UPC3221GV-E1-A

UC3221GV CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 19

Technical content

DESCRIPTION

The µPC3221GV is a silicon monolithic IC designed for use as AGC amplifier for digital CAT V, cable modem systems. This IC consists of gain control amplifier and video amplifier. The package is 8-pin SSOP suitable for surface mount. This IC is manufactured using our 10 GHz fT NESAT II AL silicon bipolar process. This process uses silicon nitride passivation film. This material can protect chip surface from external pollution and prevent corrosion/migration. Thus, this IC has excellent performance, uniformity and reliability.

FEATURES

• Low distortion : IM3 = 56 dBc TYP. @ single-ended output, Vout = 0.7 Vp-p/tone
• Low noise figure : NF = 4.2 dB TYP.
• Wide AGC dynamic range : GCR = 50 dB TYP. @ input prescribe
• On-chip video amplifier : Vout = 1.0 Vp-p TYP. @ single-ended output
• Supply voltage : VCC = 5.0 V TYP.
• Packaged in 8-pin SSOP suitable for surface mounting APPLICATION
• Digital CATV/Cable modem receivers

ORDERING INFORMATION

Part Number Package Supplying Form µPC3221GV-E1-A 8-pin plastic SSOP (4.45 mm (175)) • Embossed tape 8 mm wide

• Pin 1 indicates pull-out direction of tape
• Qty 1 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: µPC3221GV-A Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.

5 V AGC AMPLIFIER + VIDEO AMPLIFIER

BIPOLAR ANALOG INTEGRATED CIRCUIT µPC3221GV Document No. PU10171EJ03V0DS (3rd edition) The mark  shows major revised points. ©NEC Compound Semiconductor Devices, Ltd. 2002, 2004

INTERNAL BLOCK DIAGRAM AND PIN CONNECTIONS VCC INPUT1 INPUT2 VAGC GND1 OUTPUT1 OUTPUT2 GND2 AGC AMP. Video AMP. AGC Control (Top View) PRODUCT LINE-UP OF 5 V AGC AMPLIFIER Part Number ICC (mA) GMAX (dB) GMIN (dB) GCR (dB) NF (dB) IM3 (dBc) Note Package µPC3217GV 23 53 0 53 6.5 50 8-pin SSOP (4.45 mm (175)) µPC3218GV 23 63 10 53 3.5 50 µPC3219GV 36.5 42.5 0 42.5 9.0 58 µPC3221GV 33 60 10 50 4.2 56 Note f 1 = 44 MHz, f2 = 45 MHz, Vout = 0.7 Vp-p/tone, single-ended output Data Sheet PU10171EJ03V0DS 2 µPC3221GV

No. Pin Name Applied Voltage (V) Pin Voltage (V) Note Function and Application Internal Equivalent Circuit 1 VCC 4.5 to 5.5 − Power supply pin. This pin should be externally equipped with bypass capacitor to minimize ground impedance. ⎯⎯⎯ 2 INPUT1 − 1.29 Signal input pins to AGC amplifier. This pin should be coupled with capacitor for DC cut. 3 INPUT2 − 1.29 AGC Control 2 35 4 VAGC 0 to VCC − Gain control pin. This pin’s bias govern the AGC output level. Minimum Gain at VAGC : 0 to 0.5 V Maximum Gain at VAGC : 3 to 3.5 V Recommended to use AGC voltage with externally resister (example: 1 kΩ). AGC Amp. 5 GND2 0 − Ground pin. This pin should be connected to system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. ⎯⎯⎯ 6 OUTPUT2 − 2.28 Signal output pins of video amplifier. This pin should be coupled with capacitor for DC cut. 7 OUTPUT1 − 2.28 8 GND1 0 − Ground pin. This pin should be connected to system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. All ground pins must be connected together with wide ground pattern to decrease impedance difference. ⎯⎯⎯ Note Pin voltage is measured at VCC = 5.0 V. Data Sheet PU10171EJ03V0DS 3 µPC3221GV

Parameter Symbol Test Conditions Ratings Unit Supply Voltage VCC TA = +25°C 6.0 V Gain Control Voltage Range VAGC TA = +25°C 0 to VCC V Power Dissipation PD TA = +85°C Note 250 mW Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −55 to +150 °C Note Mounted on double-sided copper-clad 50 × 50 × 1.6 mm epoxy glass PWB RECOMMENDED OPERATING RANGE Parameter Symbol Test Conditions MIN. TYP. MAX. Unit Supply Voltage VCC 4.5 5.0 5.5 V Operating Ambient Temperature TA VCC = 4.5 to 5.5 V −40 +25 +85 °C Gain Control Voltage Range VAGC 0 − 3.5 V Operating Frequency Range fBW 10 45 100 MHz Data Sheet PU10171EJ03V0DS 4 µPC3221GV

ELECTRICAL CHARACTERISTICS

(TA = +25°C, VCC = 5 V, f = 45 MHz, ZS = 50 Ω, ZL = 250 Ω, single-ended output) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit DC Characteristics Circuit Current ICC No input signal Note 1 26 33 41 mA AGC Pin Current IAGC No input signal, VAGC = 3.5 V Note 1 − 16 50 µA AGC Voltage High Level VAGC (H) @ Maximum gain Note 1 3.0 − 3.5 V AGC Voltage Low Level VAGC (L) @ Minimum gain Note 1 0 − 0.5 V RF Characteristics Maximum Voltage Gain GMAX VAGC = 3.0 V, Pin = −60 dBm Note 1 57 60 63 dB Middle Voltage Gain 1 GMID1 VAGC = 2.2 V, Pin = −60 dBm Note 1 47.5 50.5 53.5 dB Middle Voltage Gain 2 GMID2 VAGC = 1.2 V, Pin = −30 dBm Note 1 18 21 24 dB Minimum Voltage Gain GMIN VAGC = 0.5 V, Pin = −30 dBm Note 1 6 10 14 dB Gain Control Range (input prescribe) GCRin VAGC = 0.5 to 3.0 V Note 1 43 50 − dB Gain Control Range (output prescribe) GCRout Vout = 1.0 Vp-p Note 1 36 40 − dB Gain Slope Gslope Gain (@ VAGC = 2.2 V) − Gain (@ VAGC = 1.2 V) Note 1 26.5 29.5 32.5 dB/V Maximum Output Voltage Voclip VAGC = 3.0 V (@ Maximum gain) Note 1 2.0 2.8 − Vp-p Noise Figure NF VAGC = 3.0 V (@ Maximum gain) Note 3 − 4.2 5.7 dB 3rd Order Intermodulation Distortion 1 IM31 f1 = 44 MHz, f2 = 45 MHz, ZL = 250 Ω, Pin = −30 dBm/tone, Vout = 0.7 Vp-p/tone (@ single-ended output) Note 1 43 47 − dBc 3rd Order Intermodulation Distortion 2 IM32 f1 = 44 MHz, f2 = 45 MHz, ZL = 250 Ω, VAGC = 3.0 V (@ Maximum gain), Vout = 0.7 Vp-p/tone (@ single-ended output) Note 1 50 56 − dBc Gain Difference of OUTPUT1 and OUTPUT2 ∆G VAGC = 3.0 V, Pin = −60 dBm, ∆G = G (@ Pout1) − G (@ Pout2) Note 1, 2 −0.5 0 +0.5 dB Notes 1. By measurement circuit 1 2. By measurement circuit 2 3. By measurement circuit 3 Data Sheet PU10171EJ03V0DS 5 µPC3221GV

STANDARD CHARACTERISTICS (TA = +25°C, VCC = 5 V, ZS = 50 Ω) Parameter Symbol Test Conditions Reference Value Unit Noise Figure 2 NF2 Gain reduction = −10 dBm Note 2 6.0 dB Noise Figure 3 NF3 Gain reduction = −20 dBm Note 2 9.5 dB Output Voltage Vout Pin = −56 to −16 dBm Note 1 1.0 Vp-p Input Impedance Zin VAGC = 0.5 V, f = 45 MHz Note 3 0.9 k − j1.4 k Ω Output Impedance Zout VAGC = 0.5 V, f = 45 MHz Note 3 9.0 + j1.9 Ω Input 3rd Order Distortion Intercept Point IIP3 VAGC = 0.5 V (@ Minimum gain), f1 = 44 MHz, f2 = 45 MHz, ZL = 250 Ω (@ single-ended output) Note 1 +2.5 dBm Notes 1. By measurement circuit 1 2. By measurement circuit 3 3. By measurement circuit 4 Data Sheet PU10171EJ03V0DS 6 µPC3221GV

50 Ω 50 Ω 200 Ω 1 kΩ VAGC VCC 1 Fµ 1 Fµ 200 Ω1 Fµ 1 Fµ 1 Fµ 1 Fµ AGC AMP. Video AMP. 50 Ω Signal Generator AGC Control Note Balun Transformer: TOKO 617DB-1010 B4F (Double balanced type) MEASUREMENT CIRCUIT 2 Note 200 Ω 1 kΩ VAGC VCC 1 Fµ 1 Fµ 200 Ω1 Fµ 1 Fµ 1 Fµ 1 Fµ AGC AMP. Video AMP. 50 Ω Signal Generator 50 Ω Spectrum Analyzer 50 Ω AGC Control Note Balun Transformer: TOKO 617DB-1010 B4F (Double balanced type) Data Sheet PU10171EJ03V0DS 7 µPC3221GV

50 Ω 50 Ω 200 Ω 1 kΩ VAGC VCC 1 Fµ 1 Fµ 200 Ω1 Fµ 1 Fµ 1 Fµ 1 Fµ AGC AMP. Video AMP. AGC Control Noise Source Note Balun Transformer: TOKO 617DB-1010 B4F (Double balanced type) MEASUREMENT CIRCUIT 4 Network Analyzer 50 Ω50 Ω 50 Ω50 Ω 1 kΩ VAGC VCC 1 Fµ 1 Fµ 1 Fµ 1 Fµ 1 Fµ 1 Fµ AGC AMP. Video AMP. AGC Control The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. Data Sheet PU10171EJ03V0DS 8 µPC3221GV

ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD (MEASUREMENT CIRCUIT 1) 200 Ω 200 Ω 1kΩ 1 F VCC µ 1 Fµ PC3221GVµ VAGC 1 Fµ 1 Fµ Note 1 Fµ 1 Fµ Note Balun Transformer Remarks 1. Back side: GND pattern 2. Solder plated on pattern 3. : Through hole Data Sheet PU10171EJ03V0DS 9 µPC3221GV

TYPICAL CHARACTERISTICS (TA = +25°C , unless otherwise specified) CIRCUIT CURRENT vs. SUPPLY VOLTAGECircuit Current ICC (mA) Supply Voltage VCC (V) 01 23 4 5 6 No input signal TA = –40˚C TA = +25˚C TA = +85˚C AGC PIN CURRENT vs. GAIN CONTROL VOLTAGE RANGE AGC Pin Current IAGC ( A) 100 Gain Control Voltage Range VAGC (V) No input signal TA = –40˚C 3.02.5 µ TA = +85˚C TA = +25˚C VOLTAGE GAIN vs. GAIN CONTROL VOLTAGE RANGE Voltage Gain (dB) Gain Control Voltage Range VAGC (V) VCC = 5.0 V f = 45 MHz TA = +85˚C TA = +25˚C TA = –40˚C VOLTAGE GAIN vs. GAIN CONTROL VOLTAGE RANGE Voltage Gain (dB) Gain Control Voltage Range VAGC (V) f = 45 MHz 3.02.5 VCC = 5.5 V VCC = 4.5 V VCC = 5.0 V AGC PIN CURRENT vs. GAIN CONTROL VOLTAGE RANGE AGC Pin Current IAGC ( A) 100 Gain Control Voltage Range VAGC (V) No input signal VCC = 4.5 V 3.02.5 µ VCC = 5.5 V VCC = 5.0 V –10 –20 –30 –40 –50 –60 VOLTAGE GAIN vs. FREQUENCY Voltage Gain (dB) 10 100 1 000 Frequency f (MHz) VCC = 5.5 V 5.0 V 4.5 V VAGC = 3.0 V (Pin = –60 dBm) VAGC = 1.6 V (Pin = –60 dBm) VAGC = 0.5 V (Pin = –30 dBm) Remark The graphs indicate nominal characteristics. Data Sheet PU10171EJ03V0DS 10 µPC3221GV

OUTPUT POWER vs. INPUT POWER Output Power Pout (50 Ω/250 Ω) (dB) –10 –15 –20 –25 –30 Input Power Pin (dBm) f = 45 MHz VAGC = 3.0 V VCC = 5.5 V 5.0 V 4.5 V OUTPUT POWER vs. INPUT POWER Output Power Pout (50 Ω/250 Ω) (dB) –10 –15 –20 –25 –30 Input Power Pin (dBm) f = 45 MHz VAGC = 1.6 V VCC = 5.5 V 5.0 V 4.5 V OUTPUT POWER vs. INPUT POWER Output Power Pout (50 Ω/250 Ω) (dB) –10 –15 –20 –25 –30 Input Power Pin (dBm) f = 45 MHz VAGC = 0.5 V 4.5 V VCC = 5.5 V 5.0 V OUTPUT POWER vs. INPUT POWER Output Power Pout (50 Ω/250 Ω) (dB) –10 –15 –20 –25 –30 Input Power Pin (dBm) VCC = 5.0 V f = 45 MHz VAGC = 1.6 V OUTPUT POWER vs. INPUT POWER Output Power Pout (50 Ω/250 Ω) (dB) –10 –15 –20 –25 –30 Input Power Pin (dBm) VCC = 5.0 V f = 45 MHz VAGC = 3.0 V TA = +85˚C +25˚C –40˚C +25˚C –40˚C TA = +85˚C OUTPUT POWER vs. INPUT POWER Output Power Pout (50 Ω/250 Ω) (dB) –10 –15 –20 –25 –30 Input Power Pin (dBm) VCC = 5.0 V f = 45 MHz VAGC = 0.5 V –40˚C TA = +85˚C +25˚C Remark The graphs indicate nominal characteristics. Data Sheet PU10171EJ03V0DS 11 µPC3221GV

NOISE FIGURE vs. GAIN CONTROL VOLTAGE RANGE Noise Figure NF (dB) Gain Control Voltage Range VAGC (V) VCC = 5.0 V f = 45 MHz NOISE FIGURE vs. GAIN CONTROL VOLTAGE RANGE Noise Figure NF (dB) Gain Control Voltage Range VAGC (V) f = 45 MHz VCC = 4.5 V 5.0 V 5.5 V NOISE FIGURE vs. GAIN REDUCTION Noise Figure NF (dB) Gain Reduction (dB) –40 –30 –20 0–10 VCC = 5.0 V 5.5 V VCC = 4.5 V NOISE FIGURE vs. GAIN REDUCTION Noise Figure NF (dB) Gain Reduction (dB) VCC = 5.0 V f = 45 MHz –40 –30 –20 0–10 TA = –40˚C +25˚C +85˚C TA = –40˚C +25˚C +85˚C –10 –20 –30 –40 –50 –60 –70 –80 Output Power Pout (50 Ω/250 Ω) (dB) Input Power Pin (dBm) OUTPUT POWER, IM3 vs. INPUT POWER VAGC = 3.0 V freq1 = 44 MHz freq2 = 45 MHz IM3 Pout 3rd Order Intermodulation Distortion IM3 (dBc) –80 VCC = 4.5 V 5.0 V 5.5 V VCC = 5.5 V 5.0 V 4.5 V –10 –20 –30 –40 –50 –60 –70 –80 Input Power Pin (dBm) OUTPUT POWER, IM3 vs. INPUT POWER VAGC = 1.6 V freq1 = 44 MHz freq2 = 45 MHz IM3 Pout –50 VCC = 4.5 V 5.0 V 5.5 V VCC = 4.5 V 5.0 V 5.5 V f = 45 MHz Output Power Pout (50 Ω/250 Ω) (dB) 3rd Order Intermodulation Distortion IM3 (dBc) Remark The graphs indicate nominal characteristics. Data Sheet PU10171EJ03V0DS 12 µPC3221GV

Input Power Pin (dBm) IM3 vs. INPUT POWER Vout = 0.7 Vp-p/tone freq1 = 44 MHz freq2 = 45 MHz 3rd Order Intermodulation Distortion IM3 (dBc) –60 VCC = 5.5 V 5.0 V 4.5 V –10 –20 –30 –40 –50 –60 –70 –80 –90 –30 –20 –10 0 10 20 Input Power Pin (dBm) OUTPUT POWER, IM3 vs. INPUT POWER VAGC = 0.5 V freq1 = 44 MHz freq2 = 45 MHz IM3 Pout –40 VCC = 4.5 V 5.0 V VCC = 5.5 V 5.0 V 4.5 V 5.5 V –10 –20 –30 –40 –50 –60 –70 –80 Input Power Pin (dBm) OUTPUT POWER, IM3 vs. INPUT POWER VCC = 5.0 V VAGC = 3.0 V freq1 = 44 MHz freq2 = 45 MHz IM3 Pout –80 TA = –40˚C TA = +85˚C +25˚C –40˚C +85˚C +25˚C –10 –20 –30 –40 –50 –60 –70 –80 Input Power Pin (dBm) OUTPUT POWER, IM3 vs. INPUT POWER VCC = 5.0 V VAGC = 1.6 V freq1 = 44 MHz freq2 = 45 MHz IM3 Pout –50 TA = +85˚C +25˚C +85˚C +25˚C –40˚C –40˚C –10 –20 –30 –40 –50 –60 –70 –80 –90 –30 –20 –10 0 10 20 Input Power Pin (dBm) OUTPUT POWER, IM3 vs. INPUT POWER VCC = 5.0 V VAGC = 0.5 V freq1 = 44 MHz freq2 = 45 MHz IM3 Pout –40 TA = +85˚C +25˚C +85˚C +25˚C –40˚C –40˚C Input Power Pin (dBm) IM3 vs. INPUT POWER VCC = 5.0 V Vout = 0.7 Vp-p/tone freq1 = 44 MHz freq2 = 45 MHz 3rd Order Intermodulation Distortion IM3 (dBc) –60 +25˚C –40˚C TA = +85˚C Output Power Pout (50 Ω/250 Ω) (dB) 3rd Order Intermodulation Distortion IM3 (dBc) Output Power Pout (50 Ω/250 Ω) (dB) 3rd Order Intermodulation Distortion IM3 (dBc) Output Power Pout (50 Ω/250 Ω) (dB) 3rd Order Intermodulation Distortion IM3 (dBc) Output Power Pout (50 Ω/250 Ω) (dB) 3rd Order Intermodulation Distortion IM3 (dBc) Remark The graphs indicate nominal characteristics. Data Sheet PU10171EJ03V0DS 13 µPC3221GV

S-PARAMETERS (TA = +25°C, VCC = VAGC = 5.0 V) S11−FREQUENCY 12 3 1 : 10 MHz 2.889 kΩ –1.059 kΩ 15.33 pF 2 : 45 MHz 864.1 Ω –1.402 kΩ 2.524 pF 3 : 100 MHz 235.0 Ω –806.9 Ω 1.973 pF S22−FREQUENCY 1 : 10 MHz 9.032 Ω 466.5 mΩ 7.335 nH 2 : 45 MHz 8.998 Ω 1.887 Ω 6.675 nH 3 : 100 MHz 7.266 Ω 6.750 Ω 10.74 nH Data Sheet PU10171EJ03V0DS 14 µPC3221GV

8-PIN PLASTIC SSOP (4.45 mm (175)) (UNIT: mm) 1.5±0.1 0.575 MAX. 0.10 M 1.8 MAX. 0.1±0.1 0.3+0.10 –0.05 detail of lead end 3˚+7˚ –3˚ 0.65 8 5 1 4 2.9±0.1 4.94±0.2 0.5±0.2 0.87±0.23.2±0.1 0.15+0.10 –0.05 0.15 Data Sheet PU10171EJ03V0DS 15 µPC3221GV

(1) Observe precautions for handling because of electro-static sensitive devices. (2) Form a ground pattern as widely as possible to mi nimize ground impedance (to pr event undesired oscillation). All the ground pins must be connected together with wide ground pattern to decrease impedance difference. (3) The bypass capacitor should be attached to V CC line. RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Soldering Conditions Condition Symbol Infrared Reflow Peak temperature (package surface temperature) : 260 °C or below Time at peak temperature : 10 seconds or less Time at temperature of 220°C or higher : 60 seconds or less Preheating time at 120 to 180°C : 120±30 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below IR260 VPS Peak temperature (package surface temperature) : 215° C or below Time at temperature of 200°C or higher : 25 to 40 seconds Preheating time at 120 to 150°C : 30 to 60 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below VP215 Wave Soldering Peak temperature (molten solder temperature) : 260° C or below Time at peak temperature : 10 seconds or less Preheating temperature (package surface temperature) : 120 °C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below WS260 Partial Heating Peak temperature (pin temperature) : 350°C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below HS350 Caution Do not use different soldering met hods together (except for partial heating). Data Sheet PU10171EJ03V0DS 16 µPC3221GV

M8E 00. 4 - 0110 The information in this document is current as of July, 2004. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use o f such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility o f customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications o f a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard" : Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special" : Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific" : Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC' s willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). Data Sheet PU10171EJ03V0DS 17 µPC3221GV

NEC Compound Semiconductor Devices Hong Kong Limited E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) Hong Kong Head Office Taipei Branch Office Korea Branch Office TEL: +852-3107-7303 TEL: +886-2-8712-0478 FAX: +852-3107-7309 FAX: +886-2-2545-3859 NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0406 NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579 For further information, please contact µPC3221GV

4590 Patrick Henry Drive

Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A -AZ Lead (Pb) < 1000 PPM Not Detected (*) Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.