UPC2711TB CEL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
PART NUMBER UPC2711TB UPC2712TB PACKAGE OUTLINE S06 S06 SYMBOLS PARAMETERS AND CONDITIONS UNITS MIN TYP MAX MIN TYP MAX ICC Circuit Current (no signal) mA 9 12 15 9 12 15 G P Power Gain, f = 1 GHz dB 11 13 16.5 18 20 23.5 fU Upper Limit Operating Frequency (The gain at fU is 3 dB down from the gain at 100 MHz) GHz 2.7 2.9 2.2 2.6 ∆G P Gain Flatness, f = 0.1 GHz to 2.5 GHz dB ±0.8 ±0.8 PO (SAT) Maximum Output Level, f = 1 GHz, PIN = 0 dBm dBm -2 +1 0 +3 NF Noise Figure, f = 1 GHz dB 5 6.5 4.5 6 RL IN Input Return Loss, f = 1 GHz dB 20 25 9 12 RL OUT Output Return Loss, f = 1 GHz dB 9 12 10 13 ISOL Isolation, f = 1 GHz dB 25 30 28 33 NEC's UPC2711TB and UPC2712TB are Silicon MMIC Wideband Amplifiers manufactured using NEC's 20 GHz fT NESAT TM III silicon bipolar process. These devices are de- signed for use as buffer amps in DBS tuners. The UPC2711/ 12TB are pin compatible and have comparable performance as the larger UPC2711/12T, so they are suitable for use as a replacement to help reduce system size. These IC's are housed in a 6 pin super minimold or SOT-363 package. NEC's stringent quality assurance and test procedure ensure the highest reliability and performance.
DESCRIPTION
ELECTRICAL CHARACTERISTICS (TA = +25 °C, VCC = 5.0 V, ZL = ZS = 50 W) UPC2711TB, UPC2712TB
5 V, SUPER MINIMOLD
SILICON MMIC WIDEBAND AMPLIFIER
FEATURES
- HIGH DENSITY SURFACE MOUNTING: 6 pin super minimold or SOT- 363 package
- SUPPLY VOLTAGE: VCC = 4.5 to 5.5 V
- WIDEBAND RESPONSE: UPC2711TB: fu = 2.9 GHz TYP UPC2712TB: fu = 2.6 GHz TYP
- POWER GAIN: UPC2711TB: G P = 13 dB TYP UPC2712TB: G P = 20 dB TYP GAIN vs. FREQUENCY Frequency, f (GHz) Gain, GP (dB) TYPICAL PERFORMANCE CURVES UPC2712TB UPC2711TB BIPOLAR ANALOG INTEGRATED CIRCUITS Date Published: June 22, 2005 The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
ABSOLUTE MAXIMUM RATINGS 1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS VCC Supply Voltage V 6 PIN Input Power dBm +10 PT Total Power Dissipation2 mW 200 TOP Operating Temperature °C -45 to +85 TSTG Storage Temperature °C -55 to +150 RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER UNITS MIN TYP MAX VCC Supply Voltage V 4.5 5.0 5.5 TOP Operating Temperature ˚C -40 +25 +85 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on double sided copper clad 50 x 50 x 1.6 mm epoxy glass PWB (TA = +85°C). Pin Pin Applied No. Name Voltage Description Internal Equivalent Circuit (V) 1 Input Signal input pin. An internal matching circuit, configured with resistors, enables 50 Ω connection over a wide bandwidth. A multi-feedback circuit is designed to cancel the deviations of h FE and resistance. This pin must be coupled to the signal source with a blocking capacitor. 4 Output Signal output pin. An internal matching circuit, configured with resistors, enables 50 Ω connection over a wide bandwidth. This pin must be coupled to the output load with a blocking capacitor. CC 4.5 to 5.5 Power supply pin. This pin should be externally equipped with a bypass capacitor to minimize ground impedance. 2 GND 0 Ground pin. This pin should be connected 3 to system ground with minimum inductance.
5 Ground pattern on the board should be
formed as wide as possible. All the ground pins must be connected together with wide ground pattern to minimize impedance difference. PIN DESCRIPTION UPC2711TB, UPC2712TB
TYPICAL PERFORMANCE CURVES (TA = 25°C) Gain, G S (dB) Frequency, f (GHz) Gain, G S (dB) Frequency, f (GHz) Isolation, ISOL, (dB) Frequency, f (GHz) Frequency, f (GHz) Input Return Loss, RL IN (dB) Output Return Loss, RL OUT (dB) UPC2711TB ISOLATION vs. FREQUENCY UPC2711TB INPUT RETURN LOSS AND OUTPUT RETURN LOSS vs. FREQUENCY UPC2711TB GAIN AND NOISE FIGURE vs. FREQUENCY AND VOLTAGE UPC2711TB GAIN vs. FREQUENCY AND TEMPERATURE UPC2711TB CURRENT vs. VOLTAGE Current, I CC (mA) UPC2711TB CURRENT vs. TEMPERATURE Current, I CC (mA) Temperature, TA (°C)Voltage, VCC (V) Noise Figure, NF (dB) 0 12 4 56 3 -40-60 -20 20 40 60 80 1000 VCC = 5.0 V 4-5 0.30.1 1.0 3.0 VCC = 5.5 V VCC = 5.5 V VCC = 5.0 V VCC = 4.5 V VCC = 4.5 V VCC = 5.0 V G S NF 0.30.1 1.0 3.0 TA = -40°C VCC = 5.0 V TA = +25°C TA = +25°C TA = +85°C TA = -40°C TA = +25°C -10 -20 -30 -40 -50 0.30.1 1.0 3.0 VCC = 5.0 V -10 -20 -30 -40 0.30.1 1.0 3.0 VCC = 5.0 V RL OUT RL IN UPC2711TB, UPC2712TB
Output Power, P OUT (dBm) Input Power, PIN (dBm) Output Power, P OUT (dBm) Frequency, f (GHz) Saturated Output Power, P SAT (dBm) Input Power, PIN (dBm) Output Power of Each Tone, POUT(each) (dBm) 3rd Order Intermodulation Distortion, IM 3 (dBc) UPC2711TB SATURATED OUTPUT POWER vs. FREQUENCY AND VOLTAGE UPC2711TB 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER AND VOLTAGE UPC2711TB OUTPUT POWER vs. INPUT POWER AND VOLTAGE UPC2711TB OUTPUT POWER vs. INPUT POWER AND FREQUENCY UPC2711TB OUTPUT POWER vs. INPUT POWER VOLTAGE Output Power, P OUT (dBm) UPC2711TB OUTPUT POWER vs. INPUT POWER AND TEMPERATURE Output Power, P OUT (dBm) Input Power, PIN (dBm)Input Power, PIN (dBm) -10 -15 -20 -35 -30 -25 -20 -15 -10 -5 0 5 VCC = 5.0 V f = 1.0 GHz 4.5 V 5.5 V -10 -15 -20 -35 -30 -25 -20 -15 -10 -5 0 5 VCC = 5.0 V f = 1.0 GHz +85°C -40°C -20°C TA = +25°C -10 -15 -20 -35 -30 -25 -20 -15 -10 -5 0 5 f = 2.0 GHz 5.5 V 4.5 V VCC = 5.0 V -10 -15 -20 -35 -30 -25 -20 -15 -10 -5 0 5 VCC = 5.0 V f = 0.5 GHz f = 1.0 GHz f = 2.0 GHz f = 2.9 GHz -10 -15 0.1 0.3 1.0 3.0 PIN = 0 dBm5.5 V 4.5 V VCC = 5.0 V -10 -20 -30 -40 -50 4.5 V 5.5 V VCC = 5.0 V f1 = 1.000 GHz f2 = 1.002 GHz TYPICAL PERFORMANCE CURVES (TA = 25°C) UPC2711TB, UPC2712TB
Gain, G S (dB) Frequency, f (GHz) Gain, G S (dB) Frequency, f (GHz) Isolation, ISOL, (dB) Frequency, f (GHz) Frequency, f (GHz) nput Return Loss, RL IN (dB) Output Return Loss, RL OUT (dB) UPC2712TB ISOLATION vs. FREQUENCY UPC2712TB INPUT RETURN LOSS AND OUTPUT RETURN LOSS vs. FREQUENCY UPC2712TB GAIN AND NOISE FIGURE vs. FREQUENCY AND VOLTAGE UPC2712TB GAIN vs. FREQUENCY AND TEMPERATURE UPC2712TB CURRENT vs. VOLTAGE Current, I CC (mA) UPC2712TB CURRENT vs. TEMPERATURE Current, I CC (mA) Temperature, TA (°C)Voltage, VCC (V) Noise Figure, NF (dB) 0 12 4 56 3 -40-60 -20 20 40 60 80 1000 VCC = 5.0 V 0.30.1 1.0 3.0 VCC = 5.0 V VCC = 5.5 V VCC = 5.5 V VCC = 4.5 V VCC = 5.0 V G S NF 0.30.1 1.0 3.0 -40°C +25°C VCC = 5.0 V TA = +85°C -10 -20 -30 -40 -50 0.30.1 1.0 3.0 VCC = 5.0 V -10 -20 -30 -40 0.30.1 1.0 3.0 VCC = 5.0 V RL OUT RL IN TYPICAL PERFORMANCE CURVES (TA = 25°C) UPC2711TB, UPC2712TB
Output Power, P OUT (dBm) Input Power, PIN (dBm) Output Power, P OUT (dBm) Frequency, f (GHz) Saturated Output Power, P SAT (dBm) Input Power, PIN (dBm) Output Power of Each Tone, POUT(each) (dBm) 3rd Order Intermodulation Distortion, IM 3 (dBc) UPC2712TB SATURATED OUTPUT POWER vs. FREQUENCY AND VOLTAGE UPC2712TB 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER AND VOLTAGE UPC2712TB OUTPUT POWER vs. INPUT POWER AND VOLTAGE UPC2712TB OUTPUT POWER vs. INPUT POWER AND FREQUENCY UPC2712TB OUTPUT POWER vs. INPUT POWER VOLTAGE Output Power, P OUT (dBm) UPC2712TB OUTPUT POWER vs. INPUT POWER AND TEMPERATURE Output Power, P OUT (dBm) Input Power, PIN (dBm)Input Power, PIN (dBm) -10 -15 -20 -25 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 VCC = 5.0 V f = 1.0 GHz 4.5 V 5.5 V -10 -15 -20 -25 -40 -35 -30 -25 -20 -15 -10 -5 0 5 VCC = 5.0 V f = 1.0 GHz +85°C -40°C TA = +25°C -10 -15 -20 -25 -40 -35 -30 -25 -20 -15 -10 -5 0 5 f = 2.0 GHz 5.5 V VCC = 5.0 V 4.5 V -10 -15 -20 -25 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 VCC = 5.0 V f = 0.5 GHz f = 1.0 GHz f = 2.0 GHz -10 0.1 0.3 1.0 3.0 PIN = 2 dBm5.5 V 4.5 V VCC = 5.0 V -10 -20 -30 -40 -50 4.5 V 5.5 V VCC = 5.0 V f1 = 1.000 GHz f2 = 1.002 GHz TYPICAL PERFORMANCE CURVES (TA = 25°C) UPC2711TB, UPC2712TB
FREQUENCY S 11 S21 S12 S22 K (MHz) MAG ANG MAG ANG MAG ANG MAG ANG UPC2711TB V CC = 5 V, ICC = 13.8 mA TYPICAL SCATTERING PARAMETERS (TA = 25°C) UPC2711TB, UPC2712TB
FREQUENCY S 11 S21 S12 S22 K (MHz) MAG ANG MAG ANG MAG ANG MAG ANG UPC2712TB V CC = 5 V, ICC = 13.9 mA TYPICAL SCATTERING PARAMETERS (TA = 25°C) UPC2711TB, UPC2712TB
OUTLINE DIMENSIONS (Units in mm) PACKAGE OUTLINE S06 PIN CONNECTIONS 1. Input 2. GND 3. GND Marking is an example of UPC2711TB 4. Output 5. GND 6. V CC TEST CIRCUIT PART NUMBER MARKING QTY UPC2711TB-E3 C1G 3K/reel UPC2712TB-E3 C1H 3K/reel ORDERING INFORMATION (Solder Contains Lead) Note: Embossed tape, 8 mm wide. Pins 1, 2, and 3 face perforated side of tape. +0.1 DOT ON BACK SIDE +0.1 -0.50 ~0.1 0.2 0.15 1 6 40.65 1.3 2.0±0.2 0.65 2.1±0.1 1.25±0.1 0.9 ± 0.1 0.7 C1G 6C1G (Top View) (Bottom View) IN OUT VCC 1000 pF 1000 pF1000 pF 2, 3, 5 50 Ω 50 Ω PART NUMBER MARKING QTY UPC2711TB-E3-A C1G 3K/reel UPC2712TB-E3-A C1H 3K/reel ORDERING INFORMATION (Pb-Free) Note: Embossed tape, 8 mm wide. Pins 1, 2, and 3 face perforated side of tape. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. A Business Partner of NEC Compound Semiconductor Devices, Ltd. UPC2711TB, UPC2712TB
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A -AZLead (Pb) < 1000 PPM Not Detected (*) Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.