TEM2 TRACOPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
◆ DIL-24 plastic package ◆ Tightly regulated output ◆ Very low output noise ◆ Short circuit protection ◆ Operating temperature range –25°C to +70°C ◆ I/O isolation 1’000 VDC ◆ Internal filter ◆ Industry standard pinout ◆ 3-year product warranty UL 60950-1 Models not recommended for new design in
http://www.tracopower.com Page 2 of 3 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications Input current no load 5 Vin models: 80 mA typ. 12 Vin models: 40 mA typ. 24 Vin models: 20 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 7 .5 V max. 12 Vin models: 15 V max. 24 Vin models: 30 V max. Input filter Pi-Filter Output Specifications Voltage set accuracy ±3 % Regulation – Input variation Vin min. to Vin max. ±0.3 % max. – Load variation 10 – 100 % single output models: ±0.5 % max. dual output models balanced load: ±1.0 % max. dual output models unbalanced load: ±3.0 % max. Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max Temperature coefficient ±0.02 %/K Current limitation >120 % of Iout max., constant current Short circuit protection indefinite Capacitive load single output models: 470 µF max. dual output models: 220 µF max. General Specifications Temperature ranges – Operating –25°C to +70°C
5 VDC output models: –25°C to +60°C
– Case temperature +95°C max. – Storage –40°C to +125°C Derating 3 %/K above +70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >800‘000 Mio. h Isolation voltage (60 sec.) – Input/Output 1’000 VDC Isolation capacitance – Input/Output 100 pF typ. Isolation resistance – Input/Output (500 VDC) >1‘000 M Ohm Switching frequency 80 kHz typ. (Pulse frequency modulation PFM) Safety standards cUL/UL 60950-1, IEC/EN 60950-1 Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf – RoHS directive 201 1/65/EU DC/DC Converters TEM 2 Series 2 Watt
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com Page 3 of 3 Physical Specifications Casing material non conductive plastic (UL94V-0 rated) Weight 12 g (0.42 oz) Soldering temperature max. 260°C / 10 sec. Outline Dimensions mm (inches) 2.0 (0.08) 2324 22 1 2 3 10.2 (0.40) 4.5 31.8 (1.25) (0.1) (0.1) 2.54 (0.1) (0.1) 10 1112 1514 13 27.94 (1.10) (0.18) 15.25 (0.60) 20.3 (0.80) 2.54 (0.10) Bottom view Pin diameter ø 0.5 ±0.05 (0.02) ±0.002 Tolerances ±0.5 (±0.02) Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc)
2 NC –Vout
3 NC Common
10 –Vout Common 11 +Vout +Vout 12 –Vin (GND) –Vin (GND) 13 –Vin (GND) –Vin (GND) 14 +Vout +Vout 15 –Vout Common
22 NC Common
23 NC –Vout
24 +Vin (Vcc) +Vin (Vcc) Pin-Out DC/DC Converters TEM 2 Series 2 Watt Specifications can be changed any time without notice. Rev. October 14, 2022 NC = not connected