TPC TRACOPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

◆ For industrial, office and residential environments ◆ Meets European ErP directive (green mode), <0.3 W no load power consumption ◆ High efficiency across full load range ◆ Compact plastic casing ◆ Reliable snap-on mounting on DIN-rails or with wall mounting bracket (not included) ◆ Universal input 85–264 VAC, 47–63 Hz ◆ Models with 5, 12, 24 & 48 VDC output ◆ Output voltage adjustable ◆ Power good signal ◆ Low ripple and noise ◆ Overload and short-circuit protection ◆ Optional module for parallel and redundant operation ◆ Worldwide safety approval package ◆ 3-year product warranty The TRACOPOWER TPC series is a family of lightweight DIN-rail power supplies with an excellent price/performance ratio. They consume sparse standby power, and op- erate with high efficiency to comply with the requirements of the European Ecodesign directive. They have universal input of 85-264VAC or 90-375VDC and are designed for class I operation in industrial and residential environments. With the optional active current sharing redundancy module, these power supplies provide a very reliable true redundant DC supply. For further details see page 3. Order Code Input Voltage Output Power Output Voltage Output Current Ranges max. nominal /adj. range max. TPC 030–105 20 W 5.0 VDC /5.0–6.0 VDC 4.0 A TPC 030–112 26 W 12 VDC /12–15 VDC 2.2 A TPC 030–124 30 W 24 VDC /24–28.8 VDC 1.25 A TPC 030–148 85 – 264 VAC 30 W 48 VDC /48–56 VDC 0.6 A TPC 055–112 Universal Input 42 W 12 VDC / 12–15 VDC 3.5 A TPC 055–124 47/63 Hz 55 W 24 VDC /24–28.8 VDC 2.3 A TPC 055–148 90 – 375 VDC 55 W 48 VDC / 48–56 VDC 1.15 A TPC 080–112 72 W 12 VDC / 12–15 VDC 6.0 A TPC 080–124 80 W 24 VDC /24–28.8 VDC 3.3 A TPC 080–148 80 W 48 VDC /48–56 VDC 1.7 A TPC 120–112 96 W 12 VDC / 12–15 VDC 8.0 A TPC 120–124 120 W 24 VDC /24–28.8 VDC 5.0 A TPC 120–148 120 W 48 VDC /48–56 VDC 2.5 A Models UL 60950-1U L 508 CB Scheme

http://www.tracopower.com Page 2 of 4 Industrial Power Supplies TPC Series 30 to 120 Watt Input Specifications Input voltage range – AC nominal rated 1 10 – 240 VAC, 50-60 Hz – AC range (designed for) 85 – 264 VAC, 47-63 Hz – DC nominal rated 130 – 300 VDC – DC range (designed for) 90 – 375 VDC Output derating – at operation <100 VAC -2.5% /V – at operation <130 VDC -1.0% /VDC Standby power consumption TPC 030 and 055 models: < 0.3 W TPC 080 and 120 models: < 0.5 W Harmonic limits EN 61000-3-2, Class A Recommended circuit breaker, characteristic C 6.0 – 16.0 A Output Specifications Output voltage adjustable range 5 VDC model: 5.0 – 6.0 VDC (potentiometer on frontpanel) 12 VDC models: 12 – 15 VDC 24 VDC models: 24 – 28.8 VDC

48 VDC models: 48 – 56 VDC

Regulation – Input variation 0.5 % max. – Load variation (0–100 %) 5 VDC models: 0.75 % max. other models: 0.5 % max. Ripple and noise (20MHz bandwidth) 100 mVpk-pk max. Short circuit protection <200 % of Iout nom. Overvoltage protection (% of max. adjustable voltage) 5 VDC model: <180 %

12 VDC models: <170 %

24 VDC models: <160 %

48 VDC models: <107 %

Power back immunity 125 % of nominal Vout Start-up time 2 sec. max. Hold-up time (1 15 VAC / 230 VAC) min. 15 ms / min. 40 ms Power OK signal – trigger 80 – 95 % – PNP open collector max. current 48 VDC models: 5 mA other models: 10 mA General Specifications Temperature ranges – Operating –25°C to +70°C max. – Storage (non operating) –25°C to +85°C Temperature derating 2.5 %/K above 50°C Humidity (non condensing) 95 % rel. H max. Temperature coefficient 0.02 %/K Remote On/Off 10 mA current source Efficiency (average at power consumption 25-100%) TPC 030-105: 79 % other 30 Watt models: 84 % other models: 87 % Reliability, calculated MTBF at +25°C TPC 030 models: >2.2 Mio h (according to IEC-1709) TPC 055 models: >1.7 Mio h TPC 080 models: >1.5 Mio h TPC 120 models: >1.3 Mio h Isolation voltage (60 s) – Input / Output 3000 VAC Altitude during operation 2‘000 m max.

http://www.tracopower.com Page 3 of 4 General Specifications Safety standards – CB test certificate IEC 60950-1:2005 2nd Ed, Am 1:2009 IEC/EN 61010-1, IEC 61010-2-201 – SIQ type approved EN 60950-1 :2006 + Am 1 :2010 + Am 1 1 :2009 + Am 12:201 1 IEC/EN 61010-1, IEC/EN 61010-2-201 – CSA certificate of compliance UL 60950-1-2nd Ed CSA 60950-1-07-2nd Ed – UL certificate of compliance UL 508, CSA C22.2 No.107 .1-01 – SIQ type approved EN 60204-1:2006 + A1:2009, EN 61558-2-8:2010, EN 61558-2-16:2009 , EN 50178:1997 – Certification documents www.tracopower.com/overview/tpc Environmental compliance – Reach declaration document www.tracopower.com/info/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU EMC – emissions IEC 61000-6-3 (residential environment) – immunity IEC 61000-6-2 (industrial environment) SEMI F47 Class of protection class I (earth connection needed) Case protection IP 20 (IEC 60529) Enclosure material Makrolon 2405 (UL 94V-0 rated) Mounting DIN-rails as per EN 50022-35x15/7 .5 (snap-on with self-locking spring) wall mounting bracket optional (not included) Industrial Power Supplies TPC Series 30 to 120 Watt All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. TPC–REM240-24 Redundancy Module These modules are external units for operation with two TPC power supplies with output voltage of 24 VDC or 48 VDCand of same type and power. The modules allow to connect two outputs of TPC power supplies together in order to achieve a reliable DC supply. In normal operation the module achieves equal current share for both power supplies connected. During the redundancy operation, if one of the power supplies fails, the output power will be provided in full by the remain - ing operating power supply. The redundancy of the DC system is monitored by a DC-OK signal. Order Code Nominal Input Voltage Max Power per Input Output Voltage adjustable Output Current max. TPC–REM240–24 24 VDC 120 W 24 – 27 VDC 10 A TPC–REM240–48 48 VDC 48 – 55 VDC 5 A Specifications Operating temperature –25°C to +70°C max. (with derating) Electromagnetic compatibility in correspondence to connected units (no internal switching device) Dimensions same as model TPC 055 (see page 4) Connection screw terminal block Installation instructions – installation document www.tracopower.com/overview/tpc Supporting documents: www.tracopower.com/overview/tpc

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com Industrial Power Supplies TPC Series 30 to 120 Watt Rev. February 1, 2021 Case Dimensions Dimensions in [mm], ( ) = Inch Tolerances: ±0.5 mm (±0.02) d -- ++ DC-OK PE NL DC-ON V adj. w h Model Width (W) Heigth Depth d Weight Wall Mounting Bracket (accessories not included) Order Code For Models Dimensions TPC–WMK1 TPC 030-xx 26.0 x 35 x 7.5 TPC–WMK2 TPC 055-xx, TPC-REM 240–24 42.7 x 35 x 7.5 TPC-WMK3 TPC 080-xx 60.7 x 35 x 7.5 TPC-WMK4 TPC 120-xx 69.7 x 35 x 7.5Snap-on bracket for wall mounting (black plastic)