STI-05-06-S1 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Advanced Rev 1.0 D-Band Full Waveguide Band Phase Noise Analyzer Down-Converter STI-05-06-S1 is a D-Band phase noise analyzer (PNA) down-converter that converts millimeterwave (mmW) signals from a frequency range of 110 to 170 GHz to the baseband at 10 MHz to 1.6 GHz. The down- converter requires two +3 dBm driving power as its LO input signals at 9.17 to 14.17 GHz from the PNA. The down-converter then convert the DUT mmW signals up to +10 dBm to two IF outputs feeding low frequency PNA, such as Anapico’s APPH equipment, for phase noise analysis. The down-converter has low harmonic levels and excellent gain flatness, extending the microwave PNA to perform the phase noise testing beyond 50 GHz. Various models are available in full waveguide bands, from WR-15 to WR-03 are available to cover the frequency range of 50 to 330 GHz. Electrical Specifications: Mechanical Specifications: Parameter Minimum Typical Maximum RF Input Frequency 110 GHz 170 GHz IF Output Frequency 10 MHz 1 GHz 1.6 GHz LO Input Frequency 9.17 GHz 14.17 GHz LO Power +3 dBm +20 dBm Conversion Gain 5 dB Harmonic Suppression -20 dBc Input P1dB +10 dBm RF Input Power Damage Level +15 dBm Power Supply (AC Adapter Provided) 100 VAC 240 VAC Specification Temperature +25 ˚C Operating Temperature 0 ˚C +50 ˚C Item Specification RF Port WR-06 Waveguide with UG-387/U-M Precision Anti- Cocking Flange LO Ports SMA (F) IF Ports SMA (F) DC Bias Port 2.5 mm DC Jack (AC-to-DC power converter included) DC Bias Switch On-Off Latching Switch with Indicator Light Enclosure Material Black Anodized Aluminum Weight 4.4 Lbs Outline TI-D-A ECCN 3A001.b.7
FEATURES
- Full Band Coverage
APPLICATIONS
- Frequency Extension
- Phase Noise Measurements
- Anapico APPH Phase Noise Analyzers SUPPLEMENTAL DETAILS
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Advanced Rev 1.0 Block Diagram:
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Advanced Rev 1.0 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) NOTE:
- On condition that test data is provided it is collected from a sample lot. Actual data may vary slightly from unit to unit.
- All testing is performed under +25 °C room temperature.
- Eravant reserves the right to change the information presented without notice. CAUTION:
- Exceeding absolute maximum ratings of the device will damage the device.
- If a waveguide is present, any foreign objects in the waveguide will cause performance degradation and may damage or destroy the unit. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended