STA-30-05-M3-2 ERAVANT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

STA-30-05-M3-2 Rev 1.0 www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com Page | 1 SAGE Millimeter, Inc. G-Band Level Setting Attenuator Copyright © 2018 by SAGE Millimeter, Inc. Description: Model STA-30-05-M3-2 is a G band level setting attenuator that covers the frequency range of 140 to 220 GHz. The attenuator has a micrometer dial which allows for repeatable settings. The level setting attenuator is an ideal piece of equipment in waveguide systems where broadband level setting is required. The attenuator exhibits 1.5 dB nominal insertion loss and up to 30 dB nominal attenuation. Features:

  • Full Band Coverage
  • Low Cost
  • Convenient Level Setting Applications:
  • Test Lab
  • Instrumentations
  • Manual Test Set Electrical Specifications: Parameter Minimum Typical Maximum Frequency 140 GHz 220 GHz Insertion Loss 1.5 dB Attenuation Range 30 dB Return Loss 16 dB Power Handling 0.3 W (CW) Specification Temperature +25 ˚C Operating Temperature -40 ˚C +85 ˚C Mechanical Specifications: Item Specification RF Input WR-05 Waveguide with UG-387/U-M Flange RF Output WR-05 Waveguide with UG-387/U-M Flange Setting Micrometer Head Finish Gold Plated Waveguides Weight 2.8 Oz Insertion Length 2.50” Outline TA-MG-L1

STA-30-05-M3-2 Rev 1.0 www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com Page | 2 SAGE Millimeter, Inc. G-Band Level Setting Attenuator Copyright © 2018 by SAGE Millimeter, Inc. Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) Note:

  • SAGE Millimeter, Inc. reserves the right to change the information presented without notice. Caution:
  • Exceeding absolute maximum ratings shown will damage the device.
  • Any foreign objects in the waveguide will cause performance degradation and may damage the device.