TSP-REM TRACOPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

◆ Module for true current sharing operation ◆ Alarm outputs, redundancy OK signal ◆ Hot swappable inputs ◆ Remote On/Off ◆ International safety approval package ◆ 3-year product warranty With this module and two power supplies of the TSP series (of same type) a highly reliable, redundant power system can be configured without any additional compo- nents. This module enforces the equivalent sharing of the output current of the power supplies. In the event of a failed or disconnected power supply, the second unit will automatically supply the full current to the load. The redundancy of the system is monitored and, indicated by an alarm output. The inputs are hot swappable. Order Code Input Max Power per Input Output Voltage adjust. Output Current max.** Output Power max. TSP–REM360* 2 x 24 VDC 2 x 360 W 24 VDC 15.0 A 360 W TSP–REM600* 2 x Control input 2 x 600 W (24–27 VDC) 25.0 A 600 W Models * For ATEX / IECEx compliant model add appendix -EX to order code. ** Maximum current at nominal Vout IEC 60950-1 UL 508 UL 60079-15 ATEX II3GEMC LVD CB Scheme Redundancy Module Possible TSP input source TSP–REM360 TSP 90-124 TSP 90-124N TSP 180-124 TSP 360-124 TSP–REM600 TSP 600-124 CB SchemeUL 508 UL 60079-15

www.tracopower.com Page 2 of 4 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Redundancy Modules TSP-REM Series 90–600 Watt Output Specifications Ouput Voltage adjustable range with potentiometer 24 – 27 VDC Ripple and noise (20 MHz bandwidth) 230 mVp-p typ. Capacitive load unlimited General Specifications Operating temperature –25°C to +70°C max. derating above +40°C : 1.5 %/K Storage temperature –25°C to +85°C max. Temperature coefficient 0.02 %/K Humidity (non condensing) 5 % to 90 % rel. H max. Reliability, calculated MTBF at +25°C acc. to IEC 61709 – TSP–REM360 >2 Mio h – TSP–REM600 >1.9 Mio h Remote On/Off by ext. contact: contact open = On contact closed = Off Alarm relay contact 30 VDC / 1.0 A Redundancy OK signal (Alarm) trigger threshold at 18...22VDC, contact open one or both Remote link cable (0.5 m) 2 cables included (order code TSP-JC) www.tracopower.com/products/tsp-jc.pdf Degree of protection IP 20 (IEC/EN 60529) Isolation according to IEC/EN 60950-1, UL 60950-1, UL 508 Altitude during operation tba. Safety standard IEC/EN 60950-1, UL 60950-, EN60079 , UL60079 , UL508 IEC/EN 61010-1, IEC/EN 61010-2-201 Safety approvals UL 508 II3G Ex nA nC llC T4 Gc – CSA UL60079-15-2 class 1, division 2 – CB test certificate IEC 60950-1 (SIQ for EN) IEC/EN 61010-1, IEC/EN 61010-2-201 – Certification documents www.tracopower.com/overview/tsp Electromagnetic compatibility in correspondence to connected units (no internal switching device) Environment – Vibration acc. IEC 60068-2-6; 3 axis, sine sweep, 10 – 55 Hz, 1 g, 1 oct/min – Shock acc. IEC 60068-2-27 3 axis, 15 g half sine, 1 1 ms Enclosure material aluminium (chassis) / stainless steel (cover) Mounting – DIN-rail mounting for DIN-rails as per EN 50022-35x15/7 .5 (snap-on with self-locking spring) – Wall mounting (option) with wall mounting bracket - see page 4 Connection detachable screw terminals (plugs included) 2 terminals per output Installation instructions www.tracopower.com/overview/tsp

www.tracopower.com Page 3 of 4 Redundancy Modules TSP-REM Series 90–600 Watt Outline Dimensions TSP-REM360 35.0 110.0 (1.38) (4.33) 110.0 (4.33) 25.0 (0.98) 5.0 (0.20) 5.0 (0.20) Output- - + + DC IN 1 - + - + DC IN 2 Inputs ON 24 -27 V Remote ON/OFF DC OK 54.0 110.0 (2.13) (4.33) 110.0 (4.33) 25.0 (0.98) 5.0 (0.20) 14.5 (0.57) DC 24V / 25 A DC IN 1D C IN 2 Inputs ON 24 -27 V Remote ON/OFF DC OK TSP-REM600 Function REM Controller TSP TSP Volt adjust Output Load Alarm DC IN 1 J1.2 J1.1 J3.1 J3.2 DC IN 2 J1.4 J1.3 J4.1 J4.2 J5.1 J5.2 J2.2 J2.1 J2.4 J2.3 Remote Link 2 Redundancy ok Remote Link 1 Remote On/Off J5.3 J5.4 Power Supplies Function Diagram:

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com Rev. May 3, 2021 Ordercode of Kit For Models Content of Kit TSP-WMK03 TSP-REM360, TSP-REM600 1 bracket TSP–WMK Wall Mounting Bracket 15.0 (0.59) 7.0 (0.28) 15.0 (0.59) Material: 2 mm Mild Steel Tolerance: ±0.1mm (± 0.004) 55.0 (2.16) 46.0 (1.81) 33.0 (1.30) 25 (0.98) 50.0 (1.97) 2x ø4.3 (0.17) 4 x positioning holes 2.0 (0.08) Material: 2 mm Mild Steel Tolerance: ±0.1mm (± 0.004) 62.5 (2.46) 96.0 (3.78) 62.5 (2.46) 173.0 (6.81) TSP 360 TSP 600 2.0 (0.08) 30.0 (1.18) 15.0 (0.59) ø 4.3 (0.17) 7.0 (0.28) TSP 070 TSP 090 TSP 140 TSP 180 ø 4.25 (0.17) 2.0 (0.08) 2.0 (0.08) R 2.12 (0.083) R 2.12 (0.083) 85.0 (3.35) 42.5 (1.67) 74.0 (2.91) 37.0 (1.45) 4 x positioning holes TSP-WMK03 Redundancy Modules TSP-REM Series 90–600 Watt