SV7030 SAVITECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

SV7030 www.savitech-ic.com SV7030 Low Power, Low Attenuation, High-Speed USB 2.0 (480 Mbps) Switch Revision v0.95a SAVITECH Corporation

SV7030 www.savitech-ic.com NAME DESCRIPTION OE Active LOW, Output enable S Select input D+, D-, Data com port HSDn+ HSDn- I/O for USB data path (port 1 and port 2) 9 8 7 6 10 5 1 2 3 4 SEL OE Function X H Hi-Z L L D+, D- = HSD1n H L D+, D- = HSD2n SV7030 Low Power, Low Attenuation, High-Speed USB 2.0 (480 Mbps) Switch

Features

 Wide operating voltage range, +2.5V to +5.5V  USB 1.1 (full speed) and USB 2.0 (high speed) compliant  Fast switching time tON: 25 nS tOFF: 12nS  -42dB cross-talk at 240MHz  -32dB off-isolation at 240MHz  Ultra-Wide Bandwidth: -3dB BW = 750MHz  Typical RON is 7 Ω at +3.0V  Extreme low signal propagation delay

Description

T h e S V 7 0 3 0 i s a c o s t - e ff e ctive, low po wer consumption, high-speed USB2.0 switch targeting o n h a n d s e t , p o r t a b l e a n d d i g i t a l c o n s u m e r applications. Its bandwidth is much higher than the high- speed USB 2.0 (480MHz) requirement that makes it ideal for industry standard full-speed USB1.1 and high- speed USB2.0 applications. It also features low channel cross-talk and high off-isolation that allows low attenuation switching. The SV7030 is acting as a multiplex that multiplexes differential outputs from one of two outputs of the SV7030. Pin Configuration Pin Description OE HSD1- HSD2- D- VDD OE 8 VDD 9 S 10 HSD1- HSD2- 7 6 5 D- 3 D+ S HSD1+ HSD2+ D+ HSD1+ HSD2+ WQFN-10 WQFN-10 Block Diagram HSD1+ HSD2+ HSD1- HSD2- S Control OE Truth Table GNDGND

10 VDD

S HSD1+ HSD2+ HSD1- HSD2- OE MSOP-10

Ordering Information

Ordering Code Package Packing SV7030-10WY-TR3 WQFN-10 1.8 mm x 1.3 mm Tape & Reel, 3000 pcs SV7030-10WZ-TR3 WQFN-10 2.0mm x 1.3 mm Tape & Reel, 3000 pcs SV7030-10MP-TR3 MSOP-10 Tape & Reel, 3000 pcs

SV7030 www.savitech-ic.com Absolute Maximum Ratings Parameter Value Unit VDD to GND, Supply Voltage, 6 V Input Voltage GND - 0.3 to ( VDD) +0.3 V Storage Temperature Range -65 to +150 °C Continuous current through V DD or GND 100 mA ESD Susceptibility: HBM 8000 V ESD Susceptibility: MM 400 V Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at t hese or any other conditions above those indicated in the operational section of this specification is not implied . Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Caution This integrated circuit can be damaged by ESD if you don’t pay attention to ESD protection. SAVITECH recommends that all integrated circuits be handled with app ropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

SV7030 www.savitech-ic.com

Electrical characteristics

+25°C, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS TEMP MIN TYP MAX UNITS ANALOG SWITCH Analog I/O Voltage (HSD1+, HSD1-, HSD2+, HSD2-) VIS -40℃ to +85℃ 0 VDD V On-Resistance RON VDD = 3.0V, VIS = 0V to 0.4V, ID =8mA +25℃ 7 Ω On-Resistance Match Between Channels ∆ R ON VDD = 3.0V, VIS = 0V to 0.4V, ID =8mA +25℃ 0.1 0.5 Ω On-Resistance Flatness RFLAT(ON) VDD = 3.0V, VIS = 0V to 1.0V, ID =8mA +25℃ 0.5 1 Ω Power Off Leakage Current (D+, D-) IOFF VDD = 0V, VD = 0V to 3.6V, VS , VOE = 0V or 3.6V -40℃ to +85℃ 1 µA Increase in I+ per Control Voltage ICCT VDD = 3.6V, VS or VOE = 2.6V -40℃ to +85℃ 2 µA Source Off Leakage Current IHSD2(OFF),IHSD1(OFF) VDD = 3.6V, VIS = 3.3V/ 0.3V, VD =0.3V/ 3.3V -40℃ to +85℃ 1 µA Channel On Leakage Current IHSD2(ON),IHSD1(ON) VDD = 3.6V, VIS = 3.3V/ 0.3V, VD =3.3V/ 0.3V or floating -40℃ to +85℃ 1 µA DIGITAL INPUTS Input High Voltage VIH -40℃ to +85℃ 1.6 V Input Low Voltage VIL -40℃ to +85℃ 0.5 V Input Leakage Current IIN VDD = 3.0V, VS , V OE = 0V or VDD -40℃ to +85℃ 1 µA DYNAMIC CHARACTERISTICS Turn-On Time tON VIS = 0.8V, RL = 50Ω , CL = 10pF +25℃ 25 ns Turn-Off Time tOFF +25℃ 12 ns Break-Before-Make Time Delay tD VIS = 0.8V, RL = 50Ω , CL = 10pF +25℃ 5 ns Propagation Delay tPD RL = 50Ω , C L = 10pF +25℃ 0.25 ns Off Isolation OISO Signal = 0dBm, RL = 50Ω , f =240MHz +25℃ -32 dB Channel-to-Channel Crosstalk XTALK Signal = 0dBm, RL = 50Ω , f =240MHz +25℃ -42 dB -3dB Bandwidth BW Signal = 0dBm, RL = 50Ω , CL= 5pF +25℃ 750 MHz Channel-to-Channel Skew tSKEW RL = 50Ω , C L = 10pF +25℃ 0.02 ns Charge Injection Select Input to Common I/O Q VG = GND, CL = 1.0nF, RG = 0Ω , Q = C L x VOUT +25℃ 10 pF HSD+, HSD-, D+, D- ON Capacitance CON +25℃ 4.5 pF POWER REQUIREMENTS Power Supply Range VDD -40℃ to +85℃ 2.5 5.5 V Power Supply Current ICC VDD = 3.0V, VS , VOE = 0V or VDD c -40℃ to +85℃ 1 µA Specifications are subject to change without notice.

SV7030 www.savitech-ic.com Crosstalk (dB)Off Isolation (dB) Crosstalk Crosstalk -20 -40 -60 -80 -100 1 10 100 1000 Frequency (MHz) Off Isolation Off Isolation -20 -40 -60 -80 -100 1 10 100 1000 Frequency (MHz)

SV7030 www.savitech-ic.com 10L-WQFN MECHANICAL DA T A Symbol Dimension in MM Min. Mom. Max. A 0.55 0.60 0.65 A1 0.00 --- 0.05 A2 0.423 --- 0.523 b 0.15 0.25 0.25 D 1.75 1.8 1.85 E 1.25 1.3 1.35 e --- 0.4BSC --- L 0.35 0.40 0.45 L1 0.35 0.40 0.45 L2 0.45 0.50 0.55 Θ -12 --- 0 ccc --- 0.08 --- M --- --- 0.05 Burr 0.00 0.03 0.06

SV7030 www.savitech-ic.com 10L-WQFN MECHANICAL DA T A Symbol Dimension in MM Min. Mom. Max. A 0.55 0.60 0.65 A1 0.00 --- 0.05 A2 0.423 --- 0.523 b 0.20 0.25 0.30 b1 0.15 0.20 0.25 b2 0.25 0.30 0.35 D 1.95 2.00 2.05 E 1.25 1.30 1.35 e --- 0.50BSC --- L 0.20 0.25 0.30 L1 0.425 0.475 0.525 Θ -12 --- 0 ccc --- 0.08 --- M --- --- 0.05 Burr 0.00 0.03 0.06

SV7030 www.savitech-ic.com MSOP-10 MECHANICAL DA T A Symbol Dimension in MM Dimension in Inch A1 0.05 0.15 0.002 0.006 e 0.50BASIC 0.020 BASIC JEDEC *Notes: Dimension “D” does not include mold flash, Protrusions or gate burrs. Mold flash, tie bar burrs and fate burrs shall not exceed 0.12 MM (0.05 Inch) per end dimension “E1” dose not include interlead flash. Interlead flash shall not exceed 0.25MM (0.010 Inch) per side.

SV7030 www.savitech-ic.com Information furnished is believed to be accurate and reliable. However, SAVITECH assumes no responsibility for the consequencesof use of such information nor for any infringement of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SAVITECH. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SAVITECH products are not authorized for use as critical components in life support devices or systems without express written approval of SAVITECH. The SAVITECH logo is a registered trademark of Savitech Corporation. All other names are the property of their respective owners © 2011 Savitech Corporation - All Rights Reserved