TML-20-40 TRACOPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

u Encapsulated power supplies with increased power density u Replaces TML 15 and TML 30 series u PCB mount or chassis mount with screw terminals u Single, dual and triple output models u Universal input 90–264 VAC, 47–440 Hz u EMI meets EN 55032, class B and FCC, level B u Protection class ll u Short circuit and overload protection u 3-year product warranty Order code Output power max. Output 1 Output 2 Output 3 PCB mount Chassis mount TML 20103 TML 20103C 1 4.9 W 3.3 VDC/4500 mA TML 20105 TML 20105C 5.0 VDC/4000 mA TML 201 1 2 TML 201 1 2C 1 2 VDC/1 670 mA TML 201 15 TML 201 15C 1 5 VDC/1340 mA TML 201 24 TML 201 24C 20 W 24 VDC/840 mA TML 20205 TML 20205C +5.0 VDC/2000 mA –5.0 VDC/2000 mA TML 2021 2 TML 2021 2C +1 2 VDC/833 mA –1 2 VDC/833 mA TML 20215 TML 20215C +1 5 VDC/667 mA –1 5 VDC/667 mA TML 2051 2 TML 2051 2C *5 VDC/2800 mA +1 2 VDC/250 mA –1 2 VDC/250 mA TML 20515 TML 20515C *5 VDC/2800 mA +1 5 VDC/200 mA –1 5 VDC/200 mA

20 Watt Models

Also see: TMLM Series, 4 to 20 Watt highest power density, PCB mount. www.tracopower.com/products/tmlm.pdf Referance datasheet for primary TML models, see: www.tracopower.com/products/tml-primary.pdf (not recommended for new design in) * Output floating

www.tracopower.com Page 2 of 5 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. AC/DC Power Modules TML Series 20 & 40 Watt Input Specifications Input voltage ranges – AC input 90 – 264 VAC – DC Input 100 – 375 VDC Input frequency 47 – 440 Hz Input current at full load (1 15 VAC / 230 VAC nominal input) TML 20 models: 400 mA / 270 mA max. TML 40 models: 860 mA / 460 mA max. Leakage current TML 20 models: 0.25 mA max. TML 40 models: 0.75 mA max. Recommended Input Fuse TML 20 models: 2.0 A (slow blow) TML 40 models: 1.5 A (slow blow) (The need of an external fuse has to be assessed in the final application.) Output Specifications Voltage set accuracy TML 20 models: ±2 % TML 40103 model: ±3 % TML 40 single and symetric dual output models: ±2 % TML 40 asymetric dual and triple output models: ±3 % for output 1, ±5 % for output 2&3 Minimum load TML 20 single and dual output models: 0 % TML 20 triple output models: 10 % (each output) TML 40 single output models: 1 % TML 40 symetric dual output models: 10 % (each output) TML 40 asymetric dual and triple output models: 25 % (each output) operation at lower load condition will not damage these power supplies, how ever, they may not meet all listed specifications. Ripple and noise (20 MHz bandwidth) TML 20 models: <0.7 % of Vout + 90 mV [Vp-p] TML 40103 model: <50 mVp-p TML 40 other models: <1 % of Vout [Vp-p] Regulation – Input variation single and symetric dual output models: 0.5 % (each output) TML 20 triple output models: 1 % for output 1, 5 % for output 2&3 TML 40 asymetric dual and triple output models: 0.5 % for output 1, 5 % for output 2&3 Order code Output power max. Output 1 Output 2 Output 3 PCB mount Chassis mount TML 40103 TML 40103C 26.4 W 3.3 VDC/8000 mA TML 40105 TML 40105C 5.0 VDC/8000 mA TML 401 1 2 TML 401 1 2C 1 2 VDC/3333 mA TML 401 15 TML 401 15C 1 5 VDC/2666 mA TML 401 24 TML 401 24C 24 VDC/1 667 mA TML 40205 TML 40205C 40 W +5.0 VDC/4000 mA –5.0 VDC/4000 mA TML 4021 2 TML 4021 2C +1 2 VDC/1 666 mA –1 2 VDC/1 666 mA TML 40215 TML 40215C +1 5 VDC/1333 mA –1 5 VDC/1333 mA TML 40252 TML 40252C *5.0 VDC/5000 mA *1 2 VDC/1 250 mA TML 40254 TML 40254C *5.0 VDC/5000 mA *24 VDC/625 mA TML 4051 2 TML 4051 2C *5.0 VDC/5000 mA +1 2 VDC/600 mA –1 2 VDC/600 mA TML 40515 TML 40515C *5.0 VDC/5000 mA +1 5 VDC/500 mA –1 5 VDC/500 mA

40 Watt Models

  • Output floating

www.tracopower.com Page 3 of 5 AC/DC Power Modules TML Series 20 & 40 Watt Output Specifications Regulation – Load variation TML 20 single output models: 1 %, 0–100 % load TML 20 dual output models: 3 % (each output), 10–100 % symmetric load TML 20 triple output models: 2 % for output 1, 20–100 % load 5 % for output 2&3, 20–100 % symmetric load TML 40 single output models: 0.5 % 1–100 % load TML 40 symmetric dual output models: 1 % (each output), 10–100 % symmetric load TML 40 asymmetric dual output models: 2 % for output 1, 25–100 % load 6 % for output 2, 25–100 % load TML 40 triple output models: 3 % for output 1, 25–100 % load 7 % for output 2&3, 25–100 % symmetric load Current limitation above 105 % of rated output current Overvoltage protection (main output only) by Zener diode Short circuit protection hiccup mode, indefinite (automatic recovery) Overtemperature protection (TML 40 models only) at +100°C All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. General Specifications Temperature ranges – Operating TML 20 models: –25°C to +70°C TML 40 models: –40°C to +60°C – Power derating above +50°C TML 20 models: 3.75 %/K TML 40 models: 3.0 %/K – Case max. +95°C – Storage (non operating) –40°C to +85°C Temperature coefficient TML 20 models: 0.02 %/K TML 40 models: 0.01 %/K Efficiency 74 – 84 % (depending on model) Humidity (non condensing) 95 % rel max. Altitude during operation TML 20 models: 2‘000 m max. TML 40 models: 4‘000 m max. Switching frequency (pulse width modulation PWM) TML 20 models: 100 kHz typ. TML 40 models: 132 kHz typ. Hold-up time 10 ms min. Isolation voltage – Input/Output 3‘000 VAC Working voltage (rated) TML 20 models: 274 VAC TML 40 models: 283 VAC Reliability / calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >200’000 h Max. capacitive load Model series Output: TML 20 TML 40 Single output models

3.3 VDC 25‘000 µF 60‘000 µF

5.0 VDC 13‘000 µF 40‘000 µF

1 2 VDC 920 µF 8‘600 µF 1 5 VDC 820 µF 6‘600 µF

24 VDC 600 µF 1‘400 µF

Dual output models symetric +5.0 / –5.0 VDC 4‘300 / 4‘300 µF 1 2‘000 / 1 2‘000 µF +1 2 / –1 2 VDC 560 /560 µF 4‘400 / 4‘400 µF +1 5 / –1 5 VDC 220 /220 µF 1‘000 / 1‘000 µF Dual output models asymetric +5.0 / +1 2 VDC – 10‘000 / 470 µF +5.0 / +24 VDC – 10‘000 / 400 µF Triple output models +5.0 / +1 2 / –1 2 VDC 3‘500 / 220 / 220 µF 10‘000 / 780 / 780 µF +5.0 / +1 5 / –1 5VDC 3‘500 / 1 50 / 1 50 µF 10‘000 / 900 / 900 µF

www.tracopower.com Page 4 of 5 AC/DC Power Modules TML Series 20 & 40 Watt Outline Dimensions TML 20 models for PCB mount: Weight: 110 g (3.9 oz) Weight: 155 g (5.5 oz) Pin diameter ø 1.0 mm (0.039) Bottom view 3.75 62.0 69.5 8.511.5 11.5 47.5 20.0 8.5 23.75 20.0 (2.44) (2.74) (0.15) (0.79) (0.33)(0.45) (0.79) (0.33) (0.45) (1.87) (0.94) 21.7 8.0(0.85) (0.31) 5.0 86.0 96.0 (3.38) (3.78) (0.20) 46.0 (1.81) 54.6 (2.15) 4.0 (0.16) 4 x ø3.5 (4 x ø0.14) Top view 27.6 (1.09) 6.0 (0.23) TML 20C models for chassis mount: NC = Not connected Dimensions in[mm], () = Inches Tolerances = 0.5mm (0.020) Tolerances = 1.0mm (0.039) General Specifications EMI / RFI conducted EN 55032, class B, FCC part 15, level B EMC compliance EN 55024 & EN 55035 Protection class class II to IEC/EN 60536 Safety standards UL/ cUL 60950-1, IEC/EN 60950-1 UL/ cUL 62368-1, IEC/EN 62368-1 – Certification documents www.tracopower.com/ overview/tml Casing material plastic resin + fiberglass (UL 94V-0 rated) Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS Ro H S d i r e c t i ve 2011/6 5/E U Pinout / Connection Pin/ con. Single output Dual output Triple output 1 NC

2 AC in (N)

3 AC in (L)

4 no pin / NC no pin / NC Vout 3 5 –Vout 1 Vout 2 com. 2/3 6 no pin com. 1/2 Vout 2 7 +Vout 1 +Vout 1 –Vout 1 8 no pin no pin +Vout 1

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com 6.0 100.0 112.0 (3.94) (4.41) (0.24) 50.0 (1.97) 63.7 (2.50) 6.85 (0.23) 4 x ø4.3 (4 x ø0.17) Top view 32.5 (1.28) 6.5 (0.25) AC/DC Power Modules TML Series 20 & 40 Watt TML 40 models for PCB mount: TML 40C models for chassis mount: Weight : 280 g (9.9 oz)Pin diameter ø 1.2 mm (0.047) Weight : 325 g (11. 5 oz ) Dimensions in[mm], () = Inches Dimensions in[mm], () = Inches Tolerances = 0.5mm (0.020) Tolerances = 1.0mm (0.039) Rev. March 21, 2023 Outline Dimensions NC = Not connected Pinout / Connection Pin/ con. Single output Dual sym. output Dual asym. output Triple output 1 no pin / NC

2 AC in (L)

3 AC in (N)

4 +Vout 1 Vout 1 +Vout 2 Vout 2 5 no pin / NC no pin / NC +Vout 1 +Vout 1 6 –Vout 1 com. 1/2 –Vout 2 com. 2/3 7 no pin / NC no pin / NC –Vout 1 –Vout 1

8 NC Vout 2 no pin / NC Vout 3

4.1 81.3 89.5 12.7 64.1 15.24 32.05 55.88 (3.20) (3.52) (0.16) (0.50) (2.20) (0.60) (2.52) (1.26) 25.0 6.0(0.98) (0.24) 12.7 15.24 (0.50) (0.60)