UPG181GR CEL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
DESCRIPTION
NEC's UPG181GR is intended for use in Direct Broadcast Satellite (DBS) applications within the Low Noise Block (LNB) down-converter for systems where at least two LNB outputs are required. It offers two intermediate frequency amplifier channels that can independently select 1 of 2 IF inputs. It is housed in a very small 16 pin plastic HTSSOP package and is available on tape-and-reel. The UPG181GR is easy to install and contributes to miniaturizing the systems. California Eastern Laboratories UPG181GRGaAs MMIC DBS TWIN IF SWITCH OUTLINE DIMENSIONS (Units in mm)FEATURES
- TWO INDEPENDENT IF CHANNELS
- INTEGRAL SWITCHING TO CHANNEL INPUT TO EITHER CHANNEL OUTPUT
- INSERTION LOSS PER CHANNEL: 5.0 dB TYP (ZO = 50 Ω)
- FREQUENCY RANGE:
950 MHz to 2150 MHz
- CHANNEL TO CHANNEL ISOLATION: 33 dB TYP
- SMALL 16 PIN HTSSOP PACKAGE
- AVAILABLE ON TAPE AND REEL PART NUMBER UPG181GR PACKAGE OUTLINE 16 pin HTSSOP SYMBOLS PARAMETERS AND CONDITIONS UNITS MIN TYP MAX LINS Insertion Loss, f = 0.95 GHz to 2.15 GHz dB — 5.0 7.0 ∆LINS Insertion Loss Flatness, | LINS (0.95 GHz)—L INS (1.7 GHz)| dB — 0.5 1.2 ∆LINS Insertion Loss Flatness, | LINS (0.95 GHz)—L INS (2.15 GHz)| dB — 0.8 1.5 ISOL Channel Isolation, f = 0.95 GHz to 1.7 GHz dB 30 33 — ISOL Channel Isolation, f = 1.7 GHz to 2.15 GHz dB 25 30 — RLOUT Output Return Loss, f = 0.95 GHz to 2.15 GHz dB 13 16 — ICONT Control Current, VCONT = +5 V/0 V, RF OFF µA — — 200 1.8 0.4 0.5 2.7 0.1 2.5 0.9±0.2 0.20±0.106.4±0.3 5.5±0.3 5.2±0.2 0.65±0.1 0.20±0.10 1.5 N 16 pin HTSSOP
ELECTRICAL CHARACTERISTICS
(TA = +25°C, unless otherwise specified, VCONT1 to VCONT4 = 0/+5 V, ZO = 50 Ω, LL, LR, RL, RR Each Port)
SYMBOLS PARAMETERS UNITS MIN TYP MAX VCONT(H) Control Voltage (High) V +4.5 +5 +5.5 VCONT(L) Control Voltage (Low) V -0.5 0 +0.5 SYMBOLS PARAMETERS UNITS RATINGS VCONT1,2,3,4 Control Voltage 1, 2, 3, 42 V -1 to +6 PTOT Total Power Dissipation3 W2 TA Operating Ambient Temp. °C -40 to +85 TSTG Storage Temperature °C -65 to +150 RECOMMENDED OPERATING CONDITIONS (TA = +25°C) ABSOLUTE MAXIMUM RATINGS1 (TA = +25°C) UPG181GR Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. | V CONT(H) — V CONT(L) | ≤ 6.0 V 3. Mounted on a 50x50x1.6 mm double copper clad epoxy glass PWB, T C = +85°C . TYPICAL PERFORMANCE CURVES (TA = +25°C, unless otherwise specified) INPUT RETURN LOSS vs. FREQUENCY OUTPUT RETURN LOSS vs. FREQUENCY Input Return Loss, RL IN (dB) Output Return Loss, RL OUT (dB) Frequency, f (GHz) Frequency, f (GHz) 2 3 -50 Start 0.050 000 000 GHz Stop 5.050 000 000 GHz log MAG 5 dB/div. -25 1. -17.37 dB
0.95 GHz
- -15.07 dB
1.7 GHz
- -13.41 dB
2.15 GHz
-50 Start 0.050 000 000 GHz Stop 5.050 000 000 GHz log MAG 5 dB/div. -25 1. -32.13 dB
- -19.73 dB
- -19.68 dB
INSERTION LOSS vs. FREQUENCY ISOLATION vs. FREQUENCY Insertion Loss, L INS (dB) Isolation, ISL (dB) Frequency, f (GHz) Frequency, f (GHz) 2 3 -20 Start 0.050 000 000 GHz Stop 5.050 000 000 GHz log MAG 2 dB/div. -10 1. -4.49 dB
- -4.93 dB
- -5.31 dB
-100 Start 0.050 000 000 GHz Stop 5.050 000 000 GHz log MAG 10 dB/div. -50 1. -54.70 dB
- -46.12 dB
- -40.84 dB
PART NUMBER PACKAGE QUANTITY UPG181GR-E1-A 16-pin Plastic HTSSOP 2500/Reel
ORDERING INFORMATION
Notes: 1. Embossed tape, 12 mm wide.
EVALUATION CIRCUIT (VCONT1 to VCONT4 = 0/+5 V, ZO = 50 Ω, DC Blocking Capacitor = 1000 pF) 16 15 14 13 12 11 10 9 12 34 5678 VCONT3 VCONT4 OUT 1 OUT 2 ZO = 50Ω ZO = 50Ω ZO = 50Ω 9 VCONT1 VCONT2 C = 1000 pF C = 1000 pF IN1 (L) IN2 (R) ZO = 50 Ω C = 1000 pF C = 1000 pF OUTPUT CONTROL PIN On-Channel OUT1 OUT2 V CONT1 VCONT2 VCONT3 VCONT4 L L Low High High Low L R Low High Low High R L High Low High Low R R High Low Low High IN1—OUT1 IN1—OUT2 IN1—OUT1 IN2—OUT2 IN2—OUT1 IN1—OUT2 IN2—OUT1 IN2—OUT2 CHANNEL SELECT TRUTH TABLE PIN NO. CONNECTION PIN NO. CONNECTION
1 IN2 9 OUT1
2 GND 10 GND
3 GND 11 GND
6 GND 14 GND
7 GND 15 GND
8 OUT2 16 IN1
PIN CONNECTION AND INTERNAL BLOCK DIAGRAM EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 01/15/2001DATA SUBJECT TO CHANGE WITHOUT NOTICE TOP VIEW Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A -AZLead (Pb) < 1000 PPM Not Detected (*) Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substan ce content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway t o better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and ac curate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.