STP-18-15-M1-C-1.2 ERAVANT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

STP-18-15-M1-C-1.2 www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.1 WR-15 Compact Micrometer Driven Phase Shifter STP-18-15-M1-C-1.2 is a WR-15 compact micrometer driven phase shifter that covers the frequency range from 50 to 75 GHz. The phase shifter is an ideal piece of equipment in waveguide systems where broadband phase shifting is required. The phase shifter exhibits a 0.3 dB typical insertion loss and an adjustable phase range of up to 180 degrees. Electrical Specifications: Mechanical Specifications: Parameter Minimum Typical Maximum Frequency Range 50 GHz 75 GHz Insertion Loss 0.3 dB Phase Shifting Range 0° 180° Return Loss 20 dB Power Handling 100 mW (CW) Specification Temperature +25°C Operating Temperature -40°C +85°C Item Specification RF Ports WR-15 Waveguide with UG-385/U Anti-Cocking Flange Setting Type Micrometer Head Micrometer Pitch 0.5mm Micrometer Resolution 0.01mm Insertion Length 1.20” Material Aluminum Finish Gold Plated Weight 3.5 Oz Outline TA-MV-A-1.2 ECCN EAR99

FEATURES

  • Full Band Coverage
  • Compact Size
  • High Resolution Micrometer
  • Low Insertion Loss

APPLICATIONS

  • Test Lab
  • Instrumentations
  • System Integration SUPPLEMENTAL DETAILS

STP-18-15-M1-C-1.2 www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.1 Mechanical Outline: Unless otherwise specified, all dimensions are in inches [millimeters]) NOTE:

  • On condition that test data is provided it is collected from a sample lot. Actual data may vary slightly from unit to unit. All testing is performed under +25 °C room temperature.
  • On condition that simulated test data is provided, actual measured data may slightly vary.
  • Eravant reserves the right to change the information presented without notice. CAUTION:
  • RF power should never exceed 100 mW.
  • Forcing the micrometer down after encountering resistance may damage the resistive sheet inside. This will cause permanent performance degradation and decrease the long-term stability and repeatability of the device.
  • If a waveguide is present, any foreign objects in the waveguide will cause performance degradation and may damage or destroy the unit.
  • Any foreign objects in the antenna will cause performance degradation and possible device damage. SCH-06004-S1 is highly recommended. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended

STP-18-15-M1-C-1.2 www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.1 -60 -50 -40 -30 -20 -10 -2.5 -1.5 -0.5 50 55 60 65 70 75 Return Loss (dB) Insertion Loss (dB) Frequency (GHz) Typical Measured Performance vs Frequency Insertion Loss Return Loss