UPB1507GV

UPB1507GV CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

NEC's 3.0 GHz DIVIDE BY 64/128/256 PRESCALER PART NUMBER UPB1506GV,UPB1507GV PACKAGE OUTLINE S08 SYMBOLS PARAMETERS AND CONDITIONS UNITS MIN TYP MAX ICC Circuit Current mA 12.5 19 26.5 fIN(U) Upper Limit Operating Frequency, PIN = -15 to +6 dBm GHz 3.0 fIN(L)1 Lower Limit Operating Frequency, PIN = -10 to +6 dBm GHz 0.5 fIN(L)2 Lower Limit Operating Frequency, PIN = -15 to +6 dBm GHz 1.0 PIN1 Input Power, fIN = 1.0 to 3.0 GHz dBm -15 +6 PIN2 Input Power, fIN = 0.5 to 1.0 GHz dBm -10 +6 VOUT Output Voltage, CL = 0.8 pF V P-P 1.2 1.6 VIN(H) Division Ratio Control Input High V V CC VIN(L) Division Ratio Control Input Low V OPEN or GND

FEATURES

• HIGH FREQUENCY OPERATION TO 3 GHz
• SELECTABLE DIVIDE RATIO: ÷64, ÷128, ÷256
• LOW CURRENT CONSUMPTION: 19 mA at 5 V
• SMALL PACKAGE: 8 pin SSOP
• AVAILABLE IN TAPE AND REEL TEST CIRCUIT UPB1506GV UPB1507GV ELECTRICAL CHARACTERISTICS (TA = -40 to +85°C, VCC = 4.5 to 5.5 V, Zs = 50Ω) C C C C = 1000 pF 10,000 pF OPEN UPB1507GV IN VCC VCC VOUT fIN SW1 OUT NC SW2 GND IN PLEASE NOTE: The followng part number from this datasheet is Not Recommended for New Designs: UPB1506GV Please contact your local sales office for details:

DESCRIPTION

NEC's UPB1506GV and UPB1507GV are Silicon MMIC digital prescalers manufactured with the NESAT™ IV silicon bipolar process. They feature high frequency response to 3 GHz, selectable divide-by-64, 128, or 256 modes, and operate on a 5 volt supply while drawing only 19 mA. The devices are housed in a small 8 pin SSOP package that contributes to system miniaturization. These devices are designed for use in a PLL synthesizer for DBS and CATV settop and WLAN applications. California Eastern Laboratories

Pin No. Pin Applied Pin Description Name Voltage Voltage UPB1506GV UPB1507GV (V) (V) 21 IN – 2.9 Signal input pin. This pin should be coupled to the source with a capacitor (eg 1000 pF). 38 IN – 2.9 Signal input bypass pin. This pin must be equipped with a bypass capacitor (eg 1000 pF) to ground. 45 GND 0 – Ground pin. Ground pattern on the board should be formed as wide as possible to minimize ground impedance. 13 SW1 H/L – Divided ratio input pin. The ratio can be controlled by the following input data to these pins.

66 SW2

These pins should be equipped with a bypass capacitor (e.g. 1000 pF) to ground. 82 V CC 4.5 to 5.5 – Power supply pin. This pin must be equipped with bypass capacitor (eg 1000 pF) to ground. 74 OUT – 2.6 to 4.7 Divided frequency output pin. This pin is designed as an emitter follower output. This pin can be connected to CMOS input due to 1.2 Vp-p MIN output. 57 NC – – No connection. This pin must be opened. SW2 HL H ÷64 ÷128 SW1 L ÷128 ÷256 ABSOLUTE MAXIMUM RATINGS 1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS VCC Supply Voltage V -0.5 to 6.0 VIN Input Voltage V -0.5 to Vcc + 0.5 PIN Input Power dBm +10 PD Power Dissipation2 mW 250 TOP Operating Temperature °C -45 to +85 TSTG Storage Temperature °C -55 to +150 UPB1506GV, UPB1507GV SYMBOL PARAMETER UNITS MIN TYP MAX VCC Supply Voltage V 4.5 5.0 5.5 TOP Operating Temperature °C -40 +25 +85 RECOMMENDED OPERATING CONDITIONS Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on a double-sided copper clad 50x50x1.6 mm epoxy glass PWB (T A = +85˚C). PIN DESCRIPTIONS

TYPICAL PERFORMANCE CURVES (TA = +25°C unless otherwise noted) Supply Voltage, VCC (V) Circuit Current, I CC (mA) CURRENT vs. VOLTAGE and TEMPERATURE No Signals TA = +85°C TA = +25°C TA = -40°C 63210 Guaranteed Operating Window TA = +25°C +20 +10 -10 -20 -30 -40 -50 -60 40001000100 VCC = 4.5 to 5.5 V VCC = 4.5 to 5.5 V Guaranteed Operating Window +20 +10 -10 -20 -30 -40 -50 -60 40001000100 TA = +25°C TA = +85°C TA = -40°C VCC = 4.5 to 5.5 V TA = +25°C TA = -40°C TA = +85°C TA = +25°C PIN = -10 dBm 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 40001000100 VCC = 5.0 V VCC = 4.5 V VCC = 5.5 V TA = -40°C PIN = -10 dBm 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 40001000100 VCC = 5.0 V VCC = 4.5 V VCC = 5.5 V TA = +85°C PIN = -10 dBm 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 40001000100 VCC = 5.0 V VCC = 4.5 V VCC = 5.5 V Input Frequency, fin (MHz) Output Voltage, V OUT PP OUTPUT VOLTAGE vs. INPUT FREQUENCY and VOLTAGE Input Frequency, fin (MHz) Output Voltage, V OUT PP OUTPUT VOLTAGE vs. INPUT FREQUENCY and VOLTAGE Input Frequency, fin (MHz) Output Voltage, V OUT PP OUTPUT VOLTAGE vs. INPUT FREQUENCY and VOLTAGE Input Frequency, fin (MHz) Input Power, P IN (dBm) INPUT POWER vs. INPUT FREQUENCY and TEMPERATURE Input Frequency, fin (MHz) Input Power, P IN (dBm) INPUT POWER vs. INPUT FREQUENCY and VOLTAGE UPB1506GV, UPB1507GV

TYPICAL PERFORMANCE CURVES (TA = +25°C unless otherwise noted) Guaranteed Operating Window TA = +25°C +20 +10 -10 -20 -30 -40 -50 -60 40001000100 VCC = 4.5 to 5.5 V VCC = 4.5 to 5.5 V Guaranteed Operating Window +20 +10 -10 -20 -30 -40 -50 -60 40001000100 TA = +25°C TA = +85°C TA = -40°C VCC = 4.5 to 5.5 V TA = +25°C TA = -40°C TA = +85°C TA = +25°C PIN = -10 dBm 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 40001000100 VCC = 5.0 V VCC = 4.5 V VCC = 5.5 V TA = -40°C PIN = -10 dBm 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 40001000100 VCC = 5.0 V VCC = 4.5 V VCC = 5.5 V TA = +85°C PIN = -10 dBm 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 40001000100 VCC = 5.0 V VCC = 4.5 V VCC = 5.5 V Guaranteed Operating Window TA = +25°C +20 +10 -10 -20 -30 -40 -50 -60 40001000100 VCC = 4.5 to 5.5 V VCC = 4.5 to 5.5 V Input Frequency, fin (MHz) Input Frequency, fin (MHz) OUTPUT VOLTAGE vs. INPUT FREQUENCY and VOLTAGE Input Frequency, fin (MHz) OUTPUT VOLTAGE vs. INPUT FREQUENCY and VOLTAGE Input Frequency, fin (MHz) Input Power, P IN (dBm) INPUT POWER vs. INPUT FREQUENCY and TEMPERATURE Input Frequency, fin (MHz) Input Power, P IN (dBm) INPUT POWER vs. INPUT FREQUENCY and VOLTAGE Output Voltage, V OUT PP Output Voltage, V OUT PP OUTPUT VOLTAGE vs. INPUT FREQUENCY and VOLTAGE Output Voltage, V OUT PP Input Frequency, fin (MHz) Input Power, P IN (dBm) INPUT POWER vs. INPUT FREQUENCY and VOLTAGE UPB1506GV, UPB1507GV

TYPICAL PERFORMANCE CURVES (TA = +25°C unless otherwise noted) Guaranteed Operating Window +20 +10 -10 -20 -30 -40 -50 -60 40001000100 TA = +85°C TA = -40°C VCC = 4.5 to 5.5 V TA = +25°C TA = -40°C TA = +85°C TA = +25°C TA = +25°C PIN = -10 dBm 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 40001000100 VCC = 5.0 V VCC = 4.5 V VCC = 5.5 V TA = -40°C PIN = -10 dBm 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 40001000100 VCC = 5.0 V VCC = 4.5 V VCC = 5.5 V TA = +85°C PIN = -10 dBm 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 40001000100 VCC = 5.0 V VCC = 4.5 V VCC = 5.5 V Input Frequency, fin (MHz) Input Power, P IN (dBm) INPUT POWER vs. INPUT FREQUENCY and VOLTAGE Input Frequency, fin (MHz) OUTPUT VOLTAGE vs. INPUT FREQUENCY and VOLTAGE Output Voltage, V OUT PP Input Frequency, fin (MHz) OUTPUT VOLTAGE vs. INPUT FREQUENCY and VOLTAGE Output Voltage, V OUT PP Input Frequency, fin (MHz) OUTPUT VOLTAGE vs. INPUT FREQUENCY and VOLTAGE Output Voltage, V OUT PP UPB1506GV, UPB1507GV

UPB1506GV, UPB1507GV FREQUENCY S 11 GHz MAG ANG 0.5 0.868 -26.6 0.6 0.828 -32.6 0.7 0.794 -37.4 0.8 0.761 -41.9 0.9 0.721 -46.5 1.0 0.706 -49.3 1.1 0.662 -54.0 1.2 0.629 -57.2 1.3 0.595 60.2 1.4 0.554 -62.9 1.5 0.516 -64.8 1.6 0.440 -61.9 1.7 0.428 51.0 1.8 0.543 -61.5 1.9 0.555 -68.4 2.0 0.560 -74.7 2.1 0.558 - 79.5 2.2 0.564 -84.9 2.3 0.570 -90.9 2.4 0.574 -98.3 2.5 0.574 -107.9 2.6 0.564 - 118.3 2.7 0.530 -131.4 2.8 0.476 - 144.6 2.9 0.411 - 159.1 3.0 0.331 - 175.8 TYPICAL SCATTERING PARAMETERS (TA = 25°C) S11 Z REF 1.0 Units 200.0 mUnits/ 33.881 Ω -52.875 Ω hp C D MARKER 3

2.0 GHZ

: 0.5 GHz : 1.0 GHz : 2.0 GHz : 3.0 GHz S11 vs. INPUT FREQUENCY VCC = 5.0 V START 0.500000000 GHz STOP 3.000000000 GHz FREQUENCY S 22 MHz MAG ANG 45.0 0.542 -1.4 50.0 0.602 -0.3 55.0 0.616 0.0 60.0 0.605 1.1 65.0 0.609 0.7 70.0 0.616 0.3 75.0 0.620 0.1 80.0 0.622 0.0 85.0 0.619 0.6 90.0 0.610 0.9 95.0 0.626 -0.7 100.0 0.623 -1.7 S22 Z REF 1.0 Units 200.0 mUnits/ 171.22 Ω -04.438 Ω hp C D MARKER 1

45.0 MHZ

: 45 MHz : 100 MHz S22 vs. OUTPUT FREQUENCY Divide by 64 mode, VCC = 5.0 V START 0.045000000 GHz STOP 0.100000000 GHz UPB1506GV UPB1506GV

UPB1506GV, UPB1507GV TYPICAL SCATTERING PARAMETERS (TA = 25°C) FREQUENCY S 22 MHz MAG ANG 45.0 0.590 -0.4 50.0 0.604 -1.0 55.0 0.610 -1.1 60.0 0.607 -0.8 65.0 0.548 -5.9 70.0 0.630 -0.0 75.0 0.615 -1.0 80.0 0.618 -1.4 85.0 0.617 -1.2 90.0 0.616 -2.2 95.0 0.623 -2.4 100.0 0.624 -2.3 S22 Z REF 1.0 Units 200.0 mUnits/ 192.34 Ω 03.109 Ω hp C D MARKER 1 : 45 MHz : 100 MHz S22 vs. OUTPUT FREQUENCY Divide by 128 mode, VCC = 5.0 V START 0.045000000 GHz STOP 0.100000000 GHz FREQUENCY S 22 MHz MAG ANG 45.0 0.601 -0.9 50.0 0.609 -1.6 55.0 0.611 -1.5 60.0 0.620 -1.4 65.0 0.607 -2.1 70.0 0.615 -1.9 75.0 0.613 -3.2 80.0 0.611 -2.8 85.0 0.607 -2.5 90.0 0.605 -2.4 95.0 0.610 -3.0 100.0 0.608 -2.8 S22 Z REF 1.0 Units 200.0 mUnits/ 199.25 Ω -05.992 Ω hp C D MARKER 1

45.0 GHZ

: 45 MHz : 100 MHz S22 vs. OUTPUT FREQUENCY Divide by 256 mode, VCC = 5.0 V START 0.045000000 GHz STOP 0.100000000 GHz UPB1506GV UPB1506GV

UPB1506GV, UPB1507GV FREQUENCY S 11 GHz MAG ANG 0.5 0.857 -27.5 0.6 0.849 -32.0 0.7 0.800 -38.9 0.8 0.764 -43.8 0.9 0.725 -49.0 1.0 0.665 -50.9 1.1 0.619 -55.3 1.2 0.573 -59.3 1.3 0.531 -61.3 1.4 0.484 -62.8 1.5 0.439 -63.0 1.6 0.377 -59.1 1.7 0.340 -54.1 1.8 0.377 -54.7 1.9 0.441 -59.5 2.0 0.464 -67.2 2.1 0.443 -67.4 2.2 0.466 -74.5 2.3 0.465 -81.3 2.4 0.454 -89.4 2.5 0.433 -99.2 2.6 0.383 -109.6 2.7 0.350 -114.0 2.8 0.332 -124.2 2.9 0.271 -141.2 3.0 0.185 -163.6 TYPICAL SCATTERING PARAMETERS (TA = 25°C) S11 Z REF 1.0 Units 200.0 mUnits/ 38.111 Ω 0.9707 Ω hp C D MARKER 4

3.0 GHZ

: 0.5 GHz : 1.0 GHz : 2.0 GHz : 3.0 GHz S11 vs. INPUT FREQUENCY VCC = 5.0 V START 0.500000000 GHz STOP 3.000000000 GHz FREQUENCY S 22 MHz MAG ANG 45.0 0.580 3.4 50.0 0.572 2.5 55.0 0.574 3.0 60.0 0.574 2.7 65.0 0.584 3.0 70.0 0.587 2.6 75.0 0.592 2.4 80.0 0.587 2.6 85.0 0.589 2.9 90.0 0.591 2.9 95.0 0.573 1.7 100.0 0.604 2.9 S22 Z REF 1.0 Units 200.0 mUnits/ 185.13 Ω 17.789 Ω hp C D MARKER 1 : 45 MHz : 100 MHz S22 vs. OUTPUT FREQUENCY Divide by 64 mode, VCC = 5.0 V START 0.045000000 GHz STOP 0.100000000 GHz UPB1507GV UPB1507GV

UPB1506GV, UPB1507GV TYPICAL SCATTERING PARAMETERS (TA = 25°C) FREQUENCY S 22 MHz MAG ANG 45.0 0.578 3.2 50.0 0.571 2.8 55.0 0.572 3.3 60.0 0.576 3.0 65.0 0.584 3.1 70.0 0.587 2.8 75.0 0.589 2.4 80.0 0.589 2.8 85.0 0.588 3.0 90.0 0.593 2.8 95.0 0.598 3.0 100.0 0.602 2.9 S22 Z REF 1.0 Units 200.0 mUnits/ 185.02 Ω 18.953 Ω hp C D MARKER 1 : 45 MHz : 100 MHz S22 vs. OUTPUT FREQUENCY Divide by 128 mode, VCC = 5.0 V START 0.045000000 GHz STOP 0.100000000 GHz FREQUENCY S 22 MHz MAG ANG 45.0 0.580 3.0 50.0 0.572 2.8 55.0 0.571 2.9 60.0 0.576 2.9 65.0 0.585 3.2 70.0 0.590 2.8 75.0 0.589 2.5 80.0 0.590 2.6 85.0 0.588 2.9 90.0 0.597 2.9 95.0 0.600 3.1 100.0 0.601 3.1 S22 Z REF 1.0 Units 200.0 mUnits/ 186.76 Ω 17.82 Ω hp C D MARKER 1 : 45 MHz : 100 MHz S22 vs. OUTPUT FREQUENCY Divide by 256 mode, VCC = 5.0 V START 0.045000000 GHz STOP 0.100000000 GHz UPB1507GV UPB1507GV

SYSTEM APPLICATION EXAMPLE UPB1506GV, UPB1507GV MIX1stIF input from DBS converter To 2150 MHz OSC To 2650 MHz loop filter High Division prescaler UPB1506GV or UPB1507GV CMOS PLL synthesizer LPF BPF SAW AGC amp. FM demo. RF unit block of Analog DBS tuners RF unit block of Analog CATV converter To 800 MHz OSC To 2000 MHz loop filter High Division prescaler UPB1506GV or UPB1507GV CMOS PLL synthesizer LPF BPF To 1300 MHz downconverterupconverter BPF

Pin No. UPB1506GV UPB1507GV

1 SW1 IN

2 IN Vcc

3 IN SW1

4 GND OUT

5 OPEN GND

6 SW2 SW2

7 OUT OPEN

8 Vcc IN

PART NUMBER QUANTITY MARKING UPB1506GV-E1 1000/Reel 1506 UPB1507GV-E1 1000/Reel 1507 UPB1506GV, UPB1507GV INTERNAL BLOCK DIAGRAM OUTLINE DIMENSIONS (Units in mm) PACKAGE OUTLINE S08

ORDERING INFORMATION

Note: 1. Embossed tape 8 mm wide. Pin 1 is in the tape pull-out direction. 1509 PIN CONNECTIONS SW1 SW2 OUT D CLK Q IN IN Q D CLK Q Q D CLK AMP Q Q D CLK Q Q D CLK Q Q D CLK Q Q D CLK CLK Q Q D CLK Q Q 8 7 6

3.0 MAX

N 1.5±0.1

1.8 MAX

0.1 ± 0.1 0.3+0.10 -0.05

0.575 MAX

0.15+0.10 -0.05 4.94 ± 0.2 3.2±0.1 0.87±0.2 0.5 ± 0.2 0.65 3 +7˚ -3˚ Detail of Lead End A Business Partner of NEC Compound Semiconductor Devices, Ltd. 7/22/2004 Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.