TPA10 TELEDYNE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
- Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
- Automatic probe detection
- Provides all necessary power and offset control to the attached probe
- Supports probes up to 4 GHz
- Easy firmware updates
- Wide variety of probes supported including: – Preamplifiers – Current Probes – Single-Ended Active Probes – Differential Active Probes Leverage Existing Probes Investing in new probes can be very expensive. With the TPA10, existing TekProbe probes can be used on Teledyne LeCroy oscilloscopes, allowing for easy and affordable access to the latest in oscilloscope technology. Automatic Probe Detection Simply plug the TPA10 into any ProBus-equipped Teledyne LeCroy oscilloscope, attach a supported TekProbe interface level II probe,and the oscilloscope will automatically detect which probe is attached. Wide Variety of Supported Probes The TPA10 ProBus Probe Adapter supports many popular probes up to
4 GHz including: preamplifiers, current
probes, single-ended active probes and differential active probes. Easy Firmware Updates The firmware for the TPA10 is included in the oscilloscope software. If an updated firmware version for the TPA10 is available, an “Update Firmware” button will automatically appear on the dialog making updates simple. The TPA10 Tektronix TekProbe Probe Adapter permits connection of select Tektronix TekProbe interface level II probes to any ProBus-equipped Teledyne LeCroy oscilloscope. The TPA10 automatically detects which Tektronix probe is attached and supplies all necessary power and offset control to the probe, and communicates the probe signal to the Teledyne LeCroy oscilloscope.
SPECIFICATIONS & ORDERING INFORMATION © 2015 Teledyne LeCroy, Inc. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice. Product or brand names are trademarks or requested trademarks of their respective holders. tpa10-ds-08jul15 Local sales offices are located throughout the world. Visit our website to find the most convenient location. 1-800-5-LeCroy teledynelecroy.com Product Description Product Code TekProbe to ProBus Probe Adapter TPA10 Set of 4 TPA10 TekProbe to ProBus Probe Adapters. Includes soft carrying case. TPA10-QUADPAK Customer Service Teledyne LeCroy oscilloscopes and probes are designed, built, and tested to ensure high reliability. In the unlikely event you experience difficulties, our digital oscilloscopes are fully warranted for three years and our probes are warranted for one year. This warranty includes:
- No charge for return shipping
- Long-term 7-year support
- Upgrade to latest software at no charge Supported Probes The following TekProbe devices are supported for use with TPA10: Preamplifiers
1 MHz Differential Preamplifier ADA400A
50 MHz AC/DC Current Probe TCP202/TCP202A
Single-ended Active Probes
750 MHz Single-ended Active Probe P6205
1 GHz Single-ended Active Probe P6243
1.5 GHz Single-ended Active Probe P6245
4 GHz Single-ended Active Probe P6241
4 GHz Single-ended Active Probe P6249
Differential Active Probes
100 MHz Differential Probe P5205/P5205A
50 MHz Differential Probe P5210/P5210A
400 MHz Differential Probe P6246
1 GHz Differential Probe P6247
1.5 GHz Differential Probe P6248
500 MHz Differential Probe P6250
1 GHz Differential Probe P6251
Electrical Characteristics
Bandwidth 4 GHz (adapter only) Power Supplies +15V, -15V, +5V, -5V (each 2%) Offset Voltage ±1V (1%) Max. Input Voltage 47 Vpk, 33 Vrms Environmental Operating Temperature Range 0 to 50 ºC Non-operating Temperature Range -40 to +70 ºC Humidity 5% to 95% RH (10 to 40 ºC); 5% to 75% (above 40 ºC); RH not controlled below 10 ºC Operating Altitude 3000 meters maximum Physical Dimensions (WxHxD) 39 mm x 31.1 mm x 88.6 mm Weight 119 g (0.26 lb) The TPA10 requires the Teledyne LeCroy oscilloscope to be running firmware version 7.8.0.0 or greater.