TES2N TRACOPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

◆ Low profile SMD-package ◆ Wide 2:1 input voltage range ◆ I/O isolation 1500 VDC ◆ Input filter meets EN55022, class A ◆ Operating temperature range –40°C to +85°C ◆ Short-circuit protection ◆ Qualified for leadfree reflow solder process according IPC J-STD-020D.1 ◆ Available in tape and reel package ◆ Bears washing process ◆ 3-year product warranty Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TES 2N-0510 3.3 VDC 500 mA 70 % TES 2N-0511 5 VDC 400 mA 73 % TES 2N-0512 4.5 – 9.0 VDC 12VDC 165 mA 75 % TES 2N-0513 (nominal 5 VDC) 15 VDC 135 mA 73 % TES 2N-0521 ± 5 VDC ±200 mA 64 % TES 2N-0522 ±12 VDC ±85 mA 69 % TES 2N-0523 ±15 VDC ±65 mA 71 % TES 2N-1210 3.3 VDC 500 mA 73 % TES 2N-1211 5 VDC 400 mA 77 % TES 2N-1212 9 – 18 VDC 12 VDC 165 mA 80 % TES 2N-1213 (nominal 12 VDC) 15 VDC 135 mA 80 % TES 2N-1221 ±5 VDC ±200 mA 73 % TES 2N-1222 ±12 VDC ±85 mA 78 % TES 2N-1223 ±15 VDC ±65 mA 78 % TES 2N-2410 3.3 VDC 500 mA 72 % TES 2N-2411 5 VDC 400 mA 77 % TES 2N-2412 18 – 36 VDC 12 VDC 165 mA 80 % TES 2N-2413 (nominal 24 VDC) 15 VDC 135 mA 81 % TES 2N-2421 ±5 VDC ±200 mA 74 % TES 2N-2422 ±12 VDC ±85 mA 78 % TES 2N-2423 ±15 VDC ±65 mA 80 % TES 2N-4810 3.3 VDC 500 mA 71 % TES 2N-4811 5 VDC 400 mA 73 % TES 2N-4812 36 – 75 VDC 12 VDC 165 mA 79 % TES 2N-4813 (nominal 48 VDC) 15 VDC 135 mA 79 % TES 2N-4821 ± 5 VDC ±200 mA 71 % TES 2N-4822 ±12 VDC ±85 mA 77 % TES 2N-4823 ±15 VDC ±65 mA 77 % Models The TES-2N series is a family of high performance 2W DC/DC converter modules featuring wide 2:1 input voltage ranges. The 28 models come in a low profile SMD package which requires just 3 cm 2 space on the PCB. A high efficiency allows an operating temperature range of –40°C to +85°C. A built-in EMI input filter complies with EN 55022, class A. Typical applications for these converters are battery ope - rated equipment, instrumentation, communication and industrial electronics, every- where where isolated, tightly regulated voltages are required. UL 60950-1 CB Scheme

http://www.tracopower.com Page 2 of 3 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. DC/DC Converters TES 2N Series 2 Watt Input Specifications Input current at full load (nominal input) 5 Vin models: 600 mA typ. 12 Vin models: 220 mA typ. 24 Vin models: 1 10 mA typ. 48 Vin models: 55 mA typ. Start-up voltage / under voltage shut down 5 Vin models: 4.5 VDC / 4.0 VDC typ. (or lower) 12 Vin models: 9.0 VDC / 8.5 VDC typ. (or lower) 24 Vin models: 18 VDC / 17 VDC typ. 48 Vin models: 36 VDC / 34 VDC typ. Surge voltage (100 msec. max.) 5 Vin models: 1 1 V max. 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Input fuse recommended, required for compliance with CB – recommended min. fuse rating 5 V models: 500 mA

12 V models: 200 mA

Voltage set accuracy ±2 % Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 25 – 100 % 0.75 % max. dual output models: 2.0 % (balanced load) Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max. Transient response (25 % load step change) – Recovery time 300 µs typ. – Deviation ±5 % Temperature coefficient ±0.02 %/K Short circuit protection indefinite, automatic recovery Minimum load 25 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Capacitive load 3.3 VDC output models: 2200 µF max. 5 VDC output models: 1000 µF max. 12 VDC output models: 170 µF max. 15 VDC output models: 1 10 µF max. ±5 VDC output models: 470 µF max. ±12 VDC output models: 100 µF max. ±15 VDC output models: 47 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperatures +90°C – Storage –50°C to +125°C Derating 3.5 %/K above +71°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF ( M IL- HDBK-217F, at +25°C, ground benign) >1.0 Mio h Isolation voltage (60sec.) – Input/Output 1500 VDC Isolation capacitance – Input/Output 250 pF Isolation resistance – Input/Output (500 VDC) >1000 M Ohm Switching frequency 300 kHz (PFM)

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com Page 3 of 3 Rev. September 16, 2022 DC/DC Converters TES 2N Series 2 Watt Outline Dimensions Pin Single Dual 1 –Vin (GND) –Vin (GND)

7 NC NC

8 NC Common

10 –Vout –Vout 16 +Vin +Vin Pin-Out General Specifications Safety approvals UL 60950-1, IEC/EN 60950-1 – Certification documents www.tracopower.com/overview/tes2n Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material DAP (UL94V-0 rated) Pin material Phosphor bronze Weight 5.1 g ( 0.17oz) Moisture sensivity level (MSL) level 2 as per J-STD-020D.1 (to find at: www.jedec.org - free registration required) Soldering temperature max. 260°C / 10 sec. 24.0 (0.94) 0.25 (0.01) 13.7 (0.54) top view 17 8 16 10 9 0 - 4° 0.15 1.0 (0.04) 10.6 (0.42) 9.4 (0.37) Ø1.5 (Ø 0.06) vent hole with membrane on bottom side (to allow proper washing process) 2.8 (0.11) 13.7 (0.54) 1.4 (0.055) min. 2.8 (0.11) Dimensions in [mm], () = Inch Tolerances ±0.25 (±0.01) Pin pitch tolerances ±0.05 (±0.002) NC = Not connected Solder Pad Dimension Supporting documents: www.tracopower.com/overview/tes2n