TEP150-7211UIR

TEP150UIR TRACOPOWER | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 5

Technical content

DC/DC Railway Converter TEP 150UIR Series, 150 Watt

• Compact half-brick housing
• Ultra-wide 12:1 input: 14–160 VDC
• –40°C to +105°C operating temperature
• Fully encapsulated
• Dedicated holdup capacitor connection
• EN 50155, EN 45545-2, and EN 61373 certifications
• Reinforced 3000VAC I/O isolation
• Remote on/off and trim function
• Protection against short-circuit (SCP), overvoltage (OVP), overtemperature (OTP)
• 3-year product warranty IEC 62368-1UL 62368-1 The TEP 150UIR is a series of railway-certified DC/DC converters designed for highest reliability in demanding applications. Its ultra-wide 12:1 input voltage range allows the application engineer to target an array of nominal system volt- ages with a single power supply design. Thanks to its dedicated holdup capaci- tor connection, the TEP 150UIR meets extended holdup-time requirements without the need for bulky input capacitors. The TEP 150UIR series is EN 50155 certified for applications on rolling stock. Additional certifications in- clude EN 61373 for mechanical shock and vibration, EN 45545-2 for fire be- havior and IEC/EN/UL 62368-1 for IT and general-purpose industrial applica- tions. Models Order Code Input Voltage Output Voltage Output Current Efficiency Range nom. (adjustable) max. typ. TEP 150-7211UIR 14 - 160 VDC (72 VDC nom.) 5 VDC (4.0 - 5.5 VDC) 30'000 mA 91 % TEP 150-7212UIR 12 VDC (9.6 - 13.2 VDC) 12'500 mA 93 % TEP 150-7213UIR 15 VDC (12.0 - 16.5 VDC) 10'000 mA 92 % TEP 150-7215UIR 24 VDC (19.2 - 26.4 VDC) 6'300 mA 89 % TEP 150-7218UIR 48 VDC (38.4 - 52.8 VDC) 3'200 mA 93 % Options TEP-HS6 - Optional Heat Sink: www.tracopower.com/products/tep-hs6.pdf TEP-HS7 - Optional Heat Sink: www.tracopower.com/products/tep-hs7.pdf on demand (backorder with MOQ non stocking item) - Optional model with 28 VDC / 5'400 mA Output and 14 - 160 VDC Input - Optional model with 53 VDC / 2'900 mA Output and 14 - 160 VDC Input - Optional models with Remote On/Off function with inverse logic Note - A capacitor 150 µF / 200 V must be connected between BUS pin and -Vin www.tracopower.com January 23, 2023 Page 1 / 5

Input Current - At no load 25 mA typ. - At full load 2'300 mA typ. Surge Voltage 185 VDC max. (1 s max.) Under Voltage Lockout 10 VDC min. / 11 VDC typ. / 12 VDC max. (Adjustable w/ external resistor; see application note) Recommended Input Fuse 15 A (fast acting) (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Capacitor Input Specifications Output Voltage Adjustment –20% to +10% (By external trim resistor) See application note: www.tracopower.com/overview/tep150uir Output power must not exceed rated power! Voltage Set Accuracy ±1% max. Regulation - Input Variation (Vmin - Vmax) 0.2% max. - Load Variation (0 - 100%) 0.1% max. Ripple and Noise (20 MHz Bandwidth) 5 Vout models: 75 mVp-p typ. (w/ 22 µF/25 V 7R MLCC // 22 µF/25 V POSCAP) 12 Vout models: 150 mVp-p typ. (w/ 22 µF/25 V 7R MLCC // 22 µF/25 V POSCAP) 15 Vout models: 150 mVp-p typ. (w/ 22 µF/25 V 7R MLCC // 22 µF/25 V POSCAP) 24 Vout models: 200 mVp-p typ. (w/ 2.2 µF/50 V X7R MLCC) 28 Vout models: 200 mVp-p typ. (w/ 2.2 µF/50 V X7R MLCC) 48 Vout models: 300 mVp-p typ. (w/ 1 µF/100 V X7R MLCC) 53 Vout models: 300 mVp-p typ. (w/ 1 µF/100 V X7R MLCC) Capacitive Load 5 Vout models: 45'000 µF max. 12 Vout models: 8'000 µF max. 15 Vout models: 5'000 µF max. 24 Vout models: 2'000 µF max. 28 Vout models: 1'470 µF max. 48 Vout models: 470 µF max. 53 Vout models: 390 µF max. Minimum Load Not required Temperature Coefficient ±0.02 %/K max. Start-up Time 350 ms typ. Short Circuit Protection Continuous, Automatic recovery Output Current Limitation 120 - 150% of Iout max. Overvoltage Protection 115 - 130% of Vout nom. Transient Response - Response Time 250 µs typ. (25% Load Step) Output Specifications Safety Standards - IT / Multimedia Equipment EN 62368-1 IEC 62368-1 UL 62368-1 - Railway Applications EN 50155 - Certification Documents www.tracopower.com/overview/tep150uir Pollution Degree PD 2 Over Voltage Category Not mains connected Safety Specifications TEP 150UIR Series, 150 Watt All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com January 23, 2023 Page 2 / 5

EMI Emissions EN 50121-3-2 (EMC for Rolling Stock) - Conducted Emissions EN 55032 class A (with external filter) EN 55032 class B (with external filter) - Radiated Emissions EN 55032 class A (with external filter) EN 55032 class B (with external filter) External filter proposal: www.tracopower.com/overview/tep150uir EMS Immunity EN 50155 (Railway Applications) EN 50121-3-2 (EMC for Rolling Stock) EN 55024 (IT Equipment) - Electrostatic Discharge Air: EN 61000-4-2, ±8 kV, perf. criteria A Contact: EN 61000-4-2, ±6 kV, perf. criteria A - RF Electromagnetic Field EN 61000-4-3, 20 V/m, perf. criteria A - EFT (Burst) / Surge EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV, perf. criteria A External filter proposal: www.tracopower.com/overview/tep150uir - Conducted RF Disturbances EN 61000-4-6, 10 Vrms, perf. criteria A - PF Magnetic Field Continuous: EN 61000-4-8, 100 A/m, perf. criteria A 1 s: EN 61000-4-8, 1000 A/m, perf. criteria A EMC Specifications Relative Humidity 95% max. (non condensing) Temperature Ranges - Operating Temperature –40°C to +50°C –40°C to +75°C (with Heat Sink) - Case Temperature +105°C max. - Storage Temperature –55°C to +125°C Power Derating - High Temperature Depending on model Depending on model (with Heat Sink) See application note: www.tracopower.com/overview/tep150uir Over Temperature Protection Switch Off - Protection Mode 115°C typ. (Automatic recovery at 100°C typ.) - Measurement Point Base-Plate Cooling System Natural convection (20 LFM) Sense Function 10% max. of Vout nom. Remote Control - Voltage Controlled Remote On: 3.0 to 12 VDC or open circuit Off: 0 to 1.2 VDC or short circuit Refers to 'Remote' and '-Vin' Pin - Off Idle Input Current 15 mA typ. - Remote Pin Input Current -0.5 to 1.0 mA Altitude During Operation 5'000 m max. Switching Frequency 189 - 231 kHz (PWM) 210 kHz typ. (PWM) Insulation System Reinforced Insulation Working Voltage (rated) 166 VAC Isolation Test Voltage - Input to Output, 60 s 3'000 VAC - Input to Case, 60 s 1'500 VAC (where case is the baseplate) - Output to Case, 60 s 1'500 VAC (where case is the baseplate) Isolation Resistance - Input to Output, 500 VDC 1'000 MΩ min. Isolation Capacitance - Input to Output, 100 kHz, 1 V 1'000 pF typ. Distance Through Isolation 0.4 mm Reliability - Calculated MTBF 309'300 h (MIL-HDBK-217F, ground benign) Washing Process Allowed (hermetical product) See Cleaning Guideline: www.tracopower.com/info/cleaning.pdf General Specifications TEP 150UIR Series, 150 Watt All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com January 23, 2023 Page 3 / 5

Environment - Vibration MIL-STD-810F EN 61373 7.6 g, 3 axis, 60 min, 20-2000 Hz 7.7 g, 3 axis, random waveform, 60 min - Mechanical Shock MIL-STD-810F EN 61373 50 g, 3 axis, terminal peak sawtooth, 11 ms - Thermal Shock MIL-STD-810F -55°C to +125°C, 72 cycles, 30 min each EN 50155 Housing Material Alu base-plate w. plastic case Isolation Frame Material Non-conductive Plastic (UL 94 V-0 rated) Potting Material Silicone (UL 94 V-0 rated) Pin Material Tinned Copper Pin Foundation Plating Nickel (3 - 5 µm) Pin Surface Plating Tin (5 - 7 µm), matte Housing Type Plastic Case Mounting Type PCB Mount Connection Type THD (Through-Hole Device) Footprint Type Half-Brick Soldering Profile Wave Soldering 260°C / 4 s max. Weight 113 g Thermal Impedance - Case to Ambient 6.1 K/W typ. (without heatsink)

4.6 K/W (with heatsink TEP-HS6)

3.7 K/W (with heatsink TEP-HS7)

Environmental Compliance - REACH Declaration www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant - RoHS Declaration www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule). The SCIP number is provided on request.) - Flammability (EN 45545-2) www.tracopower.com/info/en45545-declaration.pdf Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tep150uir TEP 150UIR Series, 150 Watt All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com January 23, 2023 Page 4 / 5

TEP 150UIR Series, 150 Watt Dimensions in mm (inch) Tolerances: x.x ±0.50 (x.xx ±0.02) x .xx ±0.25 (x.xxx ±0.010) Pin dimension tolerance: ±0.10 (±0.004) Screw lock torque: Max. 0.34 Nm (3.5 kgfcm) 4-M3X0.5 12101134 9 8 7 6 5 48.26 (1.900) 13.0 (0.51) 3.8 (0.15) 10.16 (0.400) 17.78 (0.700) 21.59 (0.850) 25.40 (1.000) 35.56 (1.400) 61.0 (2.40) Pinout Pin Function Pin Diameter 2 Bus 1.0 (0.04) 3 Remote On/Off (Ctrl) 1.0 (0.04) 4 +Vin (Vcc) 1.0 (0.04) 5 out 2.0 (0.08) 6 ense 1.0 (0.04) 7 Trim 1.0 (0.04) 8 +Sense 1.0 (0.04) 9 +Vout 2.0 (0.08) 10 UVLO 1.0 (0.04) 11 Pulse Out 1.0 (0.04) Important: A capacitor 150 µF / 200 V must be connected between BUS pin and Vin. For more details regarding BUS Pin, Under Voltage Lockout (UVLO) and Pulse Out see application notes on www.tracopower.com . © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. January 23, 2023 Page 5 / 5