STC-N15-05-S1 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.3 G-Band Full Waveguide Band Down-Converter STC-N15-05-S1 is a G-Band down-converter that converts millimeterwave signals from a frequency range of 140 to 220 GHz to the baseband at 1.6 GHz. The down-converter requires 11.67 to 18.33 GHz at +3 dBm input power as its LO. The down-converter has low harmonic levels and excellent gain flatness, making it a good candidate to extend low frequency test equipment for millimeterwave testing purposes. Electrical Specifications: Mechanical Specifications: Parameter Minimum Typical Maximum RF Input Frequency 140 GHz 220 GHz IF Frequency Output 10 MHz 1.6 GHz 18 GHz LO Input Frequency 11.67 GHz 18.33 GHz LO Power +3 dBm +20 dBm Conversion Loss 18 dB Harmonic Suppression 20 dB RF Input Power Damage Level +13 dBm Power Supply (AC Adapter Provided) 100 VAC 240 VAC Specification Temperature +25 °C Operating Temperature 0 °C +50 °C Item Specification RF Port WR-05 Waveguide with UG-387/U-M Precision Anti- Cocking Flange LO Port SMA (F) IF Port SMA (F) DC Bias Port 2.5 mm DC Jack (AC-to-DC power converter included) DC Bias Switch On-Off Latching Switch with Indicator Light Enclosure Material Black Anodized Aluminum Weight 2.3 lbs Outline TC-G-A ECCN EAR99
FEATURES
- Full Band Coverage
APPLICATIONS
- Test Lab
- Instrumentations
- Auto Test Set SUPPLEMENTAL DETAILS
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.3 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) -50 -40 -30 -20 -10 140 150 160 170 180 190 200 210 220 Conversion Loss (dB) Frequency (GHz) Conversion Loss vs. Frequency IF = 1.6 GHz IF = 0.1 GHz IF = 18 GHz
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.3 NOTE:
- On condition that test data is provided it is collected from a sample lot. Actual data may vary slightly from unit to unit. All testing is performed under +25 °C room temperature.
- On condition that simulated test data is provided, actual measured data may slightly vary.
- Eravant reserves the right to change the information presented without notice. CAUTION:
- If a waveguide is present, any foreign objects in the waveguide will cause performance degradation and may damage or destroy the unit. Torque wrench model SCH-06004-S1 is highly recommended.
- For 1.35 mm, 1.85 mm, 2.4 mm, 2.92 mm, and SMA connectors proper torque should be recommended.