TSV TRACOPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

◆ SMD package (SOIC-12) ◆ Isolated single and dual output models ◆ I/O isolation 3‘000 VDC ◆ High efficiency up to 81 % ◆ Extended temperature range –40°C to +85°C ◆ High accuracy of pin co-planarity ◆ Available in tape and reel package ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The TSV series are miniature, 1W DC/DC-converters with high isolation in a SMD package. The devices can be soldered without any problems in a high temperature lead free solder process. With the small footprint, these converters are the ideal solution for board level power distribution, mainly for applications in the industrial- and telecom field. Ordercode Input voltage Output voltage Output current max. Efficiency typ. TSV 0505S 5 VDC 200 mA 71 % TSV 0512S 12 VDC 80 mA 78 % TSV 0515S 5 VDC ±10 % 15 VDC 65 mA 78 % TSV 0505D (Nominal 5 VDC) ±5 VDC ±100 mA 72 % TSV 0512D ±12 VDC ±40 mA 78 % TSV 0515D ±15 VDC ±30 mA 79 % TSV 1205S 5 VDC 200 mA 71 % TSV 1212S 12 VDC 80 mA 79 % TSV 1215S 12 VDC ±10 % 15 VDC 65 mA 80 % TSV 1205D (Nominal 12 VDC) ±5 VDC ±100 mA 74 % TSV 1212D ±12 VDC ±40 mA 80 % TSV 1215D ±15 VDC ±30 mA 81 % TSV 2405S 5 VDC 200 mA 71 % TSV 2412S 12 VDC 80 mA 78 % TSV 2415S 24 VDC ±10 % 15 VDC 65 mA 79 % TSV 2405D (Nominal 24 VDC) ±5 VDC ±100 mA 72 % TSV 2412D ±12 VDC ±40 mA 79 % TSV 2415D ±15 VDC ±30 mA 80 % Models not recommended for new design in

http://www.tracopower.com Page 2 of 3 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. DC/DC Converters TSV Series 1 Watt Input Specifications Input current no load / full load 5 Vin models: 30 mA / 260 mA typ. 12 Vin models: 12 mA / 1 10 mA typ. 24 Vin models: 7 mA / 55 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. Reflected input ripple current* can be reduced by ext. 1–3.3 µF polyester film capacitor Input filter internal capacitor Output Specifications Voltage set accuracy ±4 % max. Voltage balance (dual output models, balanced load) 1 % max. Regulation – Input variation 1.2 % / 1% change Vin – Load variation 20 – 100 % 10 % max. Ripple and noise (20 MHz Bandwidth) 75 mV pk-pk max. Temperature coefficient ±0.02 %/K Short circuit protection limited 0.5 sec. max. Capacitive load 5 VDC single output models: 33 µF max. 5 VDC dual output model: 10 µF max. 12/15 VDC single output models: 4.7 µF max. 12/15 VDC dual output models: 2.2 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C (no derating) – Case temperature +105°C max. – Storage –40°C to +105°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTTF (MIL-HDBK-217F, @ +25°C, ground benign) >2’000’000 h Isolation voltage (Input/Output, 60 sec.) 3‘000 VDC Isolation capacitance (Input/Output) 60 pF typ. Isolation resistance (Input/Output) >10‘000 M Ohm (500VDC) Switching frequency 100 kHz typ. (frequency modulation) Frequency change over line and load ±30 % max. Physical Specifications Casing material non conductive FR4 (UL 94V-0 rated) Package weight 2.2 g (0.07 oz) Reflow soldering profile peak temp. 245°C (10 sec. max.) 217°C for 90 sec. max. Convection reflow solder process is recommended Packaging information www.tracopower.com/overview/tsv

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com Rev. August 3, 2022 7.0 (0.27) 9.2 (0.36) 11.2 (0.44) ± 4° Seating Plane S 6.5 4.7 (0.18) 6.7 (0.26) 0.25 (0.01) 15.24 (0.6) 0.6 (0.024) 8.0 (0.31)

0.2 M S

P

10 Pins

0.25 (0.01) 2.54 2.542.54 5.08 1.3 (0.05) (0.256) Top view 12 35 6 78101112 DC/DC Converters TSV Series 1 Watt Outline Dimensions Pin Single Dual 1 –Vin (GND) –Vin (GND) 2 +Vin (Vcc) +Vin (Vcc) 3 ntc ntc 5 –Vout Common 6 ntc –Vout 7 ntc ntc 8 +Vout +Vout 10 ntc ntc 11 ntc ntc 12 ntc ntc Pin-Out Derating all Models Ambient Temperature [˚C] -20 -40 -30 -10 01 03 020 100 40 50 60 70 80 11090 100 +85˚C +105˚C -5.0% /˚C Output Power [%]70 100 Output Power [%]70 Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.02 ±0.002) Pin pitch tolerances: ±0.13 (±0.005) Case tolerances: ±0.25 (±0.01) 1.0 (0.04) 1.8 12.7 (0.50) (0.01) 2.54 2.54 2.54 5.08 Solder pad (ntc = not to connect)