TSR2 TRACOPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Non-Isolated DC/DC Converter (POL) TSR 2 Series, 2 A
- Ultra compact SIP package 0.55 x 0.30 x 0.40 inch
- Up to 96% efficiency – No heat-sink required
- Pin compatible with LMxx linear regulators
- Built in filter capacitors
- Operating temperature range -40°C to +85°C
- Excellent line / load regulation
- Short circuit protection
- 3-year product warranty The new TSR 2 series step-down switching regulators are drop-in replacement for inefficient LMxx linear regulators. A high efficiency up to 96% allows full load operation up to +67°C ambient temperature without the need of any heat-sink or forced cooling. The TSR 2 switching regulators provide other sig- nificant features over linear regulators, i.e. better output accuracy (±2%), lower standby current of 2 mA and no requirement of external capacitors. The high efficiency and low standby power consumption makes these regulators an ideal solution for many battery powered applications. Models Order Code Output Current Input Voltage Output Voltage Efficiency max. Range nom. typ. TSR 2-0512 2'000 mA 3 - 5.5 VDC (5 VDC nom.)
1.2 VDC 90 %
TSR 2-0515 1.5 VDC 91 % TSR 2-0518 1.8 VDC 92 % TSR 2-0525 3.8 - 5.5 VDC (5 VDC nom.) 2.5 VDC 95 % TSR 2-2412 4.6 - 36 VDC (12 VDC nom.)
1.2 VDC 84 %
TSR 2-2415 1.5 VDC 86 % TSR 2-2418 1.8 VDC 87 % TSR 2-2425 2.5 VDC 89 % TSR 2-2433 4.75 - 36 VDC (12 VDC nom.) 3.3 VDC 91 % TSR 2-2450 6.5 - 36 VDC (12 VDC nom.) 5 VDC 94 % TSR 2-2465 9 - 36 VDC (12 VDC nom.) 6.5 VDC 94 % TSR 2-2490 12 - 36 VDC (24 VDC nom.) 9 VDC 95 % TSR 2-24120 15 - 36 VDC (24 VDC nom.) 12 VDC 95 % TSR 2-24150 18 - 36 VDC (24 VDC nom.) 15 VDC 96 % Note - If the input is switched electromechanically, a 22 µF / 50 V electrolytic capacitor at the input is recommended (12 & 24 Vin models only) www.tracopower.com November 30, 2022 Page 1 / 4
Input Current - At no load 5 Vin models: 1 mA typ. 12 Vin models: 1 mA typ. 24 Vin models: 1 mA typ. Recommended Input Fuse 5 Vin models: 2'000 mA (slow blow)
24 Vin models: 3'150 mA (slow blow)
- 12 Vin input 1.2 Vout models: 1'600 mA (slow blow)
1.5 Vout models: 1'600 mA (slow blow)
1.8 Vout models: 1'600 mA (slow blow)
2.5 Vout models: 2'500 mA (slow blow)
3.3 Vout models: 2'500 mA (slow blow)
5 Vout models: 2'500 mA (slow blow)
6.5 Vout models: 2'500 mA (slow blow)
(The need of an external fuse has to be assessed in the final application.) Input Filter Internal Capacitor Input Specifications Voltage Set Accuracy ±2% max. Regulation - Input Variation (Vmin - Vmax) 0.5% max. - Load Variation (0 - 100%) 1% max. Ripple and Noise (20 MHz Bandwidth) 5 Vin models: 50 mVp-p typ. 12 Vin models: 50 mVp-p typ. 24 Vin models: 75 mVp-p typ. Capacitive Load 1.2 Vout models: 2'500 µF max. 1.5 Vout models: 2'000 µF max. 1.8 Vout models: 1'600 µF max. 2.5 Vout models: 1'200 µF max. 3.3 Vout models: 900 µF max. 5 Vout models: 600 µF max. 6.5 Vout models: 470 µF max. 9 Vout models: 330 µF max. 12 Vout models: 270 µF max. 15 Vout models: 200 µF max. Minimum Load Not required Temperature Coefficient ±0.02 %/K max. Start-up Time 5 ms typ. Short Circuit Protection Continuous, Automatic recovery Overload Protection Foldback Mode Output Current Limitation 400% typ. of Iout max. (5 Vin models) 180% typ. (other input models) Transient Response - Peak Variation 300 mV typ. / 500 mV max. (50% Load Step) (24 Vin models) 150 mV typ. / 250 mV max. (50% Load Step) (other models) - Response Time 150 µs typ. / 200 µs max. (50% Load Step) Output Specifications Relative Humidity 95% max. (non condensing) Temperature Ranges - Operating Temperature –40°C to +85°C - Case Temperature +105°C max. - Storage Temperature –55°C to +125°C Power Derating - High Temperature Depending on model See application note: www.tracopower.com/overview/tsr2 General Specifications TSR 2 Series, 2 A All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 2 / 4
- Protection Mode 150°C typ. (Automatic recovery) - Measurement Point Internal IC temperature Cooling System Natural convection (20 LFM) Switching Frequency 1200 kHz typ. (PWM) (5 Vin models) 410 kHz typ. (PWM) (other models) Insulation System Non-isolated Reliability - Calculated MTBF 13'520'000 h (MIL-HDBK-217F, ground benign) Washing Process Allowed (hermetical product) See Cleaning Guideline: www.tracopower.com/info/cleaning.pdf Environment - Vibration MIL-STD-810F - Thermal Shock MIL-STD-810F Housing Material Non-conductive Plastic (UL 94 V-0 rated) Potting Material Silicone (UL 94 V-0 rated) Pin Material Copper Pin Foundation Plating Nickel (2 - 3 µm) Pin Surface Plating Tin (3 - 5 µm), matte Housing Type Plastic Case Mounting Type PCB Mount Connection Type THD (Through-Hole Device) Footprint Type SIP3 Soldering Profile 260°C / 10 s max. Weight 2.6 g Environmental Compliance - REACH Declaration www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant - RoHS Declaration www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule). The SCIP number is provided on request.) Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tsr2 TSR 2 Series, 2 A All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 3 / 4
TSR 2 Series, 2 A 1 2 3 10.1 (0.40) 4.1 (0.16) 0.5 (0.02) 0.5 (0.02) 7.50 (0.30) 3.89 (0.16) 0.46 x 0.46 (0.018 x 0.018) Bottom View Dimensions in mm (inch) Tolerances: x.xx ±0.5 (±0.02) Tolerances: x.xxx ±0.25 (±0.01) Pin pich tolerances: ±0.25 (±0.01) Pin dimension tolerance: ±0.1 (±0.004) 14.0 (0.55) Pinout Pin Function 1 +Vin
2 GND
© Copyright 2022 Traco Electronic AG Specification s can be changed without notice. www.tracopower.com Rev. November 30, 2022 Page 4 / 4