SK16-0521836560-SFSF-A8 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Final Rev 1.2 SP16T PIN Switch with TTL Driver, Absorptive, 0.5 to 18 GHz SK16-0521836560-SFSF-A8 is an absorptive PIN diode based, single pole, sixteen throw switch with a TTL driver that operates between 0.5 and 18 GHz. The switch requires a separate -5 V and +5 V biasing in addition to the 4-Bit TTL control. This model offers in-line 16 output ports, typical 6.5 dB insertion loss, and 60 dB minimum isolation with a typical switching speed of 50 nanoseconds. The switch has female SMA connectors for all RF ports and Micro-D15 Male connector for bias and TTL control. Electrical Specifications: Mechanical Specifications: Parameter Minimum Typical Maximum Frequency Range 0.5 GHz 18 GHz Insertion Loss 6.5 dB 8.0 dB Isolation 60 dB Return Loss 8 dB 13 dB Input RF Power +23 dBm Bias Current (Vcc = ±5 V) 750/50 mA Control TTL Switching Speed 50 ns Switch Type Absorptive Specification Temperature +25°C Operating Temperature 0°C +50°C Item Specification RF Ports SMA (F) Bias and Control Port Micro D-15 Male Connector Case Material Aluminum Finish Gold Plated Weight 7.1 Oz Outline K16-AC-Z2 ECCN EAR99
FEATURES
- Low Insertion Loss
- High Isolation
- Absorptive
APPLICATIONS
- Automatic Test Equipment
- Switching Network SUPPLEMENTAL DETAILS
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Final Rev 1.2 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) -60 -50 -40 -30 -20 -10 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0.5 3 5.5 8 10.5 13 15.5 18 Return Loss (dB) Insertion Loss and Isolation (dB) Frequency (GHz) Insertion Loss and Return Loss vs. Frequency Bias: ±5 VDC/560 mA Insertion Loss Isolation Input Return Loss Output Return Loss
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Final Rev 1.2 NOTE:
- On condition that test data is provided it is collected from a sample lot. Actual data may vary slightly from unit to unit. All testing is performed under +25 °C room temperature.
- Eravant reserves the right to change the information presented without notice. CAUTION:
- Exceeding absolute maximum ratings shown will damage the device.
- The device is static sensitive. Always follow ESD rules when working with the device.
- Reversing polarity will destroy the device. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended.