TEN15-1222

TEN15 TRACOPOWER | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

Features

◆ Wide 2:1 input range ◆ High efficiency up to 88% ◆ Extended operating temperature range –40°C to +85°C ◆ Indefinite short circuit protection ◆ I/O isolation 1500 VDC ◆ Input filter to meet EN 55022, Class A and FCC, level A without external components ◆ Industry standard footprint ◆ Shielded metal case with insulated baseplate ◆ 3-year product warranty DC/DC Converters TEN 15 Series, 15 Watt The TEN 15 series is a family of high performance 15W DC/DC converters in a compact 2” x 1” low profile package with industry standard footprint. A high effici- ency allows a wide operating temperature range of –40°C to +85°C. A built-in EMI filter is built in to meet EN 55022, class A without any external components. Further standard features include over voltage protection and short-circuit protec - tion. Typical applications for these converters are battery operated equipment, in - strumentation, distributed power architectures in communication and industrial elec- tronics, everywhere where isolated, tightly regulated voltages are required. Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 15-1210 3.3 VDC 4’000 mA 79 % TEN 15-1211 5 VDC 3‘000 mA 82 % TEN 15-1212 9 – 18 VDC 12 VDC 1’250 mA 86 % TEN 15-1213 (12 VDC nominal) 15 VDC 1‘000 mA 86 % TEN 15-1221 ±5 VDC ±1500 mA 83 % TEN 15-1222 ±12 VDC ±625 mA 86 % TEN 15-1223 ±15 VDC ±500 mA 84 % TEN 15-2410 3.3 VDC 4’000 mA 80 % TEN 15-2411 5 VDC 3‘000 mA 84 % TEN 15-2412 18 – 36 VDC 12 VDC 1‘250 mA 85 % TEN 15-2413 (24 VDC nominal) 15 VDC 1‘000 mA 85 % TEN 15-2421 ±5 VDC ±1’500 mA 84 % TEN 15-2422 ±12 VDC ±625 mA 86 % TEN 15-2423 ±15 VDC ±500 mA 86 % TEN 15-4810 3.3 VDC 4‘000 mA 81 % TEN 15-4811 5 VDC 3‘000 mA 83 % TEN 15-4812 36 – 75 VDC 12 VDC 1‘250 mA 87 % TEN 15-4813 (48 VDC nomial) 15 VDC 1‘000 mA 86 % TEN 15-4821 ±5 VDC ±1‘500 mA 85 % TEN 15-4822 ±12 VDC ±625 mA 88 % TEN 15-4823 ±15 VDC ±500 mA 87 % Models not recommended for new design in

http://www.tracopower.com Page 2 of 4 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications Input current at no load 12 Vin models: 30 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 15 mA typ. Input current at full load 12 Vin; 3.3 VDC models: 1470 mA typ. 12 Vin; other models: 1550 mA typ. 24 Vin; 3.3 VDC models: 730 mA typ. 24 Vin; other models: 780 mA typ. 48 Vin; 3.3 VDC models: 360 mA typ. 48 Vin; other models: 380 mA typ. Surge voltage 12 Vin models: 36 V max. (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 2 % – 100 % single output models: 0.5 % max. dual output models: 1 % max. (balanced load) 5 % max. (load cross variation 25 % / 100 %) Minimum load 2 % of rated max. output current. (Operation at lower load is safe but major deviations to specifyed data may occur) Ripple and noise (20 MHz Bandwidth) single output models: 50 mVpk-pk max. dual output models: 75 mVpk-pk max. Temperature coefficient ±0.02 %/K Start up time (nominal Vin and constant resistive load) 20 ms typ. Transient response (25 % load step change) 250 µs typ. Short circuit protection continiuous (automatic recovery) Over load protection 150 % of Iout max typ. foldback Over voltage protection 3.3 VDC models: 3.9 V 5.0 VDC models: 6.2 V

12 VDC models: 15 V

15 VDC models: 18 V

Capacitive load 3.3 VDC models: 10‘200 µF max. 5 VDC models: 7‘050 µF max. 12 VDC models: 1‘035 µF max. 15 VDC models: 750 µF max. ±5 VDC models: ±1‘020 µF max. ±12 VDC models: ±495 µF max. ±15 VDC models: ±165 µF max. DC/DC Converters TEN 15 Series 15 Watt

http://www.tracopower.com Page 3 of 4 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. General Specifications Temperature ranges – Operating – 40°C to +85°C – Casing temperature +100°C max. – Storage –55°C to +105°C Derating 3.3 / 5.0 VDC models: 2.5 %/K above 60°C other models: 3.3 %/K above 70°C Thermal impedance – Natural convection 12°C/W – Natural convection with heatsink 10°C/W Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >2.3 Mio h Isolation Test Voltage (Input/Output, 60s) 1‘600 VDC Insulation System Functional Isolation Capacitance (Input/Output) 300 pF max. Isolation Resistance (Input/Output) >1 G Ohm Switching frequency single output models: 500 kHz typ. (pulse width modulation) dual output models: 300 kHz typ. (pulse width modulation) EMC immunity – Electrostatic discharge ESD EN 61000-4-2 8 kV / 6 kV, criteria B – RF field susceptibility EN 61000-4-3 10 V/m, criteria A – Electrical fast transient / burst immunity input EN 61000-4-4 ±2 kV, criteria B – Surge immunity EN 61000-4-5 ±1 kV, criteria B – Immunity to conducted RF disturbances EN 61000-4-6 10 Vrms, criteria A Vibration acc. MIL-STD-810F Thermal shock acc. MIL-STD-810F Safety standards UL 60950-1, EN 60950-1, IEC 60950-1 UL 62368-1 Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913 Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material copper, nickel plated Baseplate material non conductive FR4 Potting material epoxy (UL 94V-0 rated) Weight 27 g ( 09.5oz) Soldering temperature max. +265°C / 10 sec. DC/DC Converters TEN 15 Series 15 Watt Supporting documents : www.tracopower.com/overview/ten15

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com DC/DC Converters TEN 15 Series 15 Watt Outline Dimensions Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 +Vout +Vout

4 No pin Common

5 –Vout –Vout Pin-Out Rev. May 7 , 2021 Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.02 ±0.002) Pin pitch tolerances: ±0.25 (±0.01) Casing tolerances: ±0.5 (±0.02) 5.08 10.16 25.4 10.2 6.0 50.8 15.2 20.32 Insulated baseplate (2.0) (0.8) (0.6) (0.2) (0.4) (0.4) (1.0) 2.5 (0.1) (0.4)(0.24) Bottom View 1 4 10.16 10.2 (0.4) Note: The product label on converter has to be re - moved before mounting the heat-sink. For volume orders converters will be supplied with heat-sinks already mounted. Please con- tact factory for quotation. Separate heat-sinks are only available for prototypes and small quantity orders. Order code: TEN-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 17g (0.60oz) without converter Thermal impedance after assembling: 10 K/W 56.0 (2.2) max. 14.5 (0.57) 16.8 (0.66) max. Converter Heat-sink Thermal pad Clamp Heat-Sink (Option)