DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

UNISONIC TECHNOLOGIES CO., LTD UM601/A Preliminary LINEAR INTEGRATED CIRCUIT www.unisonic.com.tw 1 of 5 Copyright © 2013 Unisonic Technologies Co., Ltd QW-R121-001.C VOLTAGE AND CURRENT CONTROLLER  DESCRIPTION The UTC UM601/A integrated circuit incorporates a high stability series band gap voltage reference, tw o ORed operational amplifiers and a current source. This IC compares the DC voltage an d the current level at the output of a switching power supply to an in ternal reference. It provides a feedback through an optocoupler to the PWM controller IC in the primary side. The controlled current generator can be used to modify the level of current limitation by offsetting t he information coming from the current sensing resistor. It can be used in voltage supervi sors, every types of application requiring a precision voltage regula tion and current limitation, over voltage protection, battery charger wi th a constant voltage and a limited output current.  FEATURES * 1.24V Series Voltage Reference with 10mA Output Current and 1% Precision (UM601A) * Two Operational Amplifiers with ORed Output and 1MHz Gain Bandwidth Product * Built-In Current Generator with Enable / Disable Function * 4.5 ~ 32V Supply Voltage Range  ORDERING INFORMATION Ordering Number Package Packing Lead Free Halogen Free UM601L-D08-T UM601G-D08-T DIP-8 Tube UM601L-S08-R UM601G-S08-R SOP-8 Tape Reel UM601AL-D08-T UM601AG-D08-T DIP-8 Tube UM601AL-S08-R UM601AG-S08-R SOP-8 Tape Reel

UM601/A Preliminary LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 2 of 5 www.unisonic.com.tw Q W - R 1 2 1 - 0 0 1 . C  PIN CONFIGURATION VREF GND 4 3CRREF 2CSEN 1VREF 8 VCC

7 VRIN

5 CRIN

 PIN DESCRIPTION PIN NAME TYPE FUNCTION 1. V REF OUTPUT Voltage Reference Output 1. 24V, 10mA max. Do not short circuit 2. C SEN INPUT Current source enable input. This current source can be used to offset the voltage measurement on the sense resist or and therefore to modify the charge current. The current source is enabled w hen the input volage on pin 2 is lower than 0.8V 3. C RREF INPUT Current Limitation Reference Input 4. GND INPUT Ground 5. C RIN INPUT Current Limitation Loop Input, connected to the sense resistor 6. OUTPUT OUTPUT Output pin common to the voltage regulat ion and current limitation loops. This output can drive the primary side (LED) of an optocoupler 7. V RIN INPUT Voltage Regulation Loop Input 8. V CC INPUT Power Supply Input (4.5 ~ 32VDC)

UM601/A Preliminary LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 3 of 5 www.unisonic.com.tw Q W - R 1 2 1 - 0 0 1 . C  BLOCK DIAGRAM

UM601/A Preliminary LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 4 of 5 www.unisonic.com.tw Q W - R 1 2 1 - 0 0 1 . C  ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT DC Supply Voltage V CC 36 V Output Current I OUT 20 mA Power Dissipation P D 200 mW Input Voltage V IN -0.3 ~ V CC-1.5 V Input Current I IN ±1 mA Junction Temperature T J 150 °C Storage Temperature T STG -40 ~ +125 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.  OPERATING CONDITIONS PARAMETER SYMBOL RATINGS UNIT Supply Voltage V CC 4.5 ~ 32 V Ambient Operating Temperature T OPR -20 ~ +80 °C  THERMAL DATA PARAMETER SYMBOL RATINGS UNIT Junction to Ambient θJA 130 ~ 200 °C/W  ELECTRICAL CHARACTERISTICS (VCC=15V, TA=25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Total Supply Current I CC V CC=15V 2 mA Input Voltage V I 0 VCC-1.5 V Input Offset Voltage V IO TA=25°C -5 1 5 mV TMIN.<TAMB.<TMAX. -7 7 mV Input Bias Current I IB VIN=1.2V on pin 7 and VIN=0V on pin5 25°C -700 -300 0 nA TMIN.<TAMB.<TMAX. -1000 0 nA Output Sink Current I SINK V OL=2.5 V 25°C 15 mA TMIN.<TAMB.<TMAX. 8 mA Large Signal Voltage Gain A VO R L=2kΩ, TMIN.<TAMB.<TMAX. 15 V/mV Supply Voltage Rejection Ratio SVR T MIN.<TAMB.<TMAX. 65 90 dB Common Mode Rejection Ratio CMR T MIN.<TAMB.<TMAX. 80 dB Gain Bandwidth Product GBP VCC=15V, F=100kHz, VIN=10mV, RL=2kΩ, CL=100pF 1 MH Z Output Leakage Current I OH TA=25°C 2 μA TMIN.<TAMB.<TMAX. 7 μA VOLTAGE REFERENCE Temperature Stability K VT T MIN.<TAMB.<TMAX. 30 100 ppm/°C Load Regulation Reglo 1mA <I OUT<10mA 5 15 mV Line Regulation Regli 5V<V IN<32V 3.5 10 mV CURRENT GENERATOR Current Source I O 1.4 mA Temperature Stability K CGT T MIN.<TAMB.<TMAX. 500 ppm/°C Line Regulation CgliR 4.5V<V CC<32V 0.003 0.030 mV Voltage at the enable pin to have Voltage at the enable pin to have IO=0mA VCSDIS T MIN.<TAMB.<TMAX. 2 V Input Current on the Csen pin I CSEN T MIN.<TAMB.<TMAX. 30 μA Leakage Current I CSLEAK VCS=2V, TMIN.<TAMB.<TMAX. 0.5 2 μA

UM601/A Preliminary LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 5 of 5 www.unisonic.com.tw Q W - R 1 2 1 - 0 0 1 . C UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.