UPG2110TB-E3-A

UPG2110TB CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

SYMBOLS PARAMETERS AND CONDITIONS UNITS MIN TYP MAX f Operating Frequency MHz 1850 1910 IDD Total Current P OUT = +8 dBm, VAGC = 2.5 V mA 20 30 IAGC AGC Control Current VAGC = 0.5 to 2.5 V µA 200 500 GP Power Gain PIN = -18 dBm, VAGC = 2.5 V dB 17.5 19.5 G Variable Gain Range P IN = -18 dBm, VAGC = 0.5 to 2.5 V dB 30 35 PADJ1 Adjacent Channel Power Leakage 1 POUT= +8 dBm, VAGC = 2.5 V, dBc 60 55 ∆f = ±50 KHz, 21 kHz Bandwidth PADJ2 Adjacent Channel Power Leakage 2 POUT= +8 dBm, VAGC = 2.5 V, dBc 70 65 ∆f = ±100 KHz, 21 kHz Bandwidth NEC's UPG2110TB is a GaAs MMIC for PA driver amplifiers with variable gain functions which was developed for L-band applications. The device can operate with 3.0 V, having high gain and low distortion.

DESCRIPTION

FEATURES

L-BAND PA DRIVER AMPLIFIER

• LOW VOLTAGE OPERATION: VDD1 = VDD2 = 3.0 V, fRF = 1850 to 1910 MHz @ POUT = +8 dBm
• LOW DISTORTION: PADJ1 = 60 dBc TYP @ VDD = 3.0 V, POUT = +8 dBm, VAGC = 2.5 V
• LOW CURRENT OPERATION : IDD =20 mA TYP @ VDD = 3.0 V, POUT = +8 dBm, VAGC = 2.5 V
• EXTERNAL INPUT AND OUTPUT MATCHING
• VARIABLE GAIN CONTROL FUNCTION : G = 35 dB TYP @ V AGC = 0.5 to 2.5 V
• 6 PIN SUPER MINI-MOLD PACKAGE UPG2110TB ELECTRICAL CHARACTERISTICS (TA = 25 °C,VDD1 = VDD2 = +3.0 V, π/4DQPSK modulated input signal, external input and output matching, unless otherwise specified) PRELIMINARY DATA SHEET OUTLINE DIMENSIONS (Units in mm) PACKAGE OUTLINE S06 +0.1 DOT ON BOTTOM SIDE +0.1 -0.50~0.1 0.2 0.15 1 6 40.65 1.3 2.0–0.2 0.65 2.1–0.1 1.25–0.1 0.9 – 0.1 0.7 California Eastern Laboratories APPLICATION
• DIGITAL CELLULAR PDC, IS-136

ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS VDD Supply Voltage V 6.0 VAGC AGC Control Voltage V 6.0 PIN Input Power dBm 8 PT Total Power Dissipation2 mW 200 TOP Operating Temperature °C -30 to +90 TSTG Storage Temperature °C -35 to +150 SYMBOLS PARAMETERS UNITS MIN TYP MAX VDD Supply Voltage V +2.7 +3.0 +3.3 PIN Input Power dBm -18 -15 VAGC AGC Control Voltage V 0 2.5 RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Notes: 1. Operation excess of any one of these parameters may result in permanent damage. 2. Mounted on a 50 x 50 x 1.6mm double copper clad epoxy glass PWB, T A = +85 °C 1. VDD1 2. GND 3. VDD2 & Output 4. VAGC 5. GND 6. Input (Bottom View)(Top View) 123 654 G1Y OUT IN C5L3 VDD1 VDD2 VAGC C8C6 G1Y Note: 1. VDD1 = VDD2 = +3.0 V, f = 1880 MHz. PIN NO. CONNECTION C1, C3, C6, C7, C8 1000 pF C2 1.5 pF C4 3.3 pF C5 1.8 pF L1 1.8 nH L2 5.6 nH L3 8.2 nH R1 1 kΩ (Top View) PART NUMBER QTY

ORDERING INFORMATION

UPG2110TB-E3-A 3 kpcs Per Reel Note: 1. Embossed tape, 8 mm wide. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 01/04/2001DATA SUBJECT TO CHANGE WITHOUT NOTICE Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.

4590 Patrick Henry Drive

Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A -AZLead (Pb) < 1000 PPM Not Detected (*) Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substan ce content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway t o better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and ac curate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.