TEN25 TRACOPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

◆ Wide 2:1 input range ◆ Very high efficiency up to 89% ◆ Extended operating temperature range –40°C to +85°C ◆ Adjustable output voltage ◆ Remote On/Off ◆ Continuous short circuit protection ◆ Over voltage protection ◆ I/O isolation 1500 VDC ◆ Input filter meets EN 55022, Class A and FCC, Level A without external components ◆ Lead free design - RoHS compliant ◆ 3-year product warranty DC/DC Converters TEN 25 Series, 25/30 Watt The TEN 25 series is a range of isolated DC/DC converters with high power density in a 51x41x9.5mm shielded metal case. All 18 models have a wide 2:1 input volt- age range. The very high efficiency allows a safe operating temperature range of –40°C to +85°C. Other features are internal EMI-filter to meet EN55022, class A and remote On/Off. Typical applications for these converter modules are industrial electronics, communication systems, battery operated equipment and distributed power systems. Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 25-1210 3.3 VDC 5’500 mA 81 % TEN 25-1211 5 VDC 5‘000 mA 84 % TEN 25-1212 9 – 18 VDC 12 VDC 2‘500 mA 88 % TEN 25-1213 (12 VDC nominal) 15 VDC 2‘000 mA 88 % TEN 25-1222 ±12 VDC ±1‘250 mA 88 % TEN 25-1223 ±15 VDC ±1‘000 mA 88 % TEN 25-2410 3.3 VDC 5’500 mA 82 % TEN 25-2411 5 VDC 5‘000 mA 85 % TEN 25-2412 18 – 36 VDC 12 VDC 2‘500 mA 89 % TEN 25-2413 (24 VDC nominal) 15 VDC 2‘000 mA 89 % TEN 25-2422 ±12 VDC ±1‘250 mA 89 % TEN 25-2423 ±15 VDC ±1‘000 mA 89 % TEN 25-4810 3,3 VDC 5’500 mA 82 % TEN 25-4811 5 VDC 5‘000 mA 85 % TEN 25-4812 36 – 75 VDC 12 VDC 2‘500 mA 89 % TEN 25-4813 (48 VDC nominal) 15 VDC 2‘000 mA 89 % TEN 25-4822 ±12 VDC ±1‘250 mA 89 % TEN 25-4823 ±15 VDC ±1‘000 mA 89 % Models not recommended for new design in

http://www.tracopower.com Page 2 of 3 Input Specifications Input current no load 12 Vin models: 40 mA max. 24 Vin models: 20 mA max. 48 Vin models: 10 mA max. Input current (full load) 12 Vin; 3.3/ 5 VDC models: 1870 mA typ. / 2480 mA typ. 12 Vin; other output models: 2840 mA typ. 24 Vin; 3.3/ 5 VDC models: 920 mA typ. / 1220 mA typ. 24 Vin; other output models: 1400 mA typ. 48 Vin; 3.3/ 5 VDC models: 460 mA typ. / 610 mA typ. 48 Vin; other output models: 700 mA typ. Start-up voltage / under voltage shut down 12 Vin models: 8.8 VDC / 8.3 VDC typ. 24 Vin models: 17 .5 VDC / 16.5 VDC typ. 48 Vin models: 35.0 VDC / 33.0 VDC typ. Surge voltage 12 Vin models: 25 V max. (1000 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 class A, FCC part 15, level A Output Specifications Voltage set accuracy ±1 % Output voltage adj. range ±10 % Regulation – Input variation Vin min. to Vin max. 0.3 % max. – Load variation 10 – 100 % single output models 0.5 % max dual output models balanced load 1.0 % max. dual output models unbalanced load 2.0 % max. Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max. Temperature coefficient ±0.02 %/K Output current limitation >1 10 % of Iout max., constant current Short circuit protection indefinite, automatic recovery Capacitive load single output models: 470 µF dual output models: 220 µF (for each output) General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +105°C max. – Storage –55°C to +125°C Load derating – without heatsink 2.2 %/K above +60°C – with heatsink 3.3 %/K above +70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >550’000 h Isolation voltage (60 sec.) – Input/Output 1‘500 VDC Isolation capacitance – Input/Output 1200 pF typ. Isolation resistance – Input/Output (500 VDC) >1’000 MOhm Switching frequency (fixed) 330 kHz typ. (puls width modulation) – Off: 0...1.2 VDC or short circuit pin 3 and pin 2 – Standby current: 5 mA max. Safety approvals UL /cUL 60950, IEC/EN 60950 compliance up to 60 VDC input voltage (SELV limit) DC/DC Converters TEN 25 Series, 25/30 Watt All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com DC/DC Converters TEN 25 Series, 25/30 Watt Physical Specifications Casing material copper, nickel plated Baseplate non conductive FR4 Potting material silicon rubber (UL 94 V-0 rated) Weight 48 g (1.69 oz) Soldering temperature max. 265°C / 10 sec. Thermal Impedance 12.5 K/W typ. 10.2 K/W typ. (with Heatsink) Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Outline Dimensions Rev. August 30, 2022 Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.04 ±0.002) Pin pitch tolerances: ±0.25 (±0.01) Case tolerances: ±0.5 (±0.02) Output Voltage Adjustments 10K Pot. –Vout Trim +Vout Trim +Vout Trim Rx Rx Rx = Vn -- Vo 36.667 x Vo -- 33 x Vn Rx = Vo -- Vn 33 x Vn -- 30 x Vo Vo = adjusted output voltage [VDC] Vn = nominal output voltage [VDC] Rx = trim resistor [Kohm] –Vout Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND)

3 Remote On/Off

4 No pin +Vout

6 –Vout –Vout

7 Trim

6 9.5 40.6 10.16 5.08 50.8 Bottom view 45.72 (2.0)(0.24) (1.6) (0.4) (0.38) (0.4) (0.4) (0.2) (1.8) 12.7 (0.5) 5.1 (0.2) 10.16 10.16 10.16 (0.4) 2.5 (0.1) Nominal output voltage at open Trim input. Supporting documents: www.tracopower.com/overview/ten25 Optional heat-sink see: www.tracopower.com/products/ten-hs5.pdf