TEL2 TRACOPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

u Ultracompact DIP-16 plastic package u Wide 2:1 input range u Regulated output u I/O isolation 1500V u Input filter meets EN55032, class A without ext. components u Low ripple and noise u Indefinite shortcircuit protection u Operating temperature range –40°C to +80°C u Lead free design, RoHS compliant u 3-year product warranty The TEL-2 series, comprising 28 models, is a range of isolated 2 Watt converters in a low profile DIP-16 package. Requiring only 3.25 cm 2 of space on the PCB they pro - vide a complete DC/DC converter without need of any external components. Wide input range and tightly regulated output voltage qualifies these converters for many cost critical applications in industrial and consumer electronics. Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEL 2-0510 3.3 VDC 500 mA 70 % TEL 2-051 1 5 VDC 400 mA 73 % TEL 2-051 2 1 2 VDC 1 65 mA 75 % TEL 2-0513 4.5 – 9 VDC 1 5 VDC 135 mA 73 % TEL 2-0521 (nominal 5 VDC) ±5 VDC ±200 mA 64 % TEL 2-0522 ±1 2 VDC ±85 mA 69 % TEL 2-0523 ±1 5 VDC ±65 mA 71 % TEL 2-1 210 3.3 VDC 500 mA 73 % TEL 2-1 21 1 5 VDC 400 mA 77 % TEL 2-1 21 2 1 2 VDC 1 65 mA 80 % TEL 2-1 213 9 – 1 8 VDC 1 5 VDC 135 mA 80 % TEL 2-1 221 (nominal 1 2 VDC) ±5 VDC ±200 mA 73 % TEL 2-1 222 ±1 2 VDC ±85 mA 78 % TEL 2-1 223 ±1 5 VDC ±65 mA 78 % TEL 2-2410 3.3 VDC 500 mA 72 % TEL 2-241 1 5 VDC 400 mA 77 % TEL 2-241 2 1 2 VDC 1 65 mA 80 % TEL 2-2413 1 8 – 36 VDC 1 5 VDC 135 mA 81 % TEL 2-2421 (nominal 24 VDC) ±5 VDC ±200 mA 74 % TEL 2-2422 ±1 2 VDC ±85 mA 78 % TEL 2-2423 ±1 5 VDC ±65 mA 80 % TEL 2-4810 3.3 VDC 500 mA 71 % TEL 2-481 1 5 VDC 400 mA 73 % TEL 2-481 2 1 2 VDC 1 65 mA 79 % TEL 2-4813 36 – 75 VDC 1 5 VDC 135 mA 79 % TEL 2-4821 (nominal 48 VDC) ±5 VDC ±200 mA 71 % TEL 2-4822 ±1 2 VDC ±85 mA 77 % TEL 2-4823 ±1 5 VDC ±65 mA 77 % Models UL 60950-1

http:/ /www.tracopower.com Page 2 of 3 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. DC/DC Converters TEL 2 Series 2 Watt Input Specifications Input current at full load / no load 5 Vin models: 600 mA / 40 mA typ. (nominal input) 12 Vin models: 220 mA / 20 mA typ. 24 Vin models: 110 mA / 10 mA typ. 48 Vin models: 55 mA / 8 mA typ. Start-up voltage / 5 Vin models: 4 VDC / 3.5 VDC typ. under voltage shut down 12 Vin models. 7 VDC / 6.5 VDC typ. 24 Vin models: 12 VDC / 11 VDC typ. 48 Vin models. 24 VDC / 22 VDC typ. Surge voltage (100 ms max.) 5 Vin models: 11 V max. 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55032 class A, FCC part 15, level A Output Specifications Voltage set accuracy ±2 % max. Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 25 – 100 % single output models: 0.75 % max. dual output models: 2.0 % (balanced load) Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max Temperature coefficient ±0.02 %/K Short circuit protection indefinite, automatic recovery Minimum load 25 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Capacitive load 3.3 VDC output models: 2’200 µF max. 5 VDC output models: 1’000 µF max. 12 VDC output models: 170 µF max. 15 VDC output models: 110 µF max. ±5 VDC output models: 470 µF max. ±12 VDC output models: 100 µF max. ±15 VDC output models: 47 µF max. General Specifications Temperature ranges – Operating –40°C to +80°C – Case +100°C max. – Storage –55°C to +105°C Derating 2.9 %/K above 65°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1.2 Mio h Isolation voltage Input/Output (60 s) 1’500 VDC Isolation capacitance Input/Output 250 pF max. Isolation resistance Input/Output (500 VDC) >1‘000 MOhm Switching frequency 150 - 550 kHz (PFM) 300 kHz typ. (PFM) Safety standards UL/ cUL 60950-1 , IEC/EN 60950-1 Safety approval CB 60950-1 – Certification documents www.tracopower.com/ overview/tel2 Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf – RoHS Ro H S d i r e c t i ve 2011/6 5/E U

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower.com Page 3 of 3 Outline Dimensions mm (inches) 8.0 (0.31) 3.8 23.8 All dimension in mm (inch) Tolerances: x.x ±0.25 (x.xx ±0.01) x.xx ±0.13 (x.xxx ±0.005) Pin diameter tolerances: x.x ±0.05 (x.xx ±0.002) (0.600) (0.100) 7 8 10 9 2.54 (0.15) 10.16 (0.400) 13.7 (0.54) 1.77 (0.070) Bottom view 0.5 (0.02) 23.8 (0.94) 15.24 Ø0.5 (Ø0.02) (0.94) (0.12) 3.0 Pin Single Dual 1 –Vin (GND) –Vin (GND)

7 NC NC

8 NC Common

10 –Vout –Vout 16 +Vin +Vin Pin-Out NC = Not connected Rev. March 6, 2023 DC/DC Converters TEL 2 Series 2 Watt Physical Specifications Casing material non conductive FR4 Potting material epoxy, UL94V-0 - rated Weight 5.1 g (0.17oz) Soldering temperature 265°C / 10 s max.