TEN3 TRACOPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
u Wide 2 : 1 input range u High efficiency up to 84% u Full SMD-design u Short circuit protection u Extended operating temperature range –40°C to 85°C u I/O isolation 1’500 VDC u Input filter to meet EN 55022, Class A and FCC, level A without external components u 24-pin DIP with industry standard pinout u High reliability, MTBF >1.1 Mio. h u 3-year product warranty UL 60950-1
http:/ /www.tracopower.com Page 2 of 3 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications Input current no load / full load 5 Vin models 40 mA / 800 mA typ. 12 Vin models 20 mA / 300 mA typ. 24 Vin models 5 mA / 150 mA typ. 48 Vin models 3 mA / 75 mA typ. Start-up voltage / 5 Vin models 4 VDC / 3.5 VDC typ. under voltage shut down 12 Vin models 7 VDC / 6.5 VDC typ. 24 Vin models 12 VDC / 11 VDC typ.
48 Vin models 24 VDC / 22 VDC typ
Surge voltage (1 sec. max.) 5 Vin models 11 V max. 12 Vin models 25 V max. 24 Vin models 50 V max. 48 Vin models 100 V max. Conducted noise (input) (5 V input models excluded) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 10 – 100 % single output models 0.5 % max. dual output models balanced load 1.0 % max. dual output models unbalanced load 2.0 % max. Ripple and noise (20 MHz Bandwidth) 60 mVpk-pk max Transiente response – Recovery time 500 μs max. (25% load step change) – Deviation 5 % max. Temperature coefficient ±0.02 %/K Current limitation >110 % of Iout max., constant current Short circuit protection indefinite, automatic recovery Capacitive load single output models 4000 μF max. dual output models 1000 μF max. (each output) General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +100°C max. – Storage –55°C to +125°C Derating 3 %/K above 70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 F, at +25°C, ground benign) >1.1 Mio. h Isolation voltage (60 sec.) – Input/Output 1’500 VDC Isolation capacitance – Input/Output 65 pF typ Isolation resistance – Input/Output (500 VDC) >1‘000 M Ohm Switching frequency 300 kHz typ. (Pulse frequency modulation PFM) Safety standards cUL/UL 60950-1, IEC/EN 60950-1 Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf – RoHS directive 201 1/65/EU DC/DC Converters TEN 3 Series 3 Watt
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com Physical Specifications Casing material non conductive FR4 Potting material epoxy (UL 94V-0 rated) Weight 12.4 g (0.44 oz) Soldering temperature max. 265°C / 10 sec. Outline Dimensions (0.18) 4.5 22.86 (0.9) 20.3 (0.80) 2.54 31.8 (1.25) 10.2 (0.40) 15.22 (0.599) Ø0.5 (Ø0.02) 91 1 2223 16 14 Bottom view 15.24 (0.600) 5.08 2.54 (0.100) (0.18 ) (0.100) (0.200) 4.5 Dimensions in [mm], () = Inch Tolerances: x.x ±0.25 (x.xx ±0.01) x.xx ± 0.13 (x.xxx ±0.005) Pin diameter tolerances: x.x ±0.5 (x.xx ±0.002) NC = Not connected Pin Single Dual 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND)
9 No pin Common
11 NC –Vout
16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) Pin-Out DC/DC Converters TEN 3 Series 3 Watt Rev. February 20, 2023