STC-N14-12-S1-C ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2025 by Eravant Rev 1.1 E-Band ACCESS Down-Converter, Compact STC-N14-12-S1-C is an E-Band down-converter that converts millimeterwave signals from a frequency range of 55 to 95 GHz to an output of 10 MHz to 20 GHz. It is compatible with modern Spectrum Analyzers that support external mixers such as Anritsu, Keysight, and Rohde & Schwarz. The down-converter requires 9.17 to 15.83 GHz at +0 dBm input power as its LO, which can be obtained from a standard 20 GHz synthesizer, such as Eravant signal generator model STL-SG- 022203-S1. The down-converter has low harmonic, low spurious levels and excellent gain flatness, making it a good candidate to extend low frequency test equipment for millimeterwave testing purposes. Electrical Specifications: Mechanical Specifications: Parameter Minimum Typical Maximum RF Input Frequency 55 GHz 95 GHz IF Frequency Output 10 MHz 20 GHz LO Input Frequency 9.17 GHz 15.83 GHz LO Power -3 dBm +0 dBm +5 dBm Conversion Loss 14 dB Harmonic Suppression -20 dBc Multiplication Factor 6 RF Input Power Damage Level +15 dBm Power Supply (AC Adapter Provided) 100 VAC 240 VAC Specification Temperature +25 °C Operating Temperature 0 °C +50 °C Item Specification RF Port WR-12 Waveguide with UG-387/U Anti- Cocking Flange LO Port K (F) IF Port SMA (F) Memory Port USB-C (F) DC Bias Port 2.5 mm DC Jack (AC-to-DC power converter included) DC Bias Switch On-Off Latching Switch with Indicator Light Enclosure Material Black Anodized Aluminum Weight 1.5 lbs. Outline TC-WG-A-C ECCN 3A001.b.7
FEATURES
- 55-95 GHz Extended Coverage
- Built-in Memory Cal Data
- Compact Form Factor
- Forced Air Cooling
- Input Voltage: 100 to 240 VAC
APPLICATIONS
- Spectrum Analyzer Frequency Extension
- Frequency Down-conversion
- mmW Receiver
- Antenna Range
- Noise Figure Testing RECOMMENDED PAIRINGS
- Synthesizer STL-SG-022203-S1
- Waveguide Quick Connects
- Cable: SCW-SMSM040-F1-A-PM
- Coax Adapters Waveguide to Coax Adapters RECOMMENDED RESOURCES
- Proxi-Flange: Conference Papers
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2025 by Eravant Rev 1.1 Components Included: Note: Connecting cables are not included. Eravant coaxial cable, model SCW-SMSM040-F1-A, is highly recommended. Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) Item Eravant Model Number Quantity Proxi-Flange™ Contactless Flange, 1.0” Long STQ-WG-12010-FB-CF 1 Waveguide Screws, 3/32 Hex Head SWH-332-SS-10 1 (10 Screws Total) Waveguide Screwdriver, 3/32 Hex Head SWH-332-DS 1 Waveguide Screw, 5/64 Hex Head SWH-564-SS-10 1 (10 Screws Total) Waveguide Screwdriver, 5/64 Hex Head SWH-564-DS 1 USB-C Cable PES-AEUSUS164-1 1 Coax Connector Torque Wrench SCH-08008-S1 1 AC-to-DC Power Adapter PEP-PJ2555-1 1
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2025 by Eravant Rev 1.1 NOTE:
- Performance plots shown above represent a sample lot performance. Actual data may show some unit-to-unit variation.
- Eravant offers calibration services. It is recommended that calibration be performed every 12 months to ensure equipment compliance.
- Connecting cables are not included. The use of Eravant coaxial cables (model SCW-SMSM040-F1-A) is highly recommended.
- Coaxial adapters may be necessary, depending on the connector type of the signal source. Appropriate Eravant adapters are recommended.
- To test a DUT with a coaxial interface, use suitable Eravant waveguide-to-coaxial adapters.
- Operation outside the specified frequency range may result in degraded performance.
- Eravant reserves the right to modify product information without prior notice. CAUTION:
- Any foreign objects in the waveguide may cause performance degradation and damage the unit.
- Exceeding the absolute maximum ratings of the device may cause permanent damage to the extenders. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended.