STO-20355315-R-E1 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Final Rev 1.0 Coaxial VNA Frequency Extender Receiver (Rx) Module, 5 to 13.75 GHz Input STO-20355315-R-E1 is a compact coaxial vector network analyzer (VNA) frequency extender receiver (RX) module that extends lower frequency VNA signals to 20 to 55 GHz. It is compatible with modern vector network analyzers such as Rohde & Schwarz ZNA, Anritsu VectorStar™, Keysight PNA-X Series, and Copper Mountain CobaltFx. The VNA needs dual sources to be extended. This frequency extender can be used to measure one-path transmission (S21 or S12) through DUT when paired with a compatible transmitter. When Rx module is paired with Tx/Rx module, the setup can be used to measure reflection at input of DUT and transmission through DUT. An AC to DC Power adapter is included. The Eravant calibration kit (STQ-TO-VFVM-U3- CKIT1) and Wave-Glide™ Rail System (STQ-TL-RW-S10-M1) are highly recommended to complete the coaxial VNA test set. VNA extender is packaged individually in a rugged equipment box with additional hardware and tools. Electrical Specifications: *Measured with compatible Tx/Ref or Tx/Rx module. Parameter Minimum Typical Maximum Frequency Range 20 GHz 55 GHz Test Port Input Power (Damage) +25 dBm Dynamic Range* @ 10 Hz BW 100 dB 120 dB Test Port Match 10 dB LO Source Input Frequency (RF±IF) 5 GHz 13.75 GHz LO Source Input Power -6 dBm -3 dBm 0 dBm IF Frequency Range 10 MHz 1000 MHz Multiplication Factor 4 Specification Temperature +20°C +30°C Operating Temperature 0°C +50°C ECCN EAR99
FEATURES
- Dynamic Range of 120 dB
- AC Power Input: 100 to 240 VAC
APPLICATIONS
- VNA Frequency Extension
- OTA Measurements
- Test Lab Instrumentation Recommended Pairing
- Cal Kit: STQ-TO-VFVM-U3-CKIT1
- Waveguide-Glide™ Rail System
- Cable: SCW-SMSM040-F1-A-PM Recommended Pairing
- VNA Extender Configuration Guide
- VNA Extenders and Cal Kits
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Final Rev 1.0 Mechanical Specifications: Included Components: Simplified Block Diagram Item Specification Test Port 1.85 mm (F) LO Source Input Ports SMA (F) IF Measure Port SMA (F) DC Power Receptacle LEMO EGG.0B.304.CLL Finish Black Anodized Weight (Per Module) 2.1 lbs. Size (Without Adjustable Feet) 5.00” (L) x 3.75” (W) x 1.90” (H) Outline TO-RC Item Eravant Model Number Quantity SMA Connector Torque Wrench SCH-08008-S1 1 AC-to-DC Power Adapter STU-110006005-HF 1 Connecting Cables are not included. Eravant coaxial cable, model SCW-SMSM040-F1-A-PM, is highly recommended. Four (4) cables are required to connect this module with VNA
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Final Rev 1.0 -140 -130 -120 -110 -100 -90 -80 15 20 25 30 35 40 45 50 55 60 Dynamic Range (dB) Frequency (GHz) Dynamic Range vs. Frequency -40 -30 -20 -10 20 25 30 35 40 45 50 55 Port Match (dB) Frequency (GHz) Port Match vs. Frequency
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Final Rev 1.0 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) NOTE:
- To complete a frequency extender test set, pair this Rx module with a compatible Tx/Ref or Tx/Rx module listed in VNA Frequency Extenders page.
- Eravant reserves the right to change the information presented without notice. CAUTION:
- Exceeding absolute maximum ratings shown will damage the extenders.
- Any foreign objects in the waveguide will cause performance degradation or damage the device. pounds (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended.