TEN15WI TRACOPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

u Ultra-wide 4:1 input range u High efficiency up to 86 % u Extended operating temperature range –40°C to +85°C max. u Indefinite short circuit protection u I/O isolation 1500 VDC u Built-in filter meets EN 55022, Class A and FCC, Level A without external components u Remote On/Off u Industry standard pinout u Six-side shielded case u Lead free design, fully RoHS compliant u 3–year product warranty DC/DC Converters TEN 15WI Series, 15 Watt The TEN 15WI series of DC/DC converters, comprising 10 different models, has been designed for a wide range of applications including communications, industrial systems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and an extended temperature range of –40°C to +85°C. Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 15-2410WI 3,3 VDC 3’000 mA 78 % TEN 15-241 1WI 5, 1 VDC 2‘950 mA 82 % TEN 15-241 2WI 9 – 36 VDC 1 2 VDC 1’250 mA 85 % TEN 15-2422WI (24 VDC nominal) ±1 2 VDC ±625 mA 85 % TEN 15-2423WI ±1 5 VDC ±500 mA 86 % TEN 15-4810WI 3,3 VDC 3’000 mA 78 % TEN 15-481 1WI 5, 1 VDC 2‘950 mA 82 % TEN 15-481 2WI 1 8 – 75 VDC 1 2 VDC 1’250 mA 85 % TEN 15-4822WI (48 VDC nominal) ±1 2 VDC ±625 mA 85 % TEN 15-4823WI ±1 5 VDC ±500 mA 86 % Models UL 60950-1 not recommended for new design in

http:/ /www.tracopower.com Page 2 of 3 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications Input current at no load 24 Vin models: 25 mA typ. 48 Vin models: 15 mA typ. Input current at full load 24 Vin; 3.3 Vout models: 528 mA typ. 24 Vin; other output models: 740 mA typ. 48 Vin; 3.3 Vout models: 264 mA typ. 48 Vin; other output models: 370 mA typ. Surge voltage 24 Vin models: 50 V max. (100 msec. max.) 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 10 – 100 % 1 % max. Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max. Temperature coefficient ±0.02 %/K Output current limitation >110 % of Iout max., foldback Short circuit protection indefinite (automatic recovery) Capacitive load single output models: 470 µF max. dual output models: 220 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C (–40F to +185°F) – Case temperature +100°C max. – Storage –55°C to +125°C (–67°F to +257°F) Load derating – without heatsink 2.5 %/K above 60°C – with heatsink 3.3 %/K above 70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >700’000 h Isolation voltage (60 sec.) – Input/Output 1‘500 VDC Isolation capacitance – Input/Output 1200 pF typ Isolation resistance – Input/Output (500 VDC) >1’000 MOhm Switching frequency (fixed) 330 kHz typ. (pulse width modulation) – Off idle current: 10 mA max. Safety approvals cUL/UL 60950-1, IEC/EN 60950-1 – Certification documents www.tracopower.com/ overview/ten15wi Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf – RoHS Ro H S d i r e c t i ve 2011/6 5/E U DC/DC Converters TEN 15WI 15 Watt Physical Specifications Casing material copper, nickel plated Baseplate material non conductive FR4 Potting material Epoxy (UL 94 V-0 rated) Weight 32 g (1.09oz) Soldering temperature max. 265°C / 10 sec. Thermal Impedance 12.2 K/W typ. 9.2 K/W typ. (with Heatsink)

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com DC/DC Converters TEN 15WI 15 Watt Outline Dimensions 50.8 (2.00) Insulated baseplate Bottom View 25.4 (1.00) Ø1.0 (Ø0.04) 10.16 (0.400) 10.16 (0.400) 7.62 (0.300) 7.62 (0.300) 2.54 (0.100) 5.08 (0.200) 20.32 (0.800) 15.2 (0.60) 10.2 (0.40) 6.0 (0.24) Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 +Vout +Vout

4 No pin Common

5 –Vout –Vout

6 Remote On/Off

Rev. March 17 , 2023 Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.039 ±0.002) Pin pitch tolerances: ±0.25 (±0.01) Casing tolerances: x.x ±0.5 (x.xx ±0.02) x.xx ±0.13 (x.xxx ±0.005) Note: Before attaching the heatsink, the product label on converter has to be removed for optimal performance. For volume orders we can supply the converters with heatsink already mounted. Please contact us for a relative quotation. Order code: TEN-HS4 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 9 g (0.31oz) without converter 18.0 (0.71) max. Converter Heat-sink Thermal pad Clamp31.0 (1.22) max. 31.1 (1.22) Heat-sink TEN-HS4 (optional) Heat-Sink (Option) Supporting documents: www.tracopower.com/ overview/ten15wi