SV73157A

SV73157A SAVITECH | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

SV73157A www.savitech-ic.com SV73157A Low Voltage, Low Quiescent Current, 4.5Ω Dual SPDT Analog Switch v0.95 SAVITECH Corporation

SV73157A www.savitech-ic.com SV73157A Low Voltage, Low Quiescent Current, 4.5Ω Dual SPDT Analog Switch

Features

0 OFF ON

1 ON OFF

The SV73157A is a bidirectional, single-pole/double- throw (SPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V supply. It features high-bandwidth (300MHz) and low on- resistance (4.5Ω TYP), targeted on high-speed switching applications. SV73157A offers guaranteed on-resistance matching (0.14Ω TYP) between channels and on- resistance flatness over the signal range (2.3Ω TYP). This ensures excellent linearity and low distortion when switching high-speed signals.The SV73157A is available in a SC70-6 package.  Wide VCC operating range: 1.8V to 5.5V  Benchmark ESD protection: 6KV at HBM  Handle both digital and analog signals  Reliable Break-before-Make switching  Low switch-on resistance: 4.5Ω (typ.)  Excellent on-resistance matching: 0.14Ω (typ.)  Low charge injection  Low total harmonic distortion  Wide -3dB bandwidth: 300MHz  Low quiescent current: 1.6uA (typ.)  High impedance, power down control input  Rail-to-Rail signal handling  Over-voltage tolerance at control input: 6V  Available in SC70-6, Lead (Pb) free package

Description

Ordering Information

Ordering Code Operation range Package Packing SV73157A-06SC-TR3 -40°C ~ +85°C SC70-6L Tape & Reel, 3000 pcs NC VccGND INNO COM SV73157A

SV73157A www.savitech-ic.com Absolute Maximum Ratings Parameter Value Unit Vcc to GND, Supply Voltage, +6.5 V Input Voltage GND - 0.3 to (Vcc) +0.3 V Storage Temperature Range -65 to +150 °C Continuous current through V DD or GND 100 mA ESD Susceptibility: HBM 6000 V ESD Susceptibility: MM 400 V Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. T his is a stress rating only; functional operation of the de vice at these or any other conditions above those in dicated in the operational section of this specification is not imp lied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Caution This integrated circuit can be damaged by ESD if you don’t pay attention to ESD protection. SAVITECH recommends that all integrated circuits be handled with appropri ate precautions. Failure to observe proper handling a nd installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications

SV73157A www.savitech-ic.com

Electrical Characteristics

cc= +4.5V to +5.5V, GND = 0V, TA = -40°C to +85°C. Typical values are tested at Vcc = +5.0V, TA = +25°C, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS TEMP MIN TYP MAX UNITS DC CHARACTERISTICS Analog Signal Range D,IN,S -40°C ~ +85°C 0 Vcc V On-Resistance RON Vcc= 4.5V, VNO or VNC= 3.5V, ICOM= -10mA +25°C 4.5 Ω On-Resistance Match Between Channels ∆ R ON Vcc= 4.5V, VNO or VNC= 3.5V, ICOM= -10mA +25°C 0.14 Ω On-Resistance Flatness RFLAT(ON) Vcc= 4.5V, VNO or VNC= 1.0V, 2.0V, 3.5V, ICOM= -10mA +25°C 2.3 Ω Source OFF Leakage Current INC(OFF), INO(OFF) Vcc= 5.5V, VNO or VNC= 1.0V, 4.5V, VCOM= 4.5V, 1.0V -40°C ~ +85°C 0.1 µA Channel ON Leakage Current INC(ON), INO(ON), ICOM(ON) Vcc= 5.5V, VCOM= 1.0V, 4.5V, VNO or VNC = 1.0V, 4.5V, or floating -40°C ~ +85°C 0.1 µA Input High Voltage VINH -40°C ~ +85°C Vcc*0.6 V Input Low Voltage VINL -40°C ~ +85°C Vcc*0.4 V Input Leakage Current IIN Vcc = 5.5V, VIN = 0V or 5.5V -40°C ~ +85°C 0.1 µA Total Harmonic Distortion THD+N RL = 600Ω , C L = 200pF, f =20Hz to 20kHz -40°C ~ +85°C 0.0007 % DYNAMIC CHARACTERISTICS Turn-On Time tON VNO or VNC= 5.0V, VIH = 1.5V, VIL = 0V, RL= 300Ω , C L= 35pF +25°C 5.5 ns Turn-Off Time tOFF 10 ns Break-Before-Make Time Delay tD VNO1 or VNC1= VNO2 or VNC2 = 3.0V, RL= 300Ω , C L= 35pF +25°C 4.5 ns Off Isolation OISO RL = 50Ω , C L = 5pF, Signal = 0dBm f = 10MHz +25°C -52 dB f = 1MHz +25°C -73 –3dB Bandwidth BW Signal = 0dBm +25°C 300 MHz Channel ON Capacitance CNC(ON), CNO(ON), CCOM(ON) f = 1MHz +25°C 14 pF POWER REQUIREMENTS Power Supply Range Vcc -40°C ~ +85°C 1.8 5.5 V Power Supply Current Icc Vcc = +5.5V, VIN = 0V or Vcc -40°C ~ +85°C 1.6 µA Specifications are subject to change without notice.

SV73157A www.savitech-ic.com cc = +2.7V to +3.6V, GND = 0V, TA = -40°C to +85°C. Typical values are tested at Vcc = +3.0V, TA = +25°C, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS TEMP MIN TYP MAX UNITS ANALOG SWITCH Analog Signal Range VNO, VNC, VCOM -40°C ~ +85°C 0 Vcc V On-Resistance RON Vcc= 2.7V, VNO or VNC= 1.5V, ICOM= -10mA +25°C 6.5 Ω On-Resistance Match Between Channels ∆ R ON Vcc= 2.7V, VNO or VNC= 1.5V, ICOM= -10mA +25°C 0.14 Ω On-Resistance Flatness RFLAT(ON) Vcc= 2.7V, VNO or VNC= 1.0V, 1.5V, 2.0V, ICOM= -10mA +25°C 3 Ω Source OFF Leakage Current INC(OFF), INO(OFF) Vcc= 3.6V, VNO or VNC= 0.3V, 3.3V, VCOM= 3.3V, 0.3V -40°C ~ +85°C 0.1 µA Channel ON Leakage Current INC(ON), INO(ON), ICOM(ON) Vcc= 3.6V, VCOM= 0.3V, 3.3V, VNO or VNC = 0.3V, 3.3V, or floating -40°C ~ +85°C 0.1 µA DIGITAL INPUTS Input High Voltage VINH -40°C ~ +85°C Vcc*0.6 V Input Low Voltage VINL -40°C ~ +85°C Vcc*0.4 V Input Leakage Current IIN Vcc = 3.6V, VIN = 0V or 3.6V -40°C ~ +85°C 0.1 µA DYNAMIC CHARACTERISTICS Off Isolation OISO RL = 50Ω , C L = 5pF, Signal = 0dBm f = 10MHz +25°C -52 dB f = 1MHz +25°C -73 –3dB Bandwidth BW Signal = 0dBm +25°C 300 MHz Channel ON Capacitance CNC(ON), CNO(ON), CCOM(ON) f = 1MHz +25°C 5 pF Total Harmonic Distortion THD+N RL = 600Ω , C L = 200pF, f =20Hz to 20kHz +25°C 0.001 % POWER REQUIREMENTS Power Supply Range Vcc -40°C ~ +85°C 1.8 5.5 V Power Supply Current Icc Vcc = 5.5V, VIN = 0V or Vcc -40°C ~ +85°C 1.6 µA Specifications are subject to change without notice.

SV73157A www.savitech-ic.com Typical Performance Characteristics On-Frequency Response Vcc = +5V On-Frequency Response Vcc = +3V Supply Current vs. Vcc Vin = Vcc Supply Current vs. Vcc Vin = GND Total Harmonic Distortion plus Noise (THD+N) vs. Frequency

SV73157A www.savitech-ic.com SC70-6 MECHANICAL DATA Symbol Dimension in MM Dimension in Inch Min. Max. Min. Max. A 0.900 1.100 0.035 0.043 A1 0.000 0.100 0.000 0.004 A2 0.900 1.000 0.035 0.039 b 0.150 0.350 0.006 0.014 c 0.080 0.150 0.003 0.006 D 2.000 2.200 0.079 0.087 E 1.150 1.350 0.045 0.053 E1 2.150 2.450 0.085 0.096 e 0.650TYP 0.026TYP e1 1.200 1.400 0.085 0.096 L 0.525REF 0.021REF L1 0.260 0.460 0.010 0.018 Θ 0* 8* 0* 8*

SV73157A www.savitech-ic.com Information furnished is believed to be accurate and reliable. However, SAVITECH assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SAVITECH. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information prev iously supplied. SAVITECH products are not authorized for use as critical components in life support devices or systems without express written approval of SAVITECH. The SAVITECH logo is a registered trademark of Savitech Corporation. All other names are the property of their respective owners © 2011 Savitech Corporation - All Rights Reserved