UPG2008TK CEL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

FEATURES

NEC's L,S BAND ULTRA SMALL SPDT GaAs MMIC SWITCH

  • ULTRA SMALL 6 PIN RECESSED LEAD MINI-MOLD PACKAGE: Size: 1.5 x 1.1 x 0.55 mm
  • LOW INSERTION LOSS: L INS = 0.40 dB TYP at f = 1 GHz LINS = 0.60 dB TYP at f = 2.5 GHz
  • HIGH ISOLATION: ISOL = 25 dB TYP at f = 2.5 GHz UPG2008TK PRELIMINARY DATA SHEET OUTLINE DIMENSIONS (Units in mm) PACKAGE OUTLINE TK California Eastern Laboratories NEC's UPG2008TK is a Single Pole Double Throw (SPDT)GaAs MMIC switch, developed for applications in the 0.5 to 2.5 GHz frequency range. This device is housed in NEC's ultra small "TK" plastic surface mount package. This 6 pin recessed lead mini mold package has a footprint that is over 50% smaller than conventional small size SOT-363 package types. Package height is also reduced by 39% by incorporating a flat lead style. These tremendous size reductions make this switch an ideal device for small size portable applications and modules. NEC's stringent quality assurance and test procedures assure the highest performance. consistency and reliability.

DESCRIPTION

  • L, S band digital cellular or cordless handsets
  • PCS, Bluetooth, WLAN, and WLL applications PART NUMBER UPG2008TK PACKAGE OUTLINE TK SYMBOLS PARAMETERS AND CONDITIONS UNITS MIN TYP MAX LINS Insertion Loss f = 0.5 to 1.0 GHz dB 0.40 0.70 f = 1.0 to 2.0 GHz dB 0.50 0.80 f = 2.0 to 2.5 GHz dB 0.60 0.85 ISOL Isolation f = 0.5 to 2.5 GHz dB 22 25 RL IN Input Return Loss f = 0.5 to 2.5 GHz dB 13 20 RLOUT Output Return Loss f = 0.5 to 2.5 GHz dB 13 20 PIN(0.1dB) Input Power at 0.1 dB Compression f = 1.0 GHz1 dBm 20 PIN(1dB) Input Power at 1 dB Compression f = 1.0 GHz1 dBm 20 25 tsw Switching Speed ns 50 ICONT Control Current, at VCONT = 2.8 V/0 V, no RF signal µA 0.5 10 ELECTRICAL CHARACTERISTICS (Unless Otherwise Specified, TA = 25°C, VCONT1 = 2.8 V and VCONT2 = 0 V or VCONT1 = 0V and VCONT2 = 2.8 V, ZO = 50Ω, off chip DC blocking capacitor value, 51pF) Note: 1. PIN(0.1dB) or PIN(1dB) measured the input power level when the insertion loss increases to more than that of the linear range. All other characterisitics are measured in the the linear range. 0.48±0.050.48±0.05

PIN CONNECTIONS & INTERNAL BLOCK DIAGRAM UPG2008TK ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS VCONT Control Voltage V -6.0 to +6.0 2 PIN Input Power dBm 28 PT Total Power Dissipation W 0.15 TOP Operating Temperature °C -45 to +85 TSTG Storage Temperature °C -55 to +150 SYMBOLS PARAMETERS UNITS MIN TYP MAX VCONT(H) Control Voltage High V +2.5 +3.0 +5.3 VCONT(L) Control Voltage Low V -0.2 0 +0.2 RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. | V CONT1 – VCONT2 | ≤ 6.0 V EVALUATION BOARD PART NUMBER MARKING QTY Note: 1. Embossed tape, 8 mm wide, Pins 1,2,3 face perforation side. UPG2008TK-E2 G2R 5 kpcs Per Reel

ORDERING INFORMATION

PIN NO. CONNECTION

1 OUT1

2 GND

3 OUT2

VC1 6P L2MM SW T.F. for J- Contacts Ver. 1 OUT1 OUT2 3 4 G2R VCONT1 VCONT2 IN OUT2 OUT1 34 4 661 (Top View) (Bottom View) G2R TRUTH TABLE OF SWITCHING BY CONDITION OF VOLTAGE VCONT1 VCONT2 IN-OUT1 IN-OUT2 LOW HIGH ON OFF HIGH LOW OFF ON Note: 1. VCONT1 = 2.8 V, VCONT2 = 0V or VCONT2 = 0 V, VCONT1 = 2.8V, off chip DC blocking capacitors value C1=51pF, C2 = 1000pF (Bypass), Using NEC standard evaluation board. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. A Business Partner of NEC Compound Semiconductor Devices, Ltd. 08/30/2004