STC-N10-19-S1 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Advanced Rev 1.2 STC-N10-19-S1 U-Band Full Waveguide Band Down-Converter STC-N10-19-S1 is a U-Band down-converter that converts millimeter wave signals from a frequency range of 40 to 60 GHz to the baseband at 1.6 GHz. The down-converter requires 10 to 15 GHz at +3 dBm input power as its LO. The down-converter has low harmonic levels and excellent gain flatness, making it a good candidate to extend low frequency test equipment for millimeter wave testing purposes.
FEATURES
- Full Band Coverage
APPLICATIONS
- Test Lab
- Instrumentations
- Auto Test Set Parameter Minimum Typical Maximum RF Input Frequency 40 GHz 60 GHz IF Frequency Output 10 MHz 1.6 GHz 18 GHz LO Input Frequency 10 GHz 15 GHz LO Power +3 dBm +20 dBm Conversion Loss 12 dB Harmonic Suppression 20 dB RF Input Power Damage Level +20 dBm Power Supply (AC Adapter Provided) 100 VAC 240 VAC Specification Temperature +25 °C Operating Temperature 0 °C +50 °C SUPPLEMENTAL DETAILS EAR99 Electrical Specifications: Item Specification RF Port WR-19 Waveguide with UG-383/U-M Precision Anti- Cocking Flange LO Port SMA (F) IF Port SMA (F) DC Bias Port 2.5 mm DC Jack (AC-to-DC power converter included) DC Bias Switch On-Off Latching Switch with Indicator Light Enclosure Material Black Anodized Aluminum Weight 2.3 lbs Outline TC-U-A-2 Mechanical Specifications: ECCN www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2022 by Eravant
- On condition that test data is provided it is collected from a sample lot. Actual data may vary slightly from unit to unit. All testing is performed under +25 °C room temperature.
- On condition that simulated test data is provided, actual measured data may slightly vary.
- Eravant reserves the right to change the information presented without notice.
- If a waveguide is present, any foreign objects in the waveguide will cause performance degradation and may damage or destroy the unit.
- Any foreign objects in the antenna will cause performance degradation and possible device damage. Torque wrench model SCH-06004-S1 is highly recommended.
- For 1.35 mm, 1.85 mm, 2.4 mm, 2.92 mm, and SMA connectors proper torque should be recommended. NOTE: CAUTION: Mechanical Outline: Unless otherwise specified, all dimensions are in inches [millimeters]) STC-N10-19-S1 www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2022 by Eravant
-20 -15 -10 40 45 50 55 60 Conversion Loss (dB) Frequency (GHz) Conversion Loss vs. Frequency RF: -20 dBm STC-N10-19-S1 www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2022 by Eravant