136C TELEDYNE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

© 2021 TELEDYNE RELAYS (800) 284-7007 • www.teledynedefenseelectronics.com Page 1 Series 136C CMOS DPDT Non-Latching Established Reliability / Military Relay 136C\\072021 SERIES RELAY TYPE 136C DPDT sensitive relay with internal power MOSFET driver, Zener diode gate protection, and diode coil suppression

DESCRIPTION

The sensitive 136C Centigrid® relay is an ultraminiature, hermetically sealed, armature relay capable of being directly driven by most IC logic families. Its .100” grid spaced terminals, which preclude the need for spreader pads, make it ideal for applications where extreme packaging density and/or close PC board spacing are required. The basic concept and internal mechanical structure are similar to the 134 DPDT relay. The following unique construction features and manufacturing techniques provide overall high reliability and excellent resistance to environmental extremes: The 136C feature:

  • All welded construction.
  • Advanced cleaning techniques provide maximum assurance of internal cleanliness.
  • Unique uni-frame design providing high magnetic efficiency and mechanical rigidity.
  • High force/mass ratios for resistance to shock and vibration.
  • Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities.
  • Low operating power By virtue of its inherently low intercontact capacitance and contact circuit losses, the 136C relay has proven to be an excellent ultraminiature RF switch for frequency ranges well into the UHF spectrum. A typical RF application for this Centigrid® relay is in handheld radio transceivers, wherein the combined features of good RF performance, small size, low coil power dissipation and high reliability make it a preferred method of Transmit-Receive switching. The Series 136C utilizes an internal silicon diode for coil suppression, a Zener diode to protect the MOSFET gate input, and an N-channel enhancement mode MOSFET chip, which enables direct relay interfacing with most Microprocessor and IC logic families (CMOS, TTL and MOS). CENTIGRID ® ESTABLISHED RELIABILITY MILITARY DPDT SENSITIVE CMOS COMPATIBLE ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Temperature (Ambient) –65°C to +125°C Vibration (Note 1) 30 g’s to 3000 Hz Shock (Note 1) 75 g’s, 6ms half sine Acceleration 50 g’s Enclosure Hermetically sealed Weight 0.18 oz. (5.11g) max. Reflow Temperature 260°C max. temp. 1 min. max INTERNAL CONSTRUCTION INTERNAL CONSTRUCTION UPPER STATIONARY CONTACT LOWER STATIONARY CONTACT UNI-FRAME ARMATURE MOVING CONTACT

Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2021 TELEDYNE RELAYS Series 136C CMOS DPDT Non-Latching Established Reliability / Military Relay 136C\\072021 GENERAL ELECTRICAL SPECIFICATIONS (-65 °C to 125 °C unless otherwise noted. See notes 2 & 3.) Contact Arrangement 2 Form C (DPDT) Rated Duty Continuous Contact Resistance 0.1 ohm max. before life; 0.2 ohm max. after life at 1A/28Vdc Contact Load Rating (DC) Resistive: 1 A/ 28 V dc Inductive: 200 mA/ 28 V dc (320mH) Lamp: 100 mA / 28 V dc (320mH) Low level: 10 to 50 μA @ 10 to 50 mV Contact Load Rating (AC) Resistive: 250 mA / 115Vac, 60 and 400 Hz (Case not grounded) 100 mA / 115 Vac, 60 and 400 Hz (Case grounded) Contact Life Ratings 10,000,000 cycles (typical) at low level 1,000,000 cycles (typical) at 0.5 A / 28 Vdc resistive 100,000 cycles min. at all other loads specified above Contact Overload Rating 2 A / 28 Vdc Resistive (100 cycles min.) Contact Carry Rating Contact Factory Operate Time 4.0 ms max. at nominal rated coil voltage Release Time 7.5 ms max. Contact Bounce 1.5 ms max. Intercontact Capacitance 0.4 pf typical Insulation Resistance 10,000 MΩ min. between mutually isolated terminals Dielectric Strength (V rms/60 Hz) Atmospheric pressure: 500 70,000 ft: 125 Negative Coil Transient 1.0 Vdc Max. Diode P.I.V. 100 Vdc Min. Zener Voltage Min. 17 Vdc Max. 23 Vdc Zener Leakage Current (µA at 15.2 Vdc) (max.) 2.5 µA Power FET Characteristics (-65°C to +125°C) (Vdc, Max.) Turn Off Gate Voltage 0.5 Turn On Gate Voltage 3.8 (Note 4) Drain-Source Voltage 55 ER 136C U M4 - 26 A / S Q Established Reliability Designator Relay Series Ground Pin Option (See Appendix A) Pad Option (See Appendix A) Q = Solder-Coated Leads (Sn60/Pb40) R = RoHS Compliant Solder (Sn99.7/Cu0.7) No Suffix = Gold-plated Leads S = 0.187” Leads No Suffix = 0.75” Leads Screening and Reliability Level (A or B) Nominal Coil Voltage (5 = 5V) (12 = 12V) (26 = 26.5 V) Part Numbering System (5 &6) J 136C U M4 - 26 P L / Q Military (JAN) Designator Relay Series Ground Pin Option (See Appendix A) Pad Option (See Appendix A) P = 0.187” Leads No Suffix = 0.75” Leads Screening and Reliability Level (L or M) Nominal Coil Voltage (26 = 26.5 V, 12 = 12V, 5 = 5V) T2R Established Reliability Relays Military Qualified (JAN) Relays Q = Solder-Coated Leads (Sn60/ Pb40) No Suffix = Gold-Plated Leads

Page 4 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2021 TELEDYNE RELAYS Series 136C CMOS DPDT Non-Latching Established Reliability / Military Relay 136C\\072021 SERIES 136C OUTLINE DIMENSIONS SCHEMATIC DIAGRAMS 136C (Viewed From Terminals)Dimensions: in. (mm) 19 10 PIN 1: + Supply PIN 9: - Supply PIN 10: GATE Logic element 1 = 3.8 to 15Vdc 0 = 0.5Vdc min. Pin10 Pin 9 Pin 1 VrVcc TYPICAL CMOS INTERFACE CIRCUIT DC Logic Voltage Supply CASE DETAIL .335 MAX. (8.51) .435 MAX. (11.05) .375 MAX. (9.53) .375 MAX. (9.53) .75 MIN. (19.05) .100 ±.010 (2.54 ±.25) TYP ±.001 (.043)

9 LEADS

.031 ±.003 (.79 ±.08) .035 ±.010 (.89 ±.25) .475 MAX. (12.06) .200 ±.010 (5.08 ±0.25) 9 10 CASE DETAIL .335 MAX. (8.51) .435 MAX. (11.05) .375 MAX. (9.53) .375 MAX. (9.53) .75 MIN. (19.05) .100 ±.010 (2.54 ±.25) TYP ±.001 (.043) .031 ±.003 (.79 ±.08) .035 ±.010 (.89 ±.25) .475 MAX. (12.06) .200 ±.010 (5.08 ±0.25) 9 10 Notes: Logic 1 activates the relay. Logic 0 de-activates the relay. Vcc = logic bias power. Vr = coil energization voltage.

© 2021 TELEDYNE RELAYS (800) 284-7007 • www.teledynedefenseelectronics.com Page 5 Series 136C CMOS DPDT Non-Latching Established Reliability / Military Relay 136C\\072021 Pad designation and bottom view dimen- sions Height For use with the follow- ing: Dim. H Max. “M9”Spacer Pad for Centigrid® 122C, A152 .320 (8.13) ER116C, J116C .300 (7.62) ER136C, J136C .400 (10.16) RF180 .325 (8.25) A150 .305 (7.75) Notes: 1. Spacer pad material: Polyester film. 2. To specify a “M9” spacer pad, refer to the mounting variants portion of the part numbering example in the applicable datasheet. 3. Dimensions are in inches (mm). 4. Unless otherwise specified, tolerance is ± .010” (.25 mm). 5. Add 10 mΩ to the contact resistance shown in the datasheet. .156 [3.96] (REF) .256 [6.5] (REF) Ø.150 [3.81] (REF) Dim H MAX Dim H MAX Dim H MAX Dim H MAX .156 [3.96] (REF) .256 [6.5] (REF) Ø.150 [3.81] (REF) Dim H MAX Dim H MAX Dim H MAX Dim H MAX APPENDIX A : Spacer Pads NOTES 1. Terminal views shown 2. Dimensions are in inches (mm) 3. Tolerances: ± .010 (±.25) unless otherwise specified 4. Ground pin positions are within .015 (0.38) dia. of true position .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] 36°±3° Ø.200 [Ø5.08] 45°±3° "Z" POSITION "Y" POSITION "X" POSITION "W" POSITION "U" POSITION (ER116C and ER136C only) "X" POSITION "Z" POSITION "Y" POSITION "Y" POSITION "Z" POSITION "Z" POSITION "Y" POSITION LEGEND: Glass Insulated Lead position Ground Pin position Either Ground Pin or Insulated Lead position depending on Relay type .050 [1.27] Ø.200 [Ø5.08] Indicates ground pin position Indicates glass insulated lead position Indicates ground pin or lead position depending on relay type .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] 36°±3° Ø.200 [Ø5.08] 45°±3° "Z" POSITION "Y" POSITION "X" POSITION "W" POSITION "U" POSITION (ER116C and ER136C only) "X" POSITION "Z" POSITION "Y" POSITION "Y" POSITION "Z" POSITION "Z" POSITION "Y" POSITION LEGEND: Glass Insulated Lead position Ground Pin position Either Ground Pin or Insulated Lead position depending on Relay type .050 [1.27] Ø.200 [Ø5.08] .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] 36°±3° Ø.200 [Ø5.08] 45°±3° "Z" POSITION "Y" POSITION "X" POSITION "W" POSITION "U" POSITION (ER116C and ER136C only) "X" POSITION "Z" POSITION "Y" POSITION "Y" POSITION "Z" POSITION "Z" POSITION "Y" POSITION LEGEND: Glass Insulated Lead position Ground Pin position Either Ground Pin or Insulated Lead position depending on Relay type .050 [1.27] Ø.200 [Ø5.08] APPENDIX A : Ground Pin Positions