UPG2022T5G-E1-A

UPG2022T5G CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

UPG2022T5GNEC's 4.8 TO 5.85 GHz HIGH POWER GaAs MMIC SPDT SWITCH California Eastern Laboratories

• OPERATING FREQUENCY: f = 4.8 to 5.85 GHz
• LOW INSERTION LOSS: 0.8 dB TYP. @ f = 4.9 GHz 0.7 dB TYP. @ f = 5.2 GHz 0.8 dB TYP. @ f = 5.8 GHz
• POWER HANDLING: Pin (0.1 dB) = +31 dBm TYP. @ f = 4.8 to 5.85 GHz
• CONTROL VOLTAGE: Vcont = +2.8 V/0 V
• HIGH ISOLATION: (Between INPUT and OUTPUT) = 23 dB TYP . @ f = 5.2 GHz (Between OUTPUT1 and OUTPUT2) = 22 dB TYP. @ f = 5.2
• INPUT/OUTPUT RETURN LOSS: 10 dB MIN. @ f = 4.8 to 5.85 GHz
• SWITCHING SPEED: 20 ns @ tRISE/tFALL (10/90% RF)
• 6-PIN PLASTIC SON PACKAGE:
• LEAD FREE

FEATURES

ORDERING INFORMATION

Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: UPG2022T5G NEC's UPG2022T5G is a high power GaAs MMIC SPDT (Single Pole Double Throw) switch. This device can operate from 4.8 to 5.85 GHz with low insertion loss. It is housed in a 6-pin plastic SON package.

DESCRIPTION

• 5 GHz BAND WLAN
• 5 GHz CORDLESS PHONES
• 5 GHz ELECTRONIC TOLL COLLECTION
• 5 GHz FIXED WIRELESS ACCESS

APPLICATIONS

PART NUMBER PACKAGE MARKING SUPPLYING FORM UPG2022T5G-E1-A 6-pin plastic SON G4H • Embossed tape 8 mm wide

• Pin 1 face the perforation side of the tape
• Qty 3 kpcs/reel

ABSOLUTE MAXIMUM RATINGS (TA =+25ºC, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Switch Control Voltage Vcont −6.0 to +6.0 Note V Input Power Pin +36 dBm Operating Ambient Temperature TA −45 to +85 °C Storage Temperature Tstg −55 to +150 °C Notes | Vcont1 − Vcont2 | ≤ 6.0 V (Top View) G4H (Bottom View) PIN NO. PIN NAME

1 OUTPUT1

2 GND

3 OUTPUT2

4 Vcont2

5 INPUT

6 Vcont1

PARAMETER SYMBOL MIN. TYP. MAX. UNIT Switch Control Voltage (H) Vcont (H) 2.7 2.8 3.3 V Switch Control Voltage (L) Vcont (L) −0.2 0 0.2 V Operating Frequency f 4.8 5.85 GHz Operating Ambient Temperature TA −40 +25 +85 °C RECOMMENDED OPERATING RANGE (TA =+25ºC, unless otherwise specified)

ELECTRICAL CHARACTERISTICS (TA = +25°C, Vcont = 2.8 V/0 V, ZO = 50 Ω, DC blocking capacitors = 27 pF, Each port, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Insertion Loss LINS f = 4.9 GHz − 0.8 1.1 dB f = 5.2 GHz − 0.7 1.1 dB f = 5.8 GHz − 0.8 1.1 dB Isolation 1 (between OUTPUT1 and OUTPUT2) ISL1 f = 4.9 GHz 13 18 − dB f = 5.2 GHz 15 22 − dB f = 5.8 GHz 15 20 − dB Input Return Loss RLin f = 4.9 GHz 10 22 − dB f = 5.2 GHz 10 29 − dB f = 5.8 GHz 10 19 − dB Output Return Loss RLout f = 4.9 GHz 10 21 − dB f = 5.2 GHz 10 29 − dB f = 5.8 GHz 10 20 − dB 0.1 dB Gain Compression Input Power Pin (0.1 dB) f = 4.9 to 5.8 GHz 30 31 − dBm Switching Control Speed tSW tRISE/tFALL (10/90% RF) − 20 − ns Switching Control Current Icont − 0.5 1 μA STANDARD CHARACTERISTICS FOR REFERENCE (TA = +25°C, Vcont = 2.8 V/0 V, ZO = 50 Ω, DC blocking capacitors = 27 pF, Each port, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Isolation 2 (between INPUT and OUTPUT) ISL2 f = 4.9 GHz − 18 − dB f = 5.2 GHz − 23 − dB f = 5.8 GHz − 21 − dB

The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. Vcont1 Vcont2INPUT 1 000 pF 1 000 pF 27 pF 6 5 4 1 2 3 OUTPUT1 OUTPUT2 27 pF27 pF TRUTH TABLE OF SWITCHING BY CONDITION OF CONTROL VOLTAGE VCONT1 VCONT (H) VCONT (L) VCONT2 VCONT (H) INPUT OUTPUT1 OUTPUT2 Note INPUT OUTPUT1 OUTPUT2 VCONT (L) INPUT OUTPUT1 OUTPUT2 INPUT OUTPUT1 OUTPUT2 Note Note In case of V CONT1 = V CONT2 = High or V CONT1 = V CONT2 = Low, (that is same control voltage for both pins), input signal of INPUT (Pin 5) is output from OUTPUT1 (Pin 1) and OUTPUT2 (Pin 3).

6-PIN PLASTIC SON (UNIT:mm) 2.0 3.0 0.75±0.1 (Bottom View) 0.950.95 0.35+0.07 -0.05 0.7±0.1 0.19 0.7±0.1 0.29±0.1 0.29±0.1 0.25+0.07 -0.05

RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Soldering Conditions Condition Symbol Infrared Reflow Peak temperature (package surface temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Time at temperature of 220°C or higher : 60 seconds or less Preheating time at 120 to 180°C : 120±30 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below IR260 VPS Peak temperature (package surface temperature) : 215 °C or below Time at temperature of 200°C or higher : 25 to 40 seconds Preheating time at 120 to 150°C : 30 to 60 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below VP215 Wave Soldering Peak temperature (molten solder temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Preheating temperature (package surface temperature) : 120 °C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below WS260 Partial Heating Peak temperature (pin temperature) : 350°C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below HS350 Caution Do not use different soldering methods together (except for partial heating). Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. A Business Partner of NEC Compound Semiconductor Devices, Ltd. 05/18/2004

4590 Patrick Henry Drive

Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A -AZLead (Pb) < 1000 PPM Not Detected (*) Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and ac curate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.