SV5104C

SV5104C SAVITECH | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

www.savitech-ic.com SV5104C Low Power, 5th-order 8MHz filter, Quality Enhanced, Standard Definition Video Driver Revision v1.1a SAVITECH Corporation

www.savitech-ic.com SV5104C Low Power, 5th-order 8MHz filter, Quality Enhanced, Standard Definition Video Driver

Features

 Low power, low voltage design  Operating voltage from +2.7V to +5.5V  Low quiescent current: 6mA  High PSRR: 62dB  No compromised HBM 8KV ESD protection  5th-order filter integrated : 8MHz  High-performance, +6dB-gain driver design  Support driving single video cable or 150Ω load and two video cables or 75Ω loads  Rail-to-Rail output  Transparent input clamping  Versatile AC- or DC-coupled configurations at inputs and outputs  PCB space saving design in green SC70-5 package.

Description

The SV5104C are cost-effective, Standard Definition (SD) Video Drivers with enhanced video quality. With state-of-art low voltage and low power design, makes it ideal for low power CVBS-/SD- video system design. It features 5th-order filter and +6dB driver designed for replacing traditional 2nd~3th-order passive LC filtering solution that improves output video quality and reduces PCB space. The SV5104C supports driving single video cable or 150Ω load and two video cables or 75Ω loads. The 8KV ESD protection design also helps to reduce ESD protection cost, but still provides robust ESD protection and reduces any potential system reliability and safety issues from ESD threats. Block Diagram IN Transparent Clamp Filter 5th, 8MHz +6dB OUT

Ordering Information

Order Codes Operation Range Package Packing SV5104C-06SC-TR3 -40°C, +85°C SO70-6 Tape & Reel, 3000pcs SC70-5

www.savitech-ic.com NAME FUNCTION DISALBE Shutdown input OUT Filter output channel IN Video input channel NC No connect GND Ground VCC Power supply Pin Configuration (Top view) Pin Description Absolute Maximum Ratings Parameter Value Unit Vcc to GND, Supply Voltage, 6 V Input Voltage GND - 0.3 to (Vcc) +0.3 V Storage Temperature Range -65 to +150 °C Continuous current through V DD or GND 100 mA ESD Susceptibility: HBM 8000 V ESD Susceptibility: MM 400 V Stresses above those listed under Absolute Maximum R atings may cause permanent damage to the device. Th is is a stress rating only; functional operation of the devic e at these or any other conditions above those indica ted in the operational section of this specification is not imp lied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Caution This integrated circuit can be damaged by ESD if you don’t pay attention to ESD protection. SAVITECH reco mmends that all integrated circuits be handled with appropriate p recautions. Failure to observe proper handling and i nstallation procedures can cause damage.ESD damage can range from subtle performance degradation to complete device fail ure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. SV5104C IN GND VCC OUT NC DISABLE

www.savitech-ic.com At RL = 150Ω connected to GND, VIN = 1Vpp, and CIN = 0.1μF, all outputs AC coupled with 220μF, referenced to 400kHz, unless otherwise noted. Electrical characteristics: Standard-Definition Filte r Driver V cc = +4.2V, GND = 0V, TA = -40°C to +85°C. RL = 150Ω connected to GND, VIN = 1Vpp, and CIN = 0.1μF, all outputs AC coupled with 220μF, referenced to 400kHz. Typical values are tested at Vcc = +4.2V, TA = +25°C unless otherwise noted. P ARAMETER CONDITIONS TEMP MIN TYP MAX UNITS INPUT CHARACTERISTICS Output Level Shift Voltage (VOLS) VIN = 0V , no load +25°C 386 572 mV -40°C to +85°C 670 Input Voltage Clamp (VCLAMP) IIN = -3.5mA +25°C -220 -104 mV Clamp Charge Current VIN = VCLAMP -100mV +25°C -600 -470 uA Voltage Gain ( AV) RL = 150 Ω +25°C 5.7 6 6.4 dB OUTPUT CHARACTERISTICS Output Voltage High Swing VIN = 3V , RL = 150Ω to GND +25°C 4.3 4.74 V -40°C to +85°C 4.2 POWER SUPPLY Operating Voltage Range +25°C 2.7 5.5 V Power Supply Rejection Ratio (PSRR) VCC = 3.5V to 5.0V +25°C 62 dB Quiescent Current (IQ) VIN = 0V +25°C 6 mA Specifications are subject to change without notice. P ARAMETER CONDITIONS TEMP MIN TYP MAX UNITS AC PERFORMANCE -3dB Bandwidth RL = 150 Ω +25°C 8 MHz -0.1dB to -1dB Bandwidth RL = 150 Ω +25°C 5.8 MHz Filter Response (Normalized Gain) fIN = 27MHz +25°C -30 dB Slew Rate 2V Output Step, 80% to 20% +25°C 35 V/√s DifferentialGain (DG) PAL AC coupled +25°C 0.43 % Differential Phase (DP) PAL AC coupled +25°C 0.94 % Group Delay Variation (D/DT) Difference between 400kHz and 5.8MHz +25°C 12 ns Fall Time 2V Output Step, 80% to 20% +25°C 26 ns Rise Time 2V Output Step, 80% to 20% +25°C 20 ns Specifications are subject to change without notice.

www.savitech-ic.com Group Delay (ns) Phase (degree) Power rel. to 0dB Typical Performance Characteristics At VCC= 5V, T A = +25°C, RL = 150Ω, all outputs AC coupled with 220uF, unless otherwise noted. Gain Response 5V -12 -20 -28 -36 -44 -52 0.1 1 10 100 Frequency(MHz) PhaseResponse5V 200 150 100 -50 -100 -150 -200 0.1 1 10 100 Frequency&(MHz)& Group DelayResponse5V 0.1 1 10 100 Frequency&(MHz)&

www.savitech-ic.com Output Voltage (V) Output Voltage (V) Typical Performance Characteristics VOH(Volts)vs.OutputCurrent(Amps) 5.5 4.5 3.5 2.5 0 5 10 15 20 25 30 35 OutputCurrent (mA) VOL(Volts)vs.OutputCurrent(Amps) 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 5 10 15 20 25 30 35 OutputCurrent(mA)

www.savitech-ic.com SC70-6 MECHANICAL DA T A

SV7321LV, SV7358LV, SV7324LV www.savitech-ic.com Information furnished is believed to be accurate and reliable. However, SAVITECH assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SAVITECH. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SAVITECH products are not authorized for use as critical components in life support devices or systems without express written approval of SAVITECH. The SAVITECH logo is a registered trademark of Savitech Corporation. All other names are the property of their respective owners © 2011 Savitech Corporation - All Rights Reserved