TSN1 TRACOPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Non-Isolated DC/DC Converter (POL) TSN 1 Series, 1 A
- Non-isolated converter for negative output
- Small size and low profile
- Pin compatible with LM79xx linear regulators
- No heatsink required
- High efficiency up to 96%
- Operation temp. range –40°C to +85°C
- Protection against overload, short circuit and over-temperature
- Fixed switching frequency
- Wide input range up to –32 VDC
- Excellent line / load regulation The new TSN 1 series step-down switching regulators are drop-in replacement for inefficient LM79xx linear regulators. A high efficiency up to 96 % allows full load operation up to +70°C (+85°C with derating) ambient temperature with- out the need of any heat-sink or forced air cooling. The TSN 1 switching regula- tors provide other significant features over linear regulators, i.e. better output accuracy (±2 %), lower standby current of ~2 mA and no requirement of exter- nal capacitors. They are suitable for negative output circuits. The high efficiency and low standby power consumption make these regulators an ideal solution for energy sensitive applications. Models Order Code Output Current Input Voltage Output Voltage Efficiency max. Range nom. typ. TSN 1-2450 1'000 mA –7 to –32 VDC (–12 VDC nom.) –5 VDC 88 % TSN 1-2452 –5.2 VDC 89 % TSN 1-2460 –8 to –32 VDC (–12 VDC nom.) –6 VDC 90 % TSN 1-2480 –10.5 to –32 VDC (–12 VDC nom.) –8 VDC 92 % TSN 1-2490 –11.5 to –32 VDC (–24 VDC nom.) –9 VDC 93 % TSN 1-24120 –15 to –32 VDC (–24 VDC nom.) –12 VDC 94 % TSN 1-24150 –18 to –32 VDC (–24 VDC nom.) –15 VDC 95 % Options Suffix A - Optional models with angular pin version www.tracopower.com November 30, 2022 Page 1 / 4
Input Current - At no load -12 Vin models: 3 mA typ. -24 Vin models: 3 mA typ. Reflected Ripple Current 100 mAp-p typ. Recommended Input Fuse -12 Vin models: 1'600 mA (slow blow) -24 Vin models: 1'600 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Capacitor Input Specifications Voltage Set Accuracy ±2% max. Regulation - Input Variation (Vmin - Vmax) 1% max. - Load Variation (10 - 100%) 0.6% max. Ripple and Noise (20 MHz Bandwidth) -24 Vin models: 75 mVp-p max. -5 Vout models: 50 mVp-p max. -5.2 Vout models: 50 mVp-p max. -6 Vout models: 75 mVp-p max. -8 Vout models: 75 mVp-p max. Capacitive Load -5 Vout models: 1'600 µF max. -5.2 Vout models: 1'600 µF max. -6 Vout models: 1'000 µF max. -8 Vout models: 1'000 µF max. -9 Vout models: 1'000 µF max. -12 Vout models: 470 µF max. -15 Vout models: 470 µF max. Minimum Load 10 % of Iout max. Temperature Coefficient ±0.015 %/K max. Start-up Time 15 ms max. Short Circuit Protection Continuous, Automatic recovery Transient Response - Response Deviation 5% typ. / 7% max. (50% to 100% Load Step) - Response Time 250 µs typ. / 350 µs max. (50% to 100% Load Step) Output Specifications Relative Humidity 95% max. (non condensing) Temperature Ranges - Operating Temperature –40°C to +85°C - Storage Temperature –55°C to +125°C Power Derating - High Temperature Depending on model See application note: www.tracopower.com/overview/tsn1 Over Temperature Protection Switch Off - Protection Mode 165°C typ. (Latch off) - Measurement Point Internal IC temperature Operation at lower load will not damage the converter, but it may not meet all specifications listed Cooling System Natural convection (20 LFM) Switching Frequency 323 - 437 kHz (PWM) (380 kHz typ.) (5 & 5.2 Vout models) 425 - 575 kHz (PWM) (500 kHz typ.) (other Vout models) Insulation System Non-isolated Reliability - Calculated MTBF 8'475'000 h (MIL-HDBK-217F, ground benign) Washing Process Allowed (hermetical product) See Cleaning Guideline: www.tracopower.com/info/cleaning.pdf General Specifications TSN 1 Series, 1 A All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 2 / 4
Environment - Vibration MIL-STD-810F - Mechanical Shock MIL-STD-810F - Thermal Shock MIL-STD-810F Housing Material Plastic (UL 94 V-0 rated) Potting Material Silicone (UL 94 V-0 rated) Pin Material Copper Pin Foundation Plating Nickel (2 - 3 µm) Pin Surface Plating Tin (3 - 5 µm), matte Housing Type Plastic Case Mounting Type PCB Mount Connection Type THD (Through-Hole Device) Footprint Type SIP3 Soldering Profile Wave Soldering 265°C / 10 s max. Weight 3.1 g Environmental Compliance - REACH Declaration www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant - RoHS Declaration www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule). The SCIP number is provided on request.) Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tsn1 Outline Dimensions Straight pin version TSN 1 Series, 1 A All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 3 / 4 Dimensions in mm (inch) Tolerances: x.x ±0.5 (±0.02) x.xx ±0.25 (±0.01) Pin dimension tolerance ±0.004 ( ±0.1) Bottom view 1 2 3 4.1 (0.16) 0.5 (0.02) 16.5 (0.65) 7.5 (0.30) 0.5 (0.020) 0.25 (0.010) 3.1 (0.12) 11.7 (0.46) 3.3 (0.13) 2x2.54 (2x0.10) Pinout Pin Single
1 GND
2 –Vin 3 –Vout
Angular pin version (suffix A) TSN 1 Series, 1 A Dimensions in mm (inch) Tolerances: x.x ±0.5 (±0.02) x.xx ±0.25 (±0.01) Pin dimension tolerance ±0.004 ( ±0.1) Bottom view 1 2 3 4.1 (0.16) 0.5 (0.02) 16.5 (0.65) 7.5 (0.30) 0.5 (0.02) 0.25 (0.01) 1.5 (0.06) 3.0 (0.11) 11.7 (0.46) 3.3 (0.13) 2x2.54 (2x0.10) Pinout Pin Single 2 –Vin 3 –Vout © Copyright 2022 Traco Electronic AG Specification s can be changed without notice. www.tracopower.com Rev. November 30, 2022 Page 4 / 4