UPG2150T5L CEL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

DESCRIPTION

The uPG2150T5L is a GaAs MMIC SP3T switch for Bluetooth & wireless LAN. The device can operate from 500MHz to 2.5GHz, having the low insertion loss and high isolation.

FEATURES

  • Operating frequency : f = 0.5 to 2.5 GHz
  • Low insertion loss : LINS = 0.5 dB TYP. @ f = 2.5GHz, ANT to RF1,RF2 0.6dB TYP. @ f = 2.5 GHz, ANT to RF3
  • Handling power : Pin (1 dB) = +31 dBm TYP. @ f = 2.5GHz, ANT to RF1,RF2 +25 dBm TYP. @ f = 2.5 GHz, ANT to RF3
  • Control voltage : Vcont = +2.85 V/0 V
  • High isolation : ISL = 35dB TYP. @ f =2.5 GHz, ANT to RF3 (ON) )NO(2,1FR ot TNA ,zHG 5.2 = f @ .PYT Bd81
  • 12-pin plastic TSQFN package (2.0 × 2.0 × 0.37 mm) APPLICATION
  • Bluetooth & 802.11b/g

ORDERING INFORMATION

mroF gniylppuS gnikraM egakcaP rebmuN traP uPG2150T5L-E2-A 12-pin plastic TSQFN 2150 • Embossed tape 8 mm wide

  • Pin 10,11,12 face the perforation side of the tape
  • Qty 3 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: uPG2150T5L PRELIMINARY DATA SHEET Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. GaAs MMIC SP3T SWITCH FOR BLUETOOTH & 802.11b/g GaAs INTEGRATED CIRCUIT UPG2150T5L Document No. 1st version Date Published DEC. 2004 CP(K)

PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM Pin No. Pin Name

1 ANT

2 GND

3 Vcont2

4 RF2

5 GND

6 RF3

7 Vcont3

8 GND

9 Vcont1

10 RF1

11 GND

12 GND

Vcont1 Vcont2 Vcont3 ANT-RF1 ANT-RF2 ANT-RF3 2.3 to 3.6 V 0 ± 0.2 V 0 ± 0.2 V ON OFF OFF 0 ± 0.2 V 2.3 to 3.6 V 0 ± 0.2 V OFF ON OFF 0 ± 0.2 V 0 ± 0.2 V 2.3 to 3.6 V OFF OFF ON ABSOLUTE MAXIMUM RATINGS (TA = +25°C, unless otherwise specified) Parameter Symbol Ratings Unit Switch Control Voltage Vcont −6.0 to +6.0 Note 1 V Input Power@ Ant to RF1,2 Pin +34 dBm Input Power@ Ant to RF3 Pin +28 dBm Operating Ambient Temperature TA −45 to +85 °C Storage Temperature Tstg −55 to +150 °C Notes 1. | Vcont1 − Vcont2 | ≤ 6.0 V 2. Mounted on double-sided copper-clad 50 × 50 × 1.6 mm epoxy glass PWB, TA = +85°C <Top View> <Bottom View> PRELIMINARY DATA SHEET 2 UPG2150T5L

RECOMMENDED OPERATING RANGE (TA = +25°C) Parameter Symbol MIN. TYP. MAX. Unit Operating Frequency f 0.5 − 2.5 GHz Switch Control Voltage (H) Vcont (H) 2.3 2.85 3.6 V Switch Control Voltage (L) Vcont (L) −0.2 0 0.2 V ELECTRICAL CHARACTERISTICS (TA =+25°C, Vcont = 2.85V/0 V, ZO = 50 Ω , DC blocking capacitors value: 56 pF, Each port, unless otherwise specified) Parameter Symbol Pass Test Conditions MIN. TYP. MAX. Unit f = 0.5 to 1.0GHz − 0.40 0.55 dB f = 1.0 to 2.0GHz − 0.45 0.60 dB ANT to RF1,2 f = 2.0 to 2.5GHz − 0.50 0.65 dB f = 0.5 to 1.0GHz − 0.45 0.60 dB f = 1.0 to 2.0GHz − 0.55 0.70 dB Insertion Loss LINS ANT to RF3 f = 2.0 to 2.5GHz − 0.60 0.75 dB f = 0.5 to 1.0GHz 29 32 − dB f = 1.0 to 2.0GHz 30 35 dB ANT to RF3 OFF @ANT to RF1,2 ON RF1 to RF3 OFF @ANT-RF1ON f = 2.0 to 2.5GHz 30 35 dB f = 0.5 to 1.0GHz 23 26 − dB f = 1.0 to 2.0GHz 17 20 dB Isolation ISL ANT to RF1 OFF @ANT to RF2,3 ON ANT to RF2 OFF @ANT to RF1,3 ON f = 2.0 to 2.5GHz 15 18 dB Input Return Loss RLin ANT to RF1,2,3 f = 0.5 to 2.5GHz 15 20 − dB Output Return Loss RLout ANT to RF1,2,3 f = 0.5 to 2.5GHz 15 20 − dB Switch Control Current Icont ANT to RF1,2,3 RF Non − 0.1 1.0 µA f = 1.0 GHz f = 2.0 GHz Pin (1 dB) ANT to RF1,2, f = 2.5 GHz 28 31 − dBm f = 1.0 GHz f = 2.0 GHz Input Power at 1dB Compression Point ANT to RF3 f = 2.5 GHz 20 25 − dBm Switch Control Speed tSW ANT to RF1,2,3 - − 50 − ns PRELIMINARY DATA SHEET 3

The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. PRELIMINARY DATA SHEET 4

RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. gniredloS dohteM gniredloS lobmyS noitidnoC snoitidnoC Infrared Reflow Peak temperature (package surface temperature) : 260°C or below ssel ro sdnoces 01 : erutarepmet kaep ta emiT Time at temperature of 220°C or higher : 60 seconds or less Preheating time at 120 to 180° 021 : C ±30 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below IR260 512 : )erutarepmet ecafrus egakcap( erutarepmet kaeP SPV °C or below Time at temperature of 200°C or higher : 25 to 40 seconds Preheating time at 120 to 150° sdnoces 06 ot 03 : C Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below VP215 Wave Soldering Peak temperature (molten solder temperature) : 260°C or below ssel ro sdnoces 01 : erutarepmet kaep ta emiT Preheating temperature (package surface temperature) : 120°C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below WS260 Partial Heating Peak temperature (pin temperature) : 350°C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below HS350 Caution Do not use different soldering methods together (except for partial heating). PRELIMINARY DATA SHEET 6

4590 P a t r ick Hen r y Drive

San t a C l ara, CA 9505 4- 181 7 Teleph o n e : ( 408) 919- 25 00 Facsim ile: ( 408 ) 988- 027 9 Subject: Compliance with EU Dire ctives CEL certifies, to its kno w ledge, that semicondu ctor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electron ic equipment (RoHS) an d the requir e ments of EU Directive 2003/11/EC Restriction o n Penta and Octa BDE. CEL Pb-free products ha ve the same base part n u mber with a suffix added. The suffix –A indicates that the device is Pb-fre e. The –AZ suffix is use d to designa te devices containing Pb which are exempted from the requirement of Ro HS directive (*). In all cases the de vices have Pb-free terminals. All devices with these suffixes meet the require ments of the RoHS directive. This statu s is based on CEL’s understanding of t he EU Directives and kn owledge of the materials that go into its pr oducts as of the date of disclo s ure o f this inform ation. Re st rict e d S u bst a n c e per RoHS Con c e n tratio n Limit per RoHS (value s are n o t yet fixed) Con c e n tratio n contai ned in CEL devices - A - A Z Lead (P b) < 100 0 PPM Not Dete cted (*) Mercury < 100 0 PPM Not Dete cted Cadmi u m < 100 PPM Not Dete cted Hexavale nt Chromi um < 100 0 PPM Not Dete cted PBB < 1000 PPM Not Detec t ed PBDE < 1000 PPM Not Detec t ed If you should have any additional q uestions reg a rding our d e vices and compliance t o environme n tal standards, p l ease do not hesitate to contact your local representative. Important Inf o rm ation and Disclaimer: Infor m ation provided b y CEL on its w ebsite or in other communi cations concertin g the subs tance content of its pro ducts represents know ledge and b e lief as of t he date that it is provided. CEL bases its know ledge a n d belief on informa t ion provided b y t h ird parties and make s no representa t ion or w a rran t y a s to the accurac y of such information. Efforts are u nder w a y to b e tte r integrate informa t ion from third pa rties. CEL has ta ken and cont inue s to take reasona ble steps to provide repr esentative and ac cur a te information but ma y not h a ve conducted destructive testing or chemical analy s is on incoming ma terials and chemicals. CEL and CE L suppliers consid er certain inform ation to be pro p ri etar y , and thus C AS numbers and other limited information ma y not be availab le for release. In no event shall CEL’s liability ari s ing out of such information e x cee d the total purch ase price of the CEL part ( s) at issue s old by CEL to customer on an annual basis. See CEL Te rms and Conditions f o r additional cl arification of w a rran t ies and liability .