UPG2151T5K

UPG2151T5K CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

FEATURES

NEC's COMPACT ½W L, S-BAND SPDT SWITCH

DESCRIPTION

NEC's UPG2151T5K is a GaAs MMIC L, S-band SPDT switch for mobile phones and other L, S-band size restricted applications. This device can operate from 0.5 to 3 GHz with low insertion loss and high isolation. The UPG2151T5K is housed in a 6-pin Pb Free low profile package suitable for high-density surface mounting, and is a packaged alternative to die for usage in modules.

APPLICATIONS

• Cellular and cordless telephones
• BluetoothTM , ZigBee
• Short Range Wireless
• Alternative to die usage California Eastern Laboratories

ORDERING INFORMATION

Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: UPG2151T5K-A Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.

• SWITCH CONTROL VOLTAGE: Vcont (H) = 1.8 to 5.3 V (3.0 V TYP.) V cont (L) = −0.2 to +0.2 V (0 V TYP.)
• LOW INSERTION LOSS: 0.30 dB TYP. @ 0.5 to 1.0 GHz 0.35 dB TYP. @ 1.0 to 2.0 GHz 0.40 dB TYP. @ 2.0 to 2.5 GHz 0.50 dB TYP. @ 2.5 to 3.0 GHz
• HIGH ISOLATION: 25 dB TYP. @ 0.5 to 1.0 GHz 18 dB TYP. @ 1.0 to 2.0 GHz 17 dB TYP. @ 2.0 to 2.5 GHz 13 dB TYP. @ 2.5 to 3.0 GHz
• POWER HANDLING:
• HIGH-DENSITY SURFACE MOUNTING: 6-pin TSON package (1.0 × 1.0 × 0.4 mm)
• Pb FREE PART NUMBER PACKAGE MARKING SUPPLYING FORM UPG2151T5K-E2-A 6-pin TSON G1 • Embossed tape 8 mm wide
• Pins 1, 6 face the perforation side of the tape
• Qty 5 kpcs/reel PRELIMINARY PRODUCT INFORMATION

ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) RECOMMENDED OPERATING RANGE (TA = 25°C, unless otherwise specified) PIN CONNECTIONS PIN NO. PIN NAME

1 OUTPUT1

2 GND

3 OUTPUT2

4 Vcont2

5 INPUT

6 Vcont1

PARAMETER SYMBOL MIN. TYP. MAX. UNIT Switch Control Voltage (H) Vcont(H) 1.8 3.0 5.3 V Switch Control Voltage (L) Vcont(L) −0.2 0 0.2 V Note |Vcont1-Vcont2| ≤ 6.0 V Top View Top View Bottom View 6 1 6 1 TRUTH TABLE PARAMETER SYMBOL RATINGS UNIT Switch Control Voltage Vcont +6.0 Note V Input Power Pin +30 dBm Operating Ambient Temperature TA −45 to +85 °C Storage Temperature Tstg −55 to +150 °C Vcont1 Vcont2 INPUT-OUTPUT1 INPUT-OUTPUT2 Low High OFF ON High Low ON OFF

ELECTRICAL CHARACTERISTICS

(TA = +25°C, Vcont (H) = 2.6 to 3.0 V, Vcont (L) = 0 V, DC blocking capacitors value = 56 pF, unless otherwise specified) UPG2151T5K UPG2151T5K Notes 1. P in (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of linear range. 2. P in (1 dB) is the measured input power level when the insertion loss increases 1 dB more than that of linear range. PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Insertion Loss 1 Lins1 f = 0.5 to 1.0 GHz − 0.30 0.45 dB Insertion Loss 2 Lins2 f = 1.0 to 2.0 GHz − 0.35 0.50 dB Insertion Loss 3 Lins3 f = 2.0 to 2.5 GHz − 0.40 0.55 dB Insertion Loss 4 Lins4 f = 2.5 to 3.0 GHz − 0.50 0.65 dB Isolation 1 ISL1 f = 0.5 to 1.0 GHz 22 25 − dB Isolation 2 ISL2 f = 1.0 to 2.0 GHz 15 18 − dB Isolation 3 ISL3 f = 2.0 to 2.5 GHz 14 17 − dB Isolation 4 ISL4 f = 2.5 to 3.0 GHz 10 13 − dB Input Return Loss RLin f = 0.5 to 3.0 GHz − 20 − dB Output Return Loss RLout f = 0.5 to 3.0 GHz − 20 − dB 0.1 dB Loss Compression Input Power Note 1 1 dB Loss Compression Input Power Note 2 Pin (1 dB) f = 2.0/2.5 GHz, 2.6 V − +24.0 − dBm 2nd Harmonics 2f0 f = 2.0/2.5 GHz, Pin = +16 dBm 65 75 − dBc 3rd Harmonics 3f0 f = 2.0/2.5 GHz, Pin = +16 dBm 65 75 − dBc Switch Control Current Icont − 0.2 20 μA Switch Control Speed tSW 50% CTL to 90/10% RF − 10 200 ns

Note C0 : 56 pF The application circuits and their parameters are for reference only and are not intended for actual design-ins. Vcont1 Vcont2 OUTPUT1 OUTPUT2 INPUT C0 Note C0C0 1,000 pF1,000 pF 456 321

6-PIN TSON (UNIT: mm) UPG2151T5K 0.35 0.35 571.0 0.1 .XAM4.0 0.15 P er ilminary 1.0 51.0

RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Soldering Conditions Condition Symbol Infrared Reflow Peak temperature (package surface temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Time at temperature of 220°C or higher : 60 seconds or less Preheating time at 120 to 180°C : 120±30 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below IR260 VPS Peak temperature (package surface temperature) : 215 °C or below Time at temperature of 200°C or higher : 25 to 40 seconds Preheating time at 120 to 150°C : 30 to 60 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below VP215 Wave Soldering Peak temperature (molten solder temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Preheating temperature (package surface temperature) : 120 °C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below WS260 Partial Heating Peak temperature (pin temperature) : 350°C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below HS350 Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. A Business Partner of NEC Compound Semiconductor Devices, Ltd. 03/04/2005 Caution Do not use different soldering methods together (except for partial heating).

4590 Patrick Henry Drive

Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A -AZLead (Pb) < 1000 PPM Not Detected (*) Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and ac curate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.