TES1V TRACOPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

DC/DC Converter TES 1V Series, 1 Watt

  • Small SMD package with standard footprint
  • I/O isolation voltage 3000 VDC
  • Unregulated device
  • Single- and dual output models
  • High efficiency up to 80%
  • Operating temperature range –40°C to +90°C
  • High accuracy of pin co-planarity
  • Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020E
  • Available in tape and reel package
  • 3-year product warranty The TES 1V series are miniature, 1W DC/DC-converters with high isolation in a SMD package. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. With the small footprint, these converters are the ideal solution for board level power distribution, mainly for applications in the industrial- and telecom field. For au- tomated SMD production lines the devices can be supplied in standard tape and reel package. Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. TES 1-0510V 4.5 - 5.5 VDC (5 VDC nom.)

3.3 VDC 260 mA 72 %

TES 1-0511V 5 VDC 200 mA 75 % TES 1-0512V 12 VDC 84 mA 79 % TES 1-0513V 15 VDC 67 mA 80 % TES 1-0521V +5 VDC 100 mA –5 VDC 100 mA 75 % TES 1-0522V +12 VDC 42 mA –12 VDC 42 mA 79 % TES 1-0523V +15 VDC 34 mA –15 VDC 34 mA 80 % TES 1-1210V 10.8 - 13.2 VDC (12 VDC nom.)

3.3 VDC 260 mA 73 %

TES 1-1211V 5 VDC 200 mA 76 % TES 1-1212V 12 VDC 84 mA 80 % TES 1-1213V 15 VDC 67 mA 81 % TES 1-1221V +5 VDC 100 mA –5 VDC 100 mA 76 % TES 1-1222V +12 VDC 42 mA –12 VDC 42 mA 80 % TES 1-1223V +15 VDC 34 mA –15 VDC 34 mA 80 % TES 1-2410V 21.6 - 26.4 VDC (24 VDC nom.)

3.3 VDC 260 mA 70 %

TES 1-2411V 5 VDC 200 mA 73 % TES 1-2412V 12 VDC 84 mA 79 % TES 1-2413V 15 VDC 67 mA 79 % TES 1-2421V +5 VDC 100 mA –5 VDC 100 mA 73 % TES 1-2422V +12 VDC 42 mA –12 VDC 42 mA 79 % TES 1-2423V +15 VDC 34 mA –15 VDC 34 mA 79 % www.tracopower.com November 30, 2022 Page 1 / 4

Input Current - At no load 5 Vin models: 30 mA typ. 12 Vin models: 15 mA typ. 24 Vin models: 8 mA typ. - At full load 5 Vin models: 260 mA max. 12 Vin models: 110 mA max. 24 Vin models: 55 mA max. Surge Voltage 5 Vin models: 9 VDC max. (1 s max.) 12 Vin models: 18 VDC max. (1 s max.) 24 Vin models: 30 VDC max. (1 s max.) Recommended Input Fuse (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Capacitor Input Specifications Voltage Set Accuracy ±3% max. (at 60% load, 3.3 & 5 Vout models) ±3% max. (at 100% load, other output models) Regulation - Input Variation (1% Vin step) single output models: 1.5% max. dual output models: 1.5% max. - Load Variation See application note: www.tracopower.com/overview/tes1v - Voltage Balance (symmetrical load) dual output models: 1% max. Ripple and Noise - 20 MHz Bandwidth 100 mVp-p max. Capacitive Load - single output 3.3 Vout models: 33 µF max. 5 Vout models: 33 µF max. 12 Vout models: 4.7 µF max. 15 Vout models: 4.7 µF max. - dual output 5 / -5 Vout models: 10 / 10 µF max. 12 / -12 Vout models: 2.2 / 2.2 µF max. 15 / -15 Vout models: 2.2 / 2.2 µF max. Minimum Load 2 % of Iout max. (Operation at lower load will not damage the converter, but it may not meet all specifications) Temperature Coefficient ±0.02 %/K max. Start-up Time 400 ms max. Short Circuit Protection Limited 0.5 s max., Automatic recovery Output Specifications EMI Emissions - Conducted Emissions EN 55032 class A (with external filter) - Radiated Emissions EN 55032 class A (with external filter) External filter proposal: www.tracopower.com/overview/tes1v EMC Specifications Relative Humidity 95% max. (non condensing) Temperature Ranges - Operating Temperature –40°C to +90°C - Case Temperature +105°C max. - Storage Temperature –50°C to +125°C Power Derating - High Temperature 3.3 %/K above 75°C See application note: www.tracopower.com/overview/tes1v Cooling System Natural convection (20 LFM) Switching Frequency 50 - 150 kHz (PFM) 100 kHz typ. (PFM) Insulation System Functional Insulation Isolation Test Voltage - Input to Output, 60 s 3'000 VDC Isolation Resistance - Input to Output, 500 VDC 10'000 MΩ min. General Specifications TES 1V Series, 1 Watt All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 2 / 4

Isolation Capacitance - Input to Output, 100 kHz, 1 V 60 pF typ. 100 pF max. Reliability - Calculated MTBF 2'000'000 h (MIL-HDBK-217F, ground benign) Moisture Sensitivity (MSL) Level 2 (J-STD-033C) Washing Process Not allowed (vent-hole without membrane) Housing Material Non-conductive Plastic (UL 94 V-0 rated) Pin Material Phosphor Bronze (C5191) Pin Foundation Plating Copper (1 - 3 µm) Pin Surface Plating Tin (7.5 µm min.), matte Housing Type Plastic Case Mounting Type PCB Mount Connection Type SMD (Surface-Mount Device) Footprint Type SMD12 Soldering Profile Reflow Soldering (J-STD-020E) Weight 2 g Environmental Compliance - REACH Declaration www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant - RoHS Declaration www.tracopower.com/info/rohs-declaration.pdf Exemptions: No Exemptions Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tes1v Outline Dimensions TES 1V Series, 1 Watt All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 3 / 4 Dimensions in mm (inch) Pin pitch tolerances: ±0.13 (±0.005) Other tolerances: ±0.25 (±0.01) 16.3 (0.64) 2.54 (0.1) 2.54 (0.1) 5.08 (0.2) 2.54 (0.1) 0.6 (0.02) 3.0 (0.12) 3.0 (0.12) 1 5 2 6 3 12 8 11 7 10 11.0 (0.43) 8.0 (0.31) Ø1.0 (Ø 0.04) vent hole (for reflow soldering process) 0.3 (0.01) 8.0 ±0.5 (0.31 ±0.02) 0-4° 0.1 1.5 (0.06) (0.004) 0.25 (0.01) R0.5 (R0.02) 5.5 (0.22) 1.8 (0.07) M Pinout Pin Single Dual 1 –Vin (GND) –Vin (GND) 2 +Vin (Vcc) +Vin (Vcc)

3 NTC NTC

5 –Vout Common

6 NTC –Vout

7 NTC NTC

10 NTC NTC

11 NTC NTC

12 NTC NTC

NTC: Not to connect

Recommended Solder Pad Layout TES 1V Series, 1 Watt Dimensions in mm (inch) 5.08 (0.2) 2.54 (0.1) 2.54 (0.1) 2.54 (0.1) 12.4 (0.49) 2.2 (0.09) 1.2 min. (0.05) © Copyright 2022 Traco Electronic AG Specification s can be changed without notice. www.tracopower.com Rev. November 30, 2022 Page 4 / 4