TEN20 TRACOPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

u Wide 2:1 input range u High efficiency up to 89 % u Extended operating temperature range –40°C to +85°C u Indefinite short circuit protection u I/O isolation 1500VDC u Remote On/Off u Input filter meets EN 55022, Class A and FCC, level A without external components u Industry standard pinout u Shielded metal case with insulated baseplate u 3-year product warranty DC/DC Converters TEN 20 Series, 20 Watt The TEN 20 series of DC/DC converters, comprising 18 different models, has been de - signed for a wide range of applications including communications, industrial systems and battery powered equipments. Full SMD-design with use of ceramic chip capaci - tors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and an extended tempe - rature range of –40°C to +85°C. Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 20-1 210 3,3 VDC 4’000 mA 81 % TEN 20-1 21 1 5 VDC 4‘000 mA 84 % TEN 20-1 21 2 9 – 1 8 VDC 1 2 VDC 1’670 mA 88 % TEN 20-1 213 (1 2 VDC nominal) 1 5 VDC 1‘340 mA 88 % TEN 20-1 222 ±1 2 VDC ±835 mA 88 % TEN 20-1 223 ±1 5 VDC ±670 mA 88 % TEN 20-2410 3,3 VDC 4’000 mA 82 % TEN 20-241 1 5 VDC 4‘000 mA 85 % TEN 20-241 2 1 8 – 36 VDC 1 2 VDC 1‘670 mA 89 % TEN 20-2413 (24 VDC nominal) 1 5 VDC 1‘340 mA 89 % TEN 20-2422 ±1 2 VDC ±835 mA 89 % TEN 20-2423 ±1 5 VDC ±670 mA 89 % TEN 20-4810 3,3 VDC 4‘000 mA 82 % TEN 20-481 1 5 VDC 4‘000 mA 85 % TEN 20-481 2 36 – 75 VDC 1 2 VDC 1‘670 mA 89 % TEN 20-4813 (48 VDC nominal) 1 5 VDC 1‘340 mA 89 % TEN 20-4822 ±1 2 VDC ±835 mA 89 % TEN 20-4823 ±1 5 VDC ±670 mA 89 % Models UL 60950-1

http:/ /www.tracopower.com Page 2 of 3 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications Input current no load 12 Vin models: 30 mA typ. 24 Vin models: 17 mA typ. 48 Vin models: 10 mA typ. Surge voltage 12 Vin models: 25 V max. (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 Class A, FCC part 15, level A Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 0.3 % max. – Load variation 10 – 100 % 0.5 % max. 1.0 % max. for 3.3 VDC output models Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max. Temperature coefficient ±0.02 %/K Output current limitation 110–160 % of Iout max., constand current Short circuit protection indefinite (automatic recovery) Minimum load 10 % of rated max. current (operation at lower load condition is safe but output ripple will increase) Capacitive load 3.3 / 5 VDC models: 6‘800 µF max. 12 / 15 VDC models: 680 µF max. ±12 / ±15 VDC models: 270 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +105°C max. – Storage –55°C to +125°C Load derating – without heatsink 2.3 %/K above 60°C – with heatsink 2.9 %/K above 70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio h Isolation voltage (60 sec.) – Input/Output 1‘500 VDC Isolation capacitance – Input/Output 1‘200 pF typ. Isolation resistance – Input/Output (500 VDC) >1’000 MOhm Switching frequency (fixed) 330 kHz typ. (pulse width modulation PWM) – Off: –1 ... 1.0 VDC or short circuit pin 2 and pin 6 – Off standby input current: 5 mA max. – Control common: referenced to negativ input – Start-up delay: 15 ms Safety approvals UL 60950-1, IEC/EN 60950-1 Compliance up UL 62368-1 to 60 VDC input voltage (SELV limit) – Certification documents www.tracopower.com/overview/ten20 DC/DC Converters TEN 20 Series 20 Watt

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com DC/DC Converters TEN 20 Series 20 Watt Physical Specifications Casing material copper, nickel plated Baseplate material non conductive FR4 Potting material silicon rubber TSE (UL 94V-0 rated) Weight 30 g (1.05 oz) Soldering temperature max. 260°C / 10 sec. Thermal Impedance 13.2 K/W typ. 11.0 K/W typ. (with Heatsink) Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf – RoHS Ro H S d i r e c t i ve 2011/6 5/E U Outline Dimensions 50.8 (2.00) Insulated baseplate Bottom View 25.4 (1.00) Ø1.0 (Ø0.04) 10.16 (0.400) 10.16 (0.400) 7.62 (0.300) 7.62 (0.300) 2.54 (0.100) 5.08 (0.200) 20.32 (0.800) 15.2 (0.60) 10.2 (0.40) 6.0 (0.24) Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 +Vout +Vout

4 No pin Common

5 –Vout –Vout

6 Remote On/Off

Rev. March 17 , 2022 Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.02 ±0.002) Pin pitsch tolerances: ±0.25 (±0.01) Case tolerances: ±0.5 (±0.02) Note: Before attaching the heatsink, the product label on converter has to be removed for optimal performance. For volume orders we can supply the converters with heatsink already mounted. Please contact us for a relative quotation. Order code: TEN-HS4 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 9 g (0.31oz) without converter 17.2 (0.68) max. Converter Heat-sink Thermal pad Clamp31.0 (1.22) max. 31.1 (1.22) Heat-sink TEN-HS4 (optional) Heat-Sink (Option) Application note: www.tracopower.com/ overview/ten20