TEN12WI TRACOPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

◆ Ultrawide 4 : 1 input range ◆ Full SMD-design ◆ Input filter meets EN 55022, Class A and FCC, level A without external components ◆ Indefinite short-circuit protection ◆ Overvoltage protection ◆ I/O isolation 1500 VDC ◆ operating temperature range –40°C to 85°C ◆ Remote On/Off (optional) ◆ Insulated baseplate ◆ Industry standard pinout ◆ 3-year product warranty The TEN 12WI series is a family 12W DC/DC converter modules featuring ultra wide 4:1 input voltage ranges in a compact 2“x1.0“ low profile package with in - dustry-standard footprint. A high efficiency up to 84% allows operating temperatures from –40°C to +85°C. A built-in EMI input filter complies with EN 55022, class A without any external components. Further standard features include remote On/Off (optional), over voltage protec - tion and continuous short-circuit protection. Typical applications for these converters are battery operated equipment and distri- buted power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required. Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 12-2410 3,3 VDC 2‘400 mA 78 % TEN 12-2411 5 VDC 2‘000 mA 82 % TEN 12-2412 12 VDC 1‘000 mA 84 % TEN 12-2413 9 – 36 VDC 15 VDC 800 mA 84 % TEN 12-2421 (24 VDC nominal) ±5 VDC ±1‘000 mA 82 % TEN 12-2422 ±12 VDC ±500 mA 84 % TEN 12-2423 ±15 VDC ±400 mA 84 % TEN 12-4810 3,3 VDC 2‘400 mA 78 % TEN 12-4811 5 VDC 2‘000 mA 82 % TEN 12-4812 12 VDC 1‘000 mA 84 % TEN 12-4813 18 – 75 VDC 15 VDC 800 mA 84 % TEN 12-4821 (48 VDC nominal) ±5 VDC ±1‘000 mA 82 % TEN 12-4822 ±12 VDC ±500 mA 84 % TEN 12-4823 ±15 VDC ±400 mA 84 % Models (UL1950) not recommended for new design in

http://www.tracopower.com Page 2 of 3 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. DC/DC Converters TEN 12WI Series 12 Watt Input Specifications Input current (no load) 24 Vin models: 40 mA typ. 48 Vin models: 20 mA typ. Input current (full load) 24 Vin; 3.3 Vout models: 425 mA typ. 24 Vin; 5 & ±5 Vout models: 510 mA typ. 24 Vin; other output models: 600 mA typ. 48 Vin; 3.3 Vout models: 215 mA typ. 48 Vin; 5 & ±5 Vout models: 255 mA typ. 48 Vin; other output models: 300 mA typ. Surge voltage (1 sec. max.) 24 Vin models: 42 V max.. 48 Vin models: 84 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. ±0.5 % max. – Load variation 10 – 90 % ±0.5 % max. Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk typ. Temperature coefficient ±0.02 %/K Output current limitation >1 10 % of Iout max. foldback Short circuit protection indefinite (automatic recovery) Capacitive load – single output models 470 µF max. – dual output models 150 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +100°C max. – Storage –55°C to +125°C Derating above 60°C 2 %/K Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >700’000 h Isolation voltage (60 sec.) – Input/Output 1‘500 VDC Isolation capacitance – Input/output) 200 pF typ Isolation resistance – Input/Output (500 VDC) >1‘000 M Ohm Switching frequency (fixed) 400 kHz typ. (pulse width modulation PWM) – Off: 0 ... 0.8 VDC or short circuit pin 2 and pin 6 – Off idle current: 10 mA max. Safety standards: UL 1950-1, EN 60950,1 IEC 60950 compliance up to 60 VDC input voltage (SELV limit) Safety approvals: – UL 1950 (UL 60950-1 not intended) www.ul.com -> certifications -> File e188913 Environmental compliance – Reach www.tracopower.com/products/ten12wi-reach.pdf – RoHS RoHS directive 2011/65/EU

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com DC/DC Converters TEN 12WI Series 12 Watt Physical Specifications Casing material steel, nickel plated Baseplate non conductive FR4 Potting material silicon rubber (UL 94 V-0 rated) Weight 30 g (1.2 oz) Soldering temperature max. 265°C / 10 sec. Outline Dimensions Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 +Vout +Vout

4 No pin Common

5 –Vout –Vout Pin-Out Rev. October 6, 2021 Insulated baseplate Bottom View1 4 50.8 (2.0) 15.2 (0.60) 20.32 (0.80) 5.08 (0.20) 2.5 10.16 (0.40) 10.16 (0.40) (1.0) (0.24) 7.62 (0.30) (0.10) 25.4 10.2 (0.40) 6.0 Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.02 ±0.002) Pin pitsch tolerances: ±0.25 (±0.01) Case tolerances: ±0.5 (±0.02)