DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 16

Technical content

T3DSO1000 / T3DSO1000A Data Sheet Oscilloscopes Debug with Confi dence

100 MHz – 350 MHz

Key Specifi cations Bandwidth 100 MHz, 200, 350 MHz Channels 2 or 4 Memory up to 14 Mpts/Ch (28 Mpts interleaved) Sample Rate up to 1 GS/s / 2 GS/s interleaved Display 7" Bright TFT LCD (800 x 480) Connectivity USB Host, USB Device, LAN Tools for Improved Debugging

  • Long Capture – Up to 28 Mpts interleaved. Capture more time and show more waveform detail.
  • Math and Measure – 7 basic math functions plus FFT and 38 automatic measurement parameters. Extract results from waveforms and measurements.
  • Connectivity – USB for mass storage, printing and PC control, plus LAN for fast data transfer. Save data for external analysis and screen images for reports.
  • Serial Bus Trigger and Decode – I2C, SPI, UART, RS232, CAN, LIN. Debug serial buses directly in your Oscilloscope.
  • Waveform Sequence Recorder – record and play back up to 80,000 waveforms. Replay the changing waveform history.
  • Optional MSO – 16 Digital Channels (4 channel and A series only). Add mixed signal debugging to your Oscilloscope.

The T3DSO1000 series employs a new generation of high speed display technology that provides excellent signal clarity, fi delity and performance. The system noise floor is also lower than similar products in the industry. It comes with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/ sec (sequence mode). The T3DSO1000 also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. Teledyne Test Tools latest oscilloscope offering supports multiple powerful triggering modes including serial bus triggering. Serial bus decoding for IIC, SPI, UART, CAN, LIN bus types is included. The models also include History waveform recording, and sequential triggering that enable extended waveform recording and analysis. T3DSO1102: 2 Channel 100 MHz T3DSO1104: 4 Channel 100 MHz T3DSO1202A: 2 Channel 200 MHz T3DSO1204: 4 Channel 200 MHz T3DSO1302A: 2 Channel 350 MHz Key Features

  • 100 MHz, 200 MHz and 350 MHz bandwidth models
  • Two channel series have one ADC, four channel series have two ADCs. When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s (1 Gsa/s for the A series). When a single channel per ADC is active, it has sample rate of 1 GSa/s (2 Gsa/s for the A Series)
  • The newest generation of high speed display technology › Waveform capture rate up to 100,000 wfm/s (normal mode), and 400,000 wfm/s (sequence mode) › Supports 256-level intensity grading and color display modes Record length up to 28 Mpts › Digital trigger system Teledyne Test Tools new T3DSO1000 Oscilloscopes feature two channel and four channel models. The two channel models are available with 100 MHz, 200 MHz and 350 MHz analog bandwidths, a single ADC with up to 2 GSa/s maximum sample rate, and memory up to 28 Mpts. The four channel scope is available in 100 and 200 MHz models and incorporates two 1 GSa/s ADCs and two 14 Mpts memory modules. When all channels are enabled, each channel has sample rate of 500 MSa/s, or 1 GS/s for the A series, and a standard record length of 7 Mpts, or 14 Mpts for the A Series. When only a single channel per ADC is active, the maximum sample rate and the maximum record length are doubled. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design. Another powerful addition is the new 1 million point FFT math function that gives the T3DSO1000 very high frequency resolution when observing signal spectra. The new digital design also includes a hardware co-processor that delivers measurements quickly and accurately without slowing acquisition and front-panel response. The features and performance of Teledyne Test Tools T3DSO1000 family cannot be matched in this price class. The four channel and A series includes even more functions, including: searching and navigating, on-screen Bode plot, 16 digital channels (Option), an external USB powered 25 MHz AWG module (Option), a USB WIFI adapter (Option), and an embedded application that allows remote control via web browser.
  • Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern
  • Serial bus triggering and decoding (Standard), supports protocols IIC, SPI, UART, RS232, CAN, LIN
  • Video trigger, supports HDTV
  • Low background noise with voltage scales from 500 μV/div to 10 V/div
  • 10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print Segmented acquisition (Sequence) mode, divides the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event.
  • History waveform record (History) function, maximum recorded waveform length is 80,000 frames.
  • Automatic measurement function for 38 parameters as well as Measurement Statistics, Zoom, Gating, Math, History and Reference functions
  • 1 Mpts FFT
  • Math and measurement functions use all sampled data points (up to 28 Mpts)
  • Math functions (FFT, addition, subtraction, multiplication,division, integration, differential, square root)
  • Preset key can be customized for user settings or factory “defaults”
  • Security Erase mode
  • High Speed hardware based Pass/ Fail function
  • MSO, 16 digital channels1)
  • Bode plot1) Models and key Specifi cation Model T3DSO1102 T3DSO1104 T3DSO1204 T3DSO1202A T3DSO1302A Bandwidth 100 MHz 200 MHz 200 MHz 350 MHz SamplingRate (Max.) Two channel series have a single 1 GSa/s ADC, four channel series have two 1 GSa/s ADCs. When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per pair is active, that channel has sample rate of

1 GSa/s

The A series has a single 2 GSa/s ADC. When both channels are enabled, each channel has a maximum sample rate of 1 GSa/s. When a single channel is active, that channel has sample rate of 2 GSa/s Channels 4, no EXT (T3DSO1104 and T3DSO1204 four channel series) 2+EXT (T3DSO1102, T3DSO1202A and T3DSO1302A two channel series) Memory Depth (Max.) 7 Mpts/CH (not interleave mode);

14 Mpts/CH (interleave mode)

14 Mpts/CH (not interleave mode);

28 Mpts/CH (interleave mode)

Waveform Capture Rate (Max.) 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) Trigger Type Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video Serial Trigger and decoder (Standard) IIC, SPI, UART/RS232, CAN, LIN

16 Digital Channels

(Option not available on the T3DSO1102) Maximum waveform capture rate up to 1 GSa/s, Record length up to 14 Mpts/CH USB AWG module (Option not available on the T3DSO1102) One channel, 25 MHz, sample rate of 125 MHz, wave length of 16 kpts Bode plot (Not available on the T3DSO1102) Minimum start frequency of 10 Hz, minimum scan bandwidth of 500 Hz, maximum scan bandwidth of 120 MHz (dependent on Oscilloscope and AWG bandwidth), 500 maximum scan frequency points USB WIFI adapter (Option not available on the T3DSO1102) 802.11b/g/b, WPA-PSK, the adapter must be purchased separately by the scope user (TP-Link TL-WN725N) I/O USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Sbus (Teledyne Test Tools MSO) Probe (Std) 2/4 pcs passive probe 2 pcs passive probe Display 7 inch TFT-LCD (800 x 480) Weight All models except T3DSO1102: Without package 2.6 Kg; With package 3.8 Kg T3DSO1102: Without package 2.5 Kg; With package 3.5 Kg

  • Search and navigate1)
  • USB AWG module1)
  • USB WIFI adapter1)
  • Web Browser based control1)
  • Large 7 inch TFT-LCD display with 800 * 480 resolution
  • Multiple interface types: USB Host, USB Device (USB-TMC), LAN, Trigger Out
  • Supports SCPI remote control commands
  • Supports Multi-language display and embedded online help 1) Not available on the T3DSO1102.

FUNCTION & CHARACTERISTICS Front panel of T3DSO1104, T3DSO1202A, T3DSO1204, T3DSO1302A Front panel of T3DSO1102

  • 7-inch TFT-LCD display with 800 * 480 resolution
  • Most commonly used functions are accessible using 10 different one-button operation keys: Auto Setup, Default, Cursor, Measure, Roll, History, Persist, Clear
  • Sweep, Zoom, Print 7 inch TFT -LCD display and 10 one-button menus When all channels are enabled, each channel has a maximum sample rate of up to 1 GSa/s (depending on the model) When a single channel per pair is active, that channel has sample rate of up to 2 GSa/s (depending on the model) Record Length of Up to 28 Mpts depending on model and channels (single channel/pair mode). Waveform Capture Rate Up to 400,000 wfm/s The four channel series has two 1 GSa/s ADC chips (channel 1 and 2 share one, channel 3 and 4 share another), so that each channel can achieve sample rates up to 500 MSa/s and work on bandwidths of 200 MHz when all channels are enabled. Using hardware-based Zoom technologies and max record length of up to 28 Mpts, users are able to over-sample to capture longer time periods at higher resolution and use the zoom feature to see more details within each signal. With a waveform capture rate of up to 400,000 wfm/s (sequence mode), the oscilloscope can easily capture the unusual or low-probability events.

256-Level Intensity Grading and Color Temperature Display History Waveforms (History) Mode and Segmented Acquisition (Sequence) Gate and Zoom MeasurementSerial Bus Decoding Function (Standard) New display technology provides for fast refresh rates. The resulting intensity-graded trace is brighter for events that occur with more frequency and dims when the events occur with less frequency. Playback the latest triggered events using the history function. Segmented memory collection will store trigger events into multiple (Up to 80,000) memory segments, each segment will store triggered waveforms and timestamp each frame. Through Gate and Zoom measurement, the user can specify an arbitrary interval of waveform data analysis and statistics. This helps avoid measurement errors that can be caused by invalid or extraneous data, greatly enhancing the measurements’ validity and flexibility. The color temperature display is similar to the intensity- graded trace function, but the trace occurrence is represented by different colors (color “temperature”) as opposed to changes in the intensity of one color. Red colors represents the more frequent events, while blue is used to mark points that occur lest frequently. T3DSO1000 displays the decoding through the events list. Bus protocol information can be quickly and intuitively displayed in a tabular format. True measurement to 14 M points or

28 M points depending on the model

At any one timebase, T3DSO1000 can measure using all acquired sample points. This ensures the accuracy of measurements while the math coprocessor decreases measurement time and increases ease-of-use.

FUNCTION & CHARACTERISTICS

1 M points FFT 16 Digital Channels/MSO

(Option not available on the T3DSO1102) The math co-processor enables FFT analysis of incoming signals using up to 1 M samples per waveform. This provides high frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectrum measurement needs. 16 digital channels enables users to acquire and trigger on the waveforms then analyze the pattern, simultaneously with one instrument. Color coded logic levels clearly differentiate high and low states. Hardware-Based High Speed Pass/Fail function The T3DSO1000 utilizes a hardware-based Pass/Fail function, performing up to 40,000 Pass/Fail decisions each second. Easily generate user defi ned test templates provide trace mask comparison making it suitable for long-term signal monitoring or automated production line testing. Customizable Default Key The current parameters of the oscilloscope can be preset to Default Key through the Save menu. Search and Navigate (not available on the T3DSO1102) The T3DSO1000 series can search events specifi ed by the user in a frame. It can also navigate by time (delay position) and historical frames. Search and Navigate is not available on the T3DSO1102.

Bode Plot (not available on the T3DSO1102) USB 25 MHz AWG Module (Option not available on the T3DSO1102) T3DSO1000 can control the USB AWG module, control an independent Teledyne Test Tools T3AFG instrument, scan an object’s amplitude and phase frequency response, and display the data as a Bode Plot. It can also show the result lists, and export the data to a USB disk. Not available for the T3DSO1102. The T3DSO1000 series supports an optional USB 25 MHz function/arbitrary waveform generator that is operated from the USB host connection. Functions include Sine, Square, Ramp, Pulse, Noise, DC and 45 built-in waveforms. The arbitrary waveforms can be accessed and edited by the Teledyne Test Tools PC software. Option not available for the T3DSO1102. Complete Connectivity T3DSO1000 supports USB Host, USB Device (USB-TMC), LAN(VXI-11), Pass/Fail and Trigger Out. Back panel of T3DSO1104, T3DSO1202A, T3DSO1204, T3DSO1302A Back panel of T3DSO1102 Web control (not available on the T3DSO1102) With the new embedded web server, users can control the Oscilloscopes from a simple web page. This provides remote troubleshooting and monitoring capabilities. USB WiFi Adapter (Option not available on the T3DSO1102) WiFi control of instrumentation can provide a convenient and safe method of confi guring and collecting data. This new feature works with a Teledyne Test Tools approved WiFi adapter to provide wireless control and communications with Teledyne Test Tools 4 channel scopes. Option not available for the T3DSO1102. The approved adapter is the TP-Link TL-WN725N (not supplied). USB WiFi Adapter

Model T3DSO1102, T3DSO1104, T3DSO1204 T3DSO1202A, T3DSO1302A Acquire System Sampling Rate 1 GSa/s (single channel/pair),

500 MSa/s (two channels/pair)

2 GSa/s (single channel),

1 GSa/s (two channels)

Memory Depth Max 14 Mpts/Ch (single channel/pair), 7 Mpts/Ch (two channels/pair) Max 28 Mpts/Ch (single channel),

14 Mpts/Ch (two channels)

Peak Detect 2 nsec (Four channel series) 4 nsec (Two channel series) 1 nsec Average Averages: 4, 16, 32, 64, 128, 256, 512, 1024 Eres Enhance bits: 0.5, 1.5, 2, 2.5, 3; Selectable Waveform interpolation Sin(x)/x, Linear Input Channels 4, no EXT (four channel series) 2+EXT (two channel series) 2+EXT Coupling DC, AC, GND Impedance DC: (1 MΩ ± 2 %) || (15 pF ± 2 pF) (Four channel series) (Two channel series) DC: (50 Ω ± 2 %) Max.Input voltage 1 MΩ ≤ 400 Vpk (DC + Peak AC <= 10 kHz) 1 MΩ ≤ 400 Vpk (DC + Peak AC <= 10 kHz) DC: 50 Ω: < 5V rms CH to CH Isolation DC-Max BW > 40 dB Probe attenuation 0.1X, 0.2X, 0.5X, 1X, 2X, 5X, 10X……1000X, 2000X, 5000X, 10000X Vertical System Bandwidth (–3 dB ) 200 MHz (T3DSO1204) / T3DSO1202A)

350 MHz (T3DSO1302A)

100 MHz (T3DSO1102 / T3DSO1104)

Vertical Scale (Probe 1X) 500 μV/div – 10 V/div (1-2-5 sequence ) Offset Range (Probe 1X) 500 μV – 118 mV: ± 2 V 120 mV – 1.18 V: ± 20 V

1.2 V – 10 V: ± 200 V

500 μV – 100 mV: ± 2 V 102 mV – 1 V: ± 20 V

1.02 V – 10 V: ± 200 V

Bandwidth Limit 20 MHz ± 40 % 20 MHz ± 40 % Bandwidth Flatness DC – 10 % (BW): ± 1 dB DC – 60 % (BW): ± 1 dB Low Frequency Response (AC –3 dB) ≤ 10 Hz (at input BNC) ≤ 2 Hz (at input BNC) Noise ST-DEV ≤ 0.5 division (< 1 mV/div) ST-DEV ≤ 0.2 division (< 2 mV/div) ST-DEV ≤ 0.1 division (≥ 2 mV/div) SFDR including harmonics ≥ 35 dB DC Gain Accuracy ≤ ± 3.0%: 5 mV/div – 10 V/div ≤ ± 4.0%: ≤ 2 mV/div Offset Accuracy ± (1 % * Offset + 1.5 % * 8 * div + 2 mV): ≥ 2 mV/div ± (1 % * Offset + 1.5 % * 8 * div + 500 uV): ≤ 1 mv/div Risetime Typical 1.0 ns (T3DSO1302A) Typical 1.8 ns (T3DSO1202A / T3DSO1204) Typical 3.5 ns (T3DSO1102 / T3DSO1104) Overshoot (500 ps Pulse) < 10 % Horizontal System Timebase Scale 1.0 ns/div – 100 s/div 500 ps/div – 100 s/div Channel Skew < 100 ps Waveform Capture Rate Up to 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) Intensity grading 256 Levels Display Format Y-T, X-Y, Roll Timebase Accuracy ± 25 ppm Roll Mode 50 ms/div – 100 s/div (1-2-5 step)

Model T3DSO1102, T3DSO1104, T3DSO1204 T3DSO1202A, T3DSO1302A Trigger System Trigger Mode Auto, Normal, Single Trigger Level Internal: ± 4.5 div from the center of the screen EXT: ± 0.6 V (Two channel series) EXT/5: ± 3 V (Two channel series) Holdoff Range 80 ns – 1.5 s Trigger Coupling AC DC LFRJ HFRJ Noise RJ Coupling Frequency Response DC: Passes all components of the signal AC: Blocks DC components and attenuates signals below 8 Hz LFRJ: Blocks the DC component and attenuates the low-frequency components below 2 MHz HFRJ: Attenuates the high-frequency components above 1.2 MHz Coupling Frequency Response (EXT) DC: Passes all components of the signal AC: Blocks DC components and attenuates signals below 20 Hz LFRJ: Blocks the DC component and attenuates the low-frequency components below 7 KHz HFRJ: Attenuates the high-frequency components above 160 KHz DC: Passes all components of the signal AC: Blocks DC components and attenuates signals below 10 Hz LFRJ: Blocks the DCcomponent and attenuates the low-frequency components below 6 KHz HFRJ: Attenuates the high-frequency components above 200 KHz Trigger Accuracy (Typical) Internal: ± 0.2 div EXT (Two channel series): ± 0.4 div Trigger Sensitivity DC – Max BW 0.6 div EXT (Two channel series): 200 mVpp DC – 10 MHz 300 mVpp 10 MHz – BW frequency EXT/5 (Two channel series): 1 Vpp DC – 10 MHz

1.5 Vpp 10 MHz – BW frequency

Trigger Jitter < 100 ps Trigger Displacement Pre-Trigger: 0 – 100 % Memory Delay Trigger: 0 to 10,000 div Edge Trigger Slope Rising, Falling, Rising & Falling Source All channels/ EXT/ (EXT/5)/ AC Line (Two channel series) All channels/ AC Line (Four channel series) Slope Trigger Slope Rising, Falling Source All channels TimeRange 2 ns – 4.2 s Resolution 1 ns Pulse Trigger Polarity +wid , -wid Source All channels Pulse Range 2 ns ~ 4.2 s Resolution 1 ns Video Trigger Signal Standard NTSC, PAL, 720p/50, 720p/60, 1080p/50, 1080p/60, 1080i/50, 1080i/60, Custom Source All channels Sync Any, Select Trigger condition Line, Field

Window Type Absolute, Relative Source All channels Interval Trigger Slope Rising, Falling Source All channels Time Range 2 ns ~ 4.2 s Resolution 1 ns Dropout Trigger Timeout Type Edge, State Source All channels Slope Rising, Falling Time Range 2 ns ~ 4.2 s Resolution 1 ns Runt Trigger Polarity +wid , -wid Source All channels Time Range 2 ns ~ 4.2 s Resolution 1 ns Pattern Trigger Pattern Setting Invalid, Low, High Logic AND, OR, NAND, NOR Source All channels Time Range 2 ns ~ 4.2 s Resolution 1 ns Serial Trigger I2C Trigger Condition Start, Stop, Restart, No Ack, EEPROM, 7 bits Address & Data, 10 bits Address & Data, Data Length Source (SDA/SCL) All channels Data format Hex Limit Range EEPROM: =, >, < Data Length EEPROM: 1 byte Addr & Data: 1 ~ 2 byte Data Length: 1 ~ 12 byte R/W bit Addr & Data: Read, Write, Don’t care SPI Trigger Condition Data Source (CS/CL/Data) All channels Data format Binary Data Length 4 ~ 96 bit Bit Value 0, 1, X Bit Order LSB, MSB

Condition Start, Stop, Data, Parity Error Source (RX/TX) All channels Data format Hex Limit Range =, >, < Data Length 1 byte Data Width 5 bit, 6 bit, 7 bit, 8 bit Parity Check None, Odd, Even Stop Bit 1 bit, 1.5 bit, 2 bit Idle Level High, Low Baud (Selectable) 600/1200/2400/4800/9600/19200/38400/57600/115200 bit/s (Custom) 300 bit/s ~ 5,000,000 bit/s CAN Trigger Condition Start, Remote, ID, ID + Data, Error Source All channels ID STD (11 bit), EXT (29 bit) Data Format Hex Data Length 1~2 byte Baud Rate (Selectable) 5 k/10 k/20 k/50 k/100 k/125 k/250 k/500 k/800 k/1 M bit/s LIN Trigger Condition Break, Frame ID, ID+Data, Error Source All channels ID 1 byte Data Format Hex Data Length 1 ~ 2 byte Baud Rate (Selectable) 600/1200/2400/4800/9600/19200 bit/s Baud Rate (Custom) 300 bit/s ~ 20 kbit/s Serial Decoder I2C Decoder Signal SCL, SDA Address 7 bits, 10 bits Threshold -4.5 ~ 4.5 div List 1 ~ 7 lines SPI Decoder Signal SCL,MISO, MOSI, CS * NOTE 2 channel scopes can only use 2 signal identifiers Edge Select Rising, Falling Idle Level Low, High Bit Order MSB, LSB Threshold -4.5 ~ 4.5 div List 1 ~ 7 lines UART / RS232 Decoder Signal RX, TX Data Width 5 bit, 6 bit, 7 bit, 8 bit Parity Check None, Odd, Even Stop Bit 1 bit, 1.5 bit, 2 bit Idle Level Low, High Threshold -4.5 ~ 4.5 div List 1 ~ 7 lines CAN Decoder Signal CAN_H, CAN_L Source CAN_H, CAN_L, CAN_H-CAN_L Threshold -4.5 ~ 4.5 div List 1 ~ 7 lines LIN Decoder LIN Specification Package Revision Ver1.3, Ver2.0 Threshold -4.5 ~ 4.5 div List 1 ~ 7 lines

Source All channels, All channels in Zoom, Math, All References, History Number of Measurements Display 5 measurements at the same time Measurement Range Screen region, Gate region Measurement Parameters (38 Types) Vertical (Voltage) Max Highest value in input waveform Min Lowest value in input waveform Pk-Pk Difference between maximum and minimum data values Ampl Difference between top and base in a bimodal signal, or between max and min in an unimodal signal Top Value of most probable higher state in a bimodal waveform Base Value of most probable lower state in a bimodal waveform Mean Average of all data values Cmean Average of data values in the first cycle Stdev Standard deviation of all data values Cstd Standard deviation of all data values in the first cycle VRMS Root mean square of all data values Crms Root mean square of all data values in the first cycle FOV Overshoot after a falling edge; (base-min)/Amplitude FPRE Overshoot before a falling edge; (max-top)/Amplitude ROV Overshoot after a rising edge; (max-top)/Amplitude RPRE Overshoot before a rising edge; (base-min)/Amplitude Level@X the voltage value of the trigger point Horizontal( Time) Period Period for every cycle in waveform at the 50 % level, and positive slope Freq Frequency for every cycle in waveform at the 50 % level, and positive slope +Wid Width measured at 50 % level and positive slope -Wid Width measured at 50 % level and negative slope Rise Time Duration of rising edge from 10 – 90 % Fall Time Duration of falling edge from 90 – 10 % Bwid Time from the first rising edge to the last falling edge, or the first falling edge to the last rising edge at the 50 % crossing +Dut Ratio of positive width to period -Dut Ratio of negative width to period Delay Time from the trigger to the first transition at the 50 % crossing Time@Level Time from the trigger to each rising edge at the 50 % crossing. When Statistics is Off, it shows the time from the trigger to the last rising edge at the 50 % crossing. When Statistics is On, it shows the Current, Mean, Min, Max, Standard Deviation of time from the trigger to each rising edge at the 50 % crossing in multiple frames (number = Count). Delay Phase Calculate the phase difference between two edges FRR Time between the first rising edges of the two channels FRF Time from the first rising edge of channel A to the first falling edge of channel B FFR Time from the first falling edge of channel A to the first rising edge of channel B FFF Time from the first falling edge of channel A to the first falling edge of channel B LRR Time from the first rising edge of channel A to the last rising edge of channel B LRF Time from the first rising edge of channel A to the last falling edge of channel B LFR Time from the first falling edge of channel A to the last rising edge of channel B LFF Time from the first falling edge of channel A to the last falling edge of channel B Skew Time of source A edge minus time of nearest source B edge Cursors Manual : Time X1, X2, (X1-X2), (1/ΔT) Voltage Y1, Y2, (Y1-Y2) Track: Time X1, X2, (X1-X2) Statistics Current, Mean, Min, Max, Stdev, Count Counter Hardware 6 bit counter( channels are selectable) SPECIFICATIONS

Operation + , - , * , / , FFT , d/dt , ∫dt , √ FFT window Rectangular, Blackman, Hanning, Hamming, Flattop FFT display Full Screen, Split, Exclusive Number of Decoders 2 USB AWG Module (Not available on the T3DSO1102) Channel 1 Max. Output Frequency 25 MHz Sampling Rate 125 MSa/s Frequency Resolution 1 μHz Frequency Accuracy ± 50 ppm Vertical Resolution 14-bits AmplitudeRange -1.5 ~ +1.5 V (50 Ω) -3 ~ +3 V (High-Z) Waveform Type Sine, Square, Ramp, pulse, Noise, DC and 45 built-in waveforms Output impedance 50 Ω ± 2 % Protection Over-Voltage Protection, Current-Limiting Protection Sine Frequency 1 μHz ~ 25 MHz Offset Accuracy (10 kHz) ± (1 % * Offset Setting Value + 1 mVpp) Amplitude flatness (10 kHz, 5 Vpp) ± 0.3 dB SFDR DC ~ 1 MHz -60 dBc

1 MHz ~ 5 MHz -55 dBc

5 MHz ~ 25 MHz -50 dBc

HD DC ~ 5 MHz -50 dBc

5 MHz ~ 25 MHz -45 dBc

Frequency 1 μHz ~ 10 MHz Duty Cycle 1 % ~ 99 % Rise/Fall time < 24 ns (10 % ~ 90 %) Overshoot (1 kHz,1 Vpp, Typical) < 3 % (typical 1 kHz, 1 Vpp) Pulse Width > 50 ns Jitter < 500 ps + 10 ppm Ramp Frequency 1 μHz ~ 300 kHz Linearity (Typical) < 0.1 % of Pk-Pk (Typical, 1 kHz, 1 Vpp, 100 % Symmetry) Symmetry 0 % ~ 100 % (Adjustable) DC Offset range ± 1.5 V (50 Ω) ± 3 V (High-Z) Accuracy ± (|offset| * 1 % + 3 mV) Noise Bandwidth > 25 MHz (-3 dB) Arbitrary Wave Frequency 1 μHz ~ 5 MHz Wave Length 16 kpts Sampling Rate 125 MSa/s Waveform Entry EasyScope and USB-Stick

Digital Channels (Not available on the T3DSO1102) No. of Channels 16 Max. Sampling Rate 1 GSa/s Memory Depth 14 Mpts/CH Min. Detectable Pulse Width 4 ns Level Group D0~D7, D8~D15 Level Range -8 V ~ 8 V Logic Type TTL, CMOS, LVCMOS3.3, LVCMOS2.5, custom Skew[2] D0~D15: ±1 sampling interval Analog To Digital: ± (1 sampling interval +1 ns) I/O Standard USB Host, USB Device, LAN, Pass/Fail, Trigger Out Pass/Fail 3.3 V TTL Output Display (Screen) Display Type 7-inch TFT LCD Display Resolution 800 × 480 Display Color 24 bit Contrast (Typical) 500:1 Backlight 300 nit Range 8 x 14 divisions Display (Waveform) Display Mode Dot, Vector Persist Time Off, 1 Sec, 5 Sec, 10 Sec, 30 Sec, Infinite Color Display Normal, Color Screen Saver 1 min, 5 min, 10 min, 30 min, 1 hour, Off Language Simplified Chinese, Traditional Chinese, English, French, Japanese, Korean, German, Russian, Italian, Portuguese Environments Temperature Operating: 10 ~ +40 Non-operating: -20 ~ +60 Humidity Operating: 85 % RH, 40 Deg C, 24 hours Non-operating: 85 % RH, 65 Deg C, 24 hours Height Operating: ≤ 3000 m Non-operating: ≤ 15,266 m Electromagnetic Compatibility 2004/108/EC) Execution Standard EN 61326-1:2006 EN 61000-3-2:2006 + A2:2009, EN 61000-3-3:2008 Safety 2006/95/EC Execution Standard EN 61010-1:2010 / EN 61010-2-030:2010 Power Supply Input Voltage 100 ~ 240 VAC, CAT II, Auto selection Frequency 50/60/400 Hz Power 50 W Max Mechanical (T3DSO1104, T3DSO1204, T3DSO1202A, T3DSO1302A) Dimensions Length: 312 mm / Width: 132.6 mm / Height: 151 mm Weight N.W: 2.6 kg; G.W: 3.8 kg Mechanical (T3DSO1102) Dimensions Length: 312 mm / Width: 134 mm / Height: 150 mm Weight N.W: 2.5 Kg; G.W: 3.5 Kg All T3DSO1000 Series Oscilloscopes come with a 3 year return to Teledyne LeCroy warranty. SPECIFICATIONS

Probe Model Picture Description Passive Probes (T3DSO1102, T3DSO1104, T3DSO1202A, T3DSO1204) T3PP300 Passive Probe, Bandwidth: 300 MHz Passive Probes (T3DSO1302A) T3PP350 Passive Probe, Bandwidth: 350 MHz USB AWG Module T3DSO1000- FGMOD Output Sine, Square, Ramp, pulse, Noise, DC and 45 built-in waveforms. The arbitrary waveforms can be accessed and edited by the EasyScope PC software

Ordering information

Product Name T3DSO1102 100 MHz Two Channels T3DSO1104 100 MHz Four Channels T3DSO1202A 200 MHz Two Channels T3DSO1204 200 MHz Four Channels T3DSO1302A 350 MHz Two Channels Standard Accessories USB Cable -1 Quick Start -1 Passive Probe -4 / 2 Certification -1 Power Cord -1 Optional Accessories 16 Channel MSO Software T3DSO1000-MSO or T3DSO1000A-MSO (Not available for T3DSO1102)

16 Channel Logic Analyzer Lead T3DSO1000-LS

(Not available for T3DSO1102) (Requires T3DSO1000-MSO or T3DSO1000A-MSO Software) AWG Software (Not available for T3DSO1102) T3DSO1000-FG or T3DSO1000A-FG USB AWG Module Hardware T3DSO1000-FGMOD (Not available for T3DSO1102) (Requires T3DSO1000-FG or T3DSO1000A-FG) WIFI Software (Not available for T3DSO1102) T3DSO1000-WIFI or T3DSO1000A-WIFI Does not include the TP-Link TL-WN725N, see below For Wi-Fi support the T3DSO1000-WIFI/T3DSO1000A-WIFI option is required and the TP-Link TL-WN725N. The TP-Link TL-WN725N is NOT supplied as part of the T3DSO1000-WIFI/T3DSO1000A-WIFI option. The TP-Link TL-WN725N is not available through Teledyne Test Tools and should be purchased separately.

© 2019 Teledyne Test Tools is a brand and trademark of Teledyne LeCroy Inc. All rights reserved. Specifications, prices, availability and delivery subject to change without notice. Product brand or brand names are trademarks or requested trademarks of their respective holders. T3 stands for Teledyne Test Tools. teledynelecroy.com Company Profile Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively. Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. The Teledyne Test Tools brand extends the Teledyne LeCroy product portfolio with a comprehensive range of test equipment solutions. This new range of products delivers a broad range of quality test solutions that enable engineers to rapidly validate product and design and reduce time-to- market. Designers, engineers and educators rely on Teledyne Test Tools solutions to meet their most challenging needs for testing, education and electronics validation. Location and Facilities Headquartered in Chestnut Ridge, New York, Teledyne Test Tools and Teledyne LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. Teledyne Test Tools and Teledyne LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, education, military/aerospace, automotive/industrial, and telecommunications. Teledyne LeCroy (US Headquarters)

700 Chestnut Ridge Road

Chestnut Ridge, NY. USA 10977-6499 Phone: 800-553-2769 or 845-425-2000 Fax Sales: 845-578-5985 Phone Support: 1-800-553-2769 Email Sales: contact.corp@teledynelecroy.com Email Support: support@teledynelecroy.com Web Site: http://teledynelecroy.com/ World wide support contacts can be found at: https://teledynelecroy.com/support/contact World wide instrument service can be found at: https://teledynelecroy.com/support/service.aspx RoHS and WEEE information can be found at: https://teledynelecroy.com/support/rohs.aspx Teledyne LeCroy (European Headquarters) Teledyne LeCroy GmbH Im Breitspiel 11c D-69126 Heidelberg, Germany Phone: +49 6221 82700 Fax: +49 6221 834655 Phone Service: +49 6221 8270 85 Phone Support: +49 6221 8270 28 Email Sales: contact.gmbh@teledynelecroy.com Email Service: service.gmbh@teledynelecroy.com Email Support: tlc.t3.appsupport.eu@teledyne.com Web Site: http://teledynelecroy.com/ ABOUT TELEDYNE TEST TOOLS Distributed by: 23sept19