TEN4 TRACOPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

u Ultra-wide 4:1 input range 9 – 36 VDC or 18 – 75 VDC u Full SMD design u High efficiency up to 85 % u Indefinite short circuit protection u I/O isolation 1‘500 VDC u Input filter meets EN 55022, Class A and FCC, Level A without external components u Shielded metal case with insulated baseplate u 24-pin DIP with industry standard pinout u MTTF >1 Mio. h u 3-year product warranty The TEN 4 series DC/DC converter is designed for applications requiring very wide operating voltage range. Typical applications are tele-and data communication systems, mobile battery powered equipments and industrial process control systems with operation from different input voltages i.e. 12/24 VDC or 24/ 48 VDC batte - ry voltages. High efficiency allows operation up to +75°C at full load. Input filtering according to EN 55022-A and FCC, level A. Low output ripple minisme design-in time and cost. Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 4-2410 3.3 VDC 900 mA 77 % TEN 4-241 1 5 VDC 660 mA 81 % TEN 4-241 2 1 2 VDC 330 mA 83 % TEN 4-2413 9 – 36 VDC 1 5 VDC 265 mA 83 % TEN 4-2421 (24 VDC nominal) ±5 VDC ±300 mA 80 % TEN 4-2422 ±1 2 VDC ±1 65 mA 83 % TEN 4-2423 ±1 5 VDC ±130 mA 83 % TEN 4-4810 3.3 VDC 900 mA 78 % TEN 4-481 1 5 VDC 660 mA 82 % TEN 4-481 2 1 2 VDC 330 mA 85 % TEN 4-4813 1 8 – 75 VDC 1 5 VDC 265 mA 85 % TEN 4-4821 (48 VDC nominal) ±5 VDC ±300 mA 82 % TEN 4-4822 ±1 2 VDC ±1 65 mA 85 % TEN 4-4823 ±1 5 VDC ±130 mA 85 % Models not recommended for new designs

http:/ /www.tracopower.com Page 2 of 3 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. DC/DC Converters TEN 4 Series 4 Watt Input Specifications Input current no load / full load 24 Vin models 20 mA typ. / 400 mA typ. (at 12 VDC Vin) 20 mA typ. / 200 mA typ. (at 24 VDC Vin) 48 Vin models 6 mA typ. / 200 mA typ. (at 24 VDC Vin) 6 mA typ. / 100 mA typ. (at 48 VDC Vin) Start-up voltage / 24 Vin models 8.5 VDC / 8.0 VDC typ. under voltage shut down 48 Vin models 17 VDC / 16 VDC typ. Surge voltage (1 sec. max.) 24 Vin models 50 V max. 48 Vin models 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ±1.0 % Regulation – Input variation Vin min. to Vin max. 0.3 % max. – Load variation 10 – 100 % single output models 1.0 % max. dual output models 1.0 % max. balanced load 3.0 % max. unbalanced load Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max. Temperature coefficient ±0.02 %/K Current limitation >110 % of Iout max., constant current Short circuit protection Hiccup mode, indefinite (automatic recovery) Capacitive load – Single output models 3000 µF max. – Dual output models 680 µF max. General Specifications Temperature ranges – Operating –40°C to +75°C – Casing temperature +95°C max. – Storage –40°C to +125°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTTF (MIL-HDBK-217F @ +25°C, ground benign) >1 Mio. h Isolation voltage (60 sec.) – Input/Output 1’500 VDC Isolation capacity – Input/Output 380 pF typ. Isolation resistance – Input/Output (500 VDC) >1‘000 M Ohm Switching frequency 350 kHz typ. (Pulse frequency modulation PFM) Safety standards UL 1950 , IEC/EN 60950 Compliance up to 60 VDC input voltage (SELV limit) Safety approvals – UL/cUL www.ul.com > UL File no.: E188913

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com DC/DC Converters TEN 4 Series 4 Watt Physical Specifications Casing material Steel chrome-nickel plated Baseplate material Epoxy Potting material Epoxy (UL 94 V-0 rated) Weight 16.2 g (0.57 oz) Soldering temperature max. 265°C / 10 sec. Outline Dimensions 4.5 22.86 (0.9) 2.54 (0.100) 31.8 (1.25) 10.2 15.22 (0.599) 23 2 Bottom view 15.24 (0.600) 5.08 2.54 (0.100) Ø0.5 (Ø0.02) 4.1 (0.40) (0.16) (0.18) (0.200) 20.3 (0.80) Pin Single Dual 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND)

9 No pin Common

11 NC –Vout

16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) Pin-Out Rev. February 20, 2023 Dimensions in mm (inch) Tolerances: x.x ±0.25 (x.xx ±0.01) x.xx ±0.13 (x.xxx ±0.005) Pin diameter tolerances: x.x ±0.5 (x.xx ±0.002) NC = Not connected