updated Lifetime vs. Case Temperature Curve / Updated Mechanical Outline / Updated ed d D Auto Recovery ModeAuto Recovery Mode EDE Updated Update EDUE Added Added UEUE 2 kV, line to 2 kV, l line toine eartear UEUENUUN60 A 60 TINT / / TINT NTNT NTNT UNN2 model mod UN erature erature OU rve e OU 7-06-05 K 7-06-05 O atures ures CO Description Description COS General Specificeneral Specific SCS General Sral S SCDIISGeG DIISDIISDDDD