TES5 TRACOPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

◆ Compact low profile SMD package ◆ Wide 2:1 input voltage range ◆ I/O isolation 1500VDC ◆ Operating temp. range –40°C to +85°C max. ◆ Short circuit protection ◆ Remote On/Off ◆ High accuracy of pin co-planarity ◆ Lead free design – RoHS compliant ◆ 3-years product warranty The TES-5 series is a new range of high performance 5W dc-dc converter modules in low profile SMD package with compact dimensions of only 33.4 x 20.6 x 10.2 mm. The 18 available models feature wide 2:1 input voltage range and tightly regulated output voltage. High efficiency allows operating temperatures up to 71°C at full load. Further features are built-in EMI-filter to meet EN 55022,class A and FCC, level A without additional components and remote On/Off control. The products are qua- lified for soldering in a high temperature lead-free reflow solder process. Typical applications for these converters are battery powered equipment, instrumentation, communication systems and industrial controls. Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TES 5-1210 3.3 VDC 1200 mA 76 % TES 5-1211 5 VDC 1000 mA 80 % TES 5-1212 12 VDC 420 mA 83 % TES 5-1213 9 – 18 VDC 15 VDC 335 mA 83 % TES 5-1221 (12 VDC nominal) ±5 VDC ±500 mA 80 % TES 5-1222 ±12 VDC ±210 mA 83 % TES 5-1223 ±15 VDC ±165 mA 83 % TES 5-2410 3.3 VDC 1200 mA 78 % TES 5-2411 5 VDC 1000 mA 82 % TES 5-2412 12 VDC 420 mA 85 % TES 5-2413 18 – 36 VDC 15 VDC 335 mA 85 % TES 5-2421 (24 VDC nominal) ±5 VDC ±500 mA 82 % TES 5-2422 ±12 VDC ±210 mA 85 % TES 5-2423 ±15 VDC ±165 mA 85 % TES 5-4810 3.3 VDC 1200 mA 78 % TES 5-4811 5 VDC 1000 mA 82 % TES 5-4812 12 VDC 420 mA 85 % TES 5-4813 36 – 75 VDC 15 VDC 335 mA 85 % TES 5-4821 (48 VDC nominal) ±5 VDC ±500 mA 82 % TES 5-4822 ±12 VDC ±210 mA 85 % TES 5-4823 ±15 VDC ±165 mA 85 % Models UL 60950-1

http://www.tracopower.com Page 2 of 3 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications Input current no load 12 Vin models 20 mA

24 Vin models 5 mA

48 Vin models 3 mA

Input current full load 12 Vin models 500 mA typ. 24 Vin models 250 mA typ. 48 Vin models 125 mA typ. Start-up voltage / 12 Vin models 8 VDC / 7 VDC typ. under voltage shut down 24 Vin models 16 VDC / 15 VDC typ. 48 Vin models 33 VDC / 31 VDC typ. Surge voltage (1 sec. max.) 12 Vin models 25 V max. 24 Vin models 50 V max. 48 Vin models 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, class A Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 0.3 % max. – Load variation 20 – 100 % single output models 1 % max. dual output models balanced load 2 % max. Ripple and noise (20 MHz Bandwidth) 85 mVpk-pk max. Temperature coefficient ±0.02 %/°C Output current limitation >1 15 % of Iout max., constant current Short circuit protection indefinite, automatic recovery Capacitive load single output models 680 µF max. dual output models 100 µF max. (each output) General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +100°C max. – Storage –40°C to +125°C Derating 3.5 %/K above 70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio. h Isolation voltage (60sec.) – Input/Output 1’500 VDC Isolation capacitance – Input/Output 650 pF typ. Isolation resistance – Input/Output (500 VDC) >1‘000 MOhm Switching frequency 260 kHz typ. Safety standards UL 60950-1 , IEC/EN 60950-1 Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU – Off idle current: 10 mA DC/DC Converters TES 5 Series 5 Watt

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com Physical Specifications Casing material non conductive plastic Weight 14 g (0.55oz) Moisture sensivity level (MSL) level 2 as per J-STD-020D.1 (to find at: www.jedec.org - free registration required) Outline Dimensions Pin Single Dual

1 Remote On/Off Remote On/Off

2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND)

9 NC Common

10 NC NC

11 NC –Vout

12 NC NC

13 NC NC

15 NC NC

16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc)

24 NC NC

Pin Patterns: DC/DC Converters TES 5 Series 5 Watt Rev. September 16, 2022 24 13 Seating PlaneS Detail A Detail A 22.6 (0.81) 25.6 10.2 33.4 2.7 (0.11) 15.24 (0.6) 0.15 (0.006)1.5 (0.06) 20.6 (1.31) (0.40) 0.4 (0.016) 2.54 (0.1) (0.89) (1.01) Top View 1.5 (0.06) 0.15 Dimensions in [mm], () = Inch Tolerances ±0.25 (±0.02) Pin pich tolerances ±0.13 (±0.005) NC = Not connected 1.7 (0.07)3.1 (0.12) 27.0 (1.06) 2.7 (0.11) 2 x 2.54 (2 x 0.1) 15.24 (0.6) 3 x 2.54 (3 x 0.1) Supporting documents: www.tracopower.com/overview/tes5