STO-1220315-T-E1 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Advanced Rev 1.6 E-Band VNA Frequency Extender, Transmit (Tx/Ref) Module, 10 to 15 GHz Input STO-1220315-T-E1 is a compact E-Band vector network analyzer (VNA) frequency extender transmit (Tx/Ref) module that extends lower frequency VNA signals to 60 to 90 GHz. It is compatible with modern vector network analyzers such as Rohde & Schwarz ZNA, Anritsu VectorStar™, Keysight PNA-X Series, and Copper Mountain CobaltFx. The VNA needs dual sources to be extended. This frequency extender, when paired with compatible receiver, can achieve a dynamic range up to 120 dB and can be used to measure one-path transmission (S21 or S12) through DUT. An AC to DC Power adapter and Proxi-Flange™ Contactless Flanges (STQ-WG-12010-FB-CF and STQ-WG-12025- FB-CF), are included. The Eravant calibration kit (STQ-TO-12-S1-CKIT1) and Wave-Glide™ Rail System (STQ-TL-RW-S10-M1) are highly recommended to complete the E-Band VNA test set. VNA extender is packaged individually in a rugged equipment box with additional hardware and tools. Electrical Specifications: *Measured with compatible Rx module. Parameter Minimum Typical Maximum Frequency Range 60 GHz 90 GHz Test Port Output Power 15 dBm Dynamic Range** @ 10 Hz BW 100 dB 120 dB Test Port Match 20 dB RF Source Input Frequency 10 GHz 15 GHz RF Source Input Power 0 dBm +3 dBm +6 dBm LO Source Input Frequency (RF±IF) 10 GHz 15 GHz LO Source Input Power 0 dBm +3 dBm + 6 dBm IF Frequency Range 10 MHz 1000 MHz Multiplication Factor 6 Specification Temperature +20°C +30°C Operating Temperature -0°C +50°C ECCN EAR99
FEATURES
- Full Band Coverage
- Dynamic Range of 120 dB
- AC Power Input: 100 to 240 VAC
APPLICATIONS
- VNA Frequency Extension
- OTA Measurements
- Test Lab System RECOMMENDED PAIRINGS
- Cal Kit: STQ-TO-12-S1-CKIT1
- Waveguide Quick Connects
- Cable: SCW-SMSM040-F1-A-PM RECOMMENDED RESOURCES
- Contactless WG Flange & mmW- THz Test Setup
- VNA Extender Configuration Guide
- VNA Extenders & Cal Kits
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Advanced Rev 1.6 Mechanical Specifications: Included Components: Connecting cables are not included. Eravant coaxial cable, model SCW-SMSM040-F1-A-PM, is highly recommended. Three (3) cables are required to connect this module with VNA. Simplified Block Diagram Item Specification Test Port WR-12 Waveguide with UG-387/U Precision Anti-Cocking Flange RF and LO Source Input Ports SMA (F) IF Reference Port SMA (F) DC Power Receptacle LEMO EGG.0B.304.CLL Finish Black Anodized Weight (per Module) 2.1 lbs. Size (Without Adjustable Feet) 5.00” (L) x 3.75” (W) x 1.90” (H) Outline TO-TE-A Item Eravant Model Number Quantity Proxi-Flange™ Contactless Flange, 1.0” Long STQ-WG-12010-FB-CF 1 Proxi-Flange™ Contactless Flange, 2.5” Long STQ-WG-12025-FB-CF 1 Waveguide Screws, 3/32 Hex Head SWH-332-SS-10 1 (10 Screws Total) Waveguide Screwdriver, 3/32 Hex Head SWH-332-DS 1 SMA Connector Torque Wrench SCH-08008-S1 1 AC-to-DC Power Adapter STU-110006005-HF 1
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Advanced Rev 1.6 -140 -130 -120 -110 -100 -90 -80 -70 60 65 70 75 80 85 90 Dynamic Range (dB) Frequency (GHz) Dynamic Range vs. Frequency -40 -35 -30 -25 -20 -15 -10 60 65 70 75 80 85 90 Port Match (dB) Frequency (GHz) Test Port Match vs. Frequency
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Advanced Rev 1.6 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) NOTE:
- To complete a frequency extension set, pair this Rx module with a compatible Tx/Ref or Tx/ Rx module listed in VNA Frequency Extenders page.
- Eravant reserves the right to change the information presented without notice. CAUTION:
- Exceeding absolute maximum ratings will damage the device. S1, is highly recommended.
- Any foreign objects in the waveguide will cause performance degradation and may damage the device.