TEN5 TRACOPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

u Wide 2:1 input range u Full SMD-design u High efficiency up to 86% u Extended operating temperature range –40°C to 85°C u I/O isolation 1’500 VDC u Indefinite short circuit protection u Input filter to meet EN 55022, class A and FCC, level A without external components u Shielded metal case with insulated baseplate u 24-pin DIP with industry standard pinout u High reliability, MTBF >1 Mio. h u 3-year product warranty DC/DC Converters TEN 5 Series, 6 Watt The TEN 5 Series is a range of DC/DC-converter modules with wide input range of 2:1. State of the art SMD-technology guarantees a product with very high reliability and good cost /performance ratio. I/O-isolation of 1’500 VDC together with con - ducted noise compliance to EN 55022-A and FCC level A makes these converters ideal for a wide range of applications in communications, mobile battery powered equipments and industrial systems. Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 5-0510 3.3 VDC 1 200 mA 75 % TEN 5-051 1 5 VDC 1000 mA 79 % TEN 5-051 2 1 2 VDC 500 mA 82 % TEN 5-0513 4.5 – 7 VDC 1 5 VDC 400 mA 82 % TEN 5-0521 (5 VDC nominal) ±5 VDC ±500 mA 79 % TEN 5-0522 ±1 2 VDC ±250 mA 82 % TEN 5-0523 ±1 5 VDC ±200 mA 82 % TEN 5-1 210 3.3 VDC 1 200 mA 77 % TEN 5-1 21 1 5 VDC 1000 mA 81 % TEN 5-1 21 2 1 2 VDC 500 mA 84 % TEN 5-1 213 9 – 1 8 VDC 1 5 VDC 400 mA 84 % TEN 5-1 221 (1 2 VDC nominal) ±5 VDC ±500 mA 81 % TEN 5-1 222 ±1 2 VDC ±250 mA 84 % TEN 5-1 223 ±1 5 VDC ±200 mA 84 % TEN 5-2410 3.3 VDC 1 200 mA 79 % TEN 5-241 1 5 VDC 1000 mA 83 % TEN 5-241 2 1 2 VDC 500 mA 86 % TEN 5-2413 1 8 – 36 VDC 1 5 VDC 400 mA 86 % TEN 5-2421 (24 VDC nominal) ±5 VDC ±500 mA 83 % TEN 5-2422 ±1 2 VDC ±250 mA 86 % TEN 5-2423 ±1 5 VDC ±200 mA 86 % TEN 5-4810 3.3 VDC 1 200 mA 79 % TEN 5-481 1 5 VDC 1000 mA 83 % TEN 5-481 2 1 2 VDC 500 mA 86 % TEN 5-4813 36 – 75 VDC 1 5 VDC 400 mA 86 % TEN 5-4821 (48 VDC nominal) ±5 VDC ±500 mA 83 % TEN 5-4822 ±1 2 VDC ±250 mA 86 % TEN 5-4823 ±1 5 VDC ±200 mA 86 % Models UL 60950-1

http:/ /www.tracopower.com Page 2 of 3 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications Input current no load 5 Vin models: 80 mA typ. 12 Vin models: 30 mA typ. 24 Vin models: 15 mA typ. 48 Vin models: 8 mA typ. Start-up voltage / 5 Vin models: 4.4 VDC / 4.0 VDC (or lower) under voltage shut down 12 Vin models: 8.0 VDC / 8.0 VDC (or lower) 24 Vin models: 16.0 VDC / 16.0 VDC (or lower) 48 Vin models: 32.0 VDC / 32.0 VDC (or lower) long term operation at undervoltage will damage the converter! Surge voltage (1 sec. max.) 5 Vin models: 10 V max. 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 class A, FCC part 15, level A Output Specifications Voltage set accuracy 1.0 % Regulation – Input variation Vin min. to Vin max. 0.3 % max. – Load variation 20 – 100 % single output models : 1.0 % max. dual output models balanced load: 2.0 % max. dual output models unbalanced load: 5.0 % max. (25 % / 100 %) Minimum load 5 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk typ., 75 mVpk-pk max. Temperature coefficient ±0.02 %/K Output current limitation >120 % of Iout max., foldback Short-circuit protection indefinite (automatic recovery) Start up time (nominal Vin and constant resistive load) 10 ms typ. (for power on and remote on) Capacitive load single output models : 6800 µF max. dual output models: 1000 µF max. (each output) General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +90°C max. – Storage –50°C to +125°C Derating 3.3 %/K above 70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio. h Isolation voltage (60 sec.) – Input/Output 1’500 VDC Isolation capacitance – Input/Output 380 pF typ. Isolation resistance – Input/Output >1‘000 M Ohm (500 VDC) Switching frequency 300 kHz typ. (Pulse frequency modulation PFM) Safety standards UL 60950-1, IEC/EN 60950-1 Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf – RoHS directive 201 1/65/EU DC/DC Converters TEN 5 Series 6 Watt

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com DC/DC Converters TEN 5 Series 6 Watt Outline Dimensions Physical Specifications Casing material steel, metal Baseplate material non conductive FR4 Potting material Silicone (UL 94 V-0 rated) Weight 16.9 g (0.59 oz) Soldering temperature max. 260°C / 10 sec. 20.3 4.5 31.8 10.2 4.1 15.22 Ø0.5 (Ø0.02) 23 2 Bottom view 2.5415.24 2.54 5.08 (0.599) (0.80) (0.100) (0.40) (0.16) (1.25) (0.18) Pin Single Dual 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND)

9 No pin Common

11 NC –Vout

16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) Pin-Out Rev. February 20, 2023 Dimensions in mm (inch) Tolerances: x.x ±0.25 (x.xx ±0.01) x.xx ±0.13 (x.xxx ±0.005) Pin diameter tolerances: x.x ±0.05 (x.xx ±0.002) NC = Not connected Supporting documents: www.tracopower.com/ overview/ten5