STD-06SF-NI ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.2 D-Band Waveguide Detector STD-06SF-NI is a D Band waveguide detector that covers the frequency range of 110 to 170 GHz. The detector is zero biased and intended for small signal detection and network analyzer applications. Due to the proprietary circuitry design and careful diode selection, the detector exhibits high sensitivity and extremely flat output characteristics. The detector is designed to have a 10 MHz video bandwidth and a 1 MΩ video output impedance. The minimum detectable signal level is approximately -50 dBm. The Faraday isolator is integrated to improve the input port VSWR. Electrical Specifications: *Note: Positive output voltage polarity is available under model number STD-06SF-PI. Mechanical Specifications: Parameter Minimum Typical Maximum Frequency Range 110 GHz 170 GHz Sensitivity 300 mV/mW Sensitivity Flatness ±2.0 dB RF Input Power -20 dBm +17 dBm VSWR 1.4:1 Video Bandwidth 10 MHz Output Voltage Polarity Negative* Item Specification RF Port WR-06 Waveguide with UG-387/U-M Anti-Cocking Flange DC Port SMA (F) Size 3.50” (L) x 0.94” (Ø) Flange Material Brass Finish Gold Plated and Black Anodized Weight 2.8 Oz Outline TD-D1-A ECCN EAR99
FEATURES
- Full Waveguide Band Operation
- High Sensitivity Without Tuning
- Integrated Faraday Isolator
APPLICATIONS
- Test Lab
- Network Analyzer Systems
- Test instrumentations SUPPLEMENTAL DETAILS
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.2 100 1000 10000 100000 110 115 120 125 130 135 140 145 150 155 160 165 170 Sensitivity (-mV/mW) Frequency (GHz) Typical Performance vs. Frequency Pin = -20 dBm 1.5 4.5 7.5 10.5 13.5 V out (mV) Input Power (dBm) Typical Detected Voltage vs. Input Power
110 GHz
140 GHz
170 GHz
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.2 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) NOTE:
- On condition that test data is provided it is collected from a sample lot. Actual data may vary slightly from unit to unit. All testing is performed under +25 °C room temperature.
- Eravant reserves the right to change the information presented without notice. CAUTION:
- Exceeding absolute maximum ratings will damage the device.
- The device is static sensitive. Always follow ESD rules when working with the device.
- If a waveguide is present, any foreign objects in the waveguide will cause performance degradation and may damage or destroy the unit. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended.