STC-20-06-S1 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.5 D-Band Full Waveguide Band Down-Converter STC-20-06-S1 is a D-Band down-converter that converts millimeterwave signals from a frequency range of 110 to 170 GHz to the baseband at 10 MHz to 1.6 GHz. The down-converter requires 9.167 to 14.167 GHz at +3 dBm input power, which can be obtained from a standard 20 GHz synthesizer, such as Eravant model SOT-02220313200-SF-B6. The down-converter has low harmonic levels and excellent gain flatness, making it a good candidate to extend low frequency test equipment for millimeterwave testing purposes. Electrical Specifications: Mechanical Specifications: Parameter Minimum Typical Maximum RF Input Frequency 110 GHz 170 GHz IF Output Frequency 10 MHz 1 GHz 1.6 GHz LO Input Frequency 9.167 GHz 14.167 GHz LO Power +3 dBm +20 dBm Conversion Gain 20 dB Harmonic Suppression 20 dBc Input P1dB -10 dBm RF Input Power Damage Level +13 dBm Power Supply (AC Adapter Provided) 100 VAC 240 VAC Specification Temperature +25°C Operating Temperature 0°C +50°C Item Specification RF Ports WR-06 Waveguide with UG-387/U-M Precision Anti- Cocking Flange LO Port SMA (F) IF Port SMA (F) DC Bias Port 2.5 mm DC Jack (AC-to-DC power converter included) DC Bias Switch On-Off Rocker Latching with Indicator Light Enclosure Material Black Anodized Aluminum Weight 2.3 lbs Outline TC-D-A ECCN 3A001.b.7.d
FEATURES
- Full Band Coverage
APPLICATIONS
- Test Lab
- Instrumentations
- Auto Test Set SUPPLEMENTAL DETAILS
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.5 Block Diagram: 110 115 120 125 130 135 140 145 150 155 160 165 170 Conversion Gain (dB) Frequency (GHz) Typical Conversion Gain vs. RF Frequency IF: 1 GHz; RF: -20 dBm
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.5 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) NOTE:
- On condition that test data is provided it is collected from a sample lot. Actual data may vary slightly from unit to unit. All testing is performed under +25 °C room temperature.
- On condition that simulated test data is provided, actual measured data may slightly vary.
- Eravant reserves the right to change the information presented without notice. CAUTION:
- Exceeding absolute maximum ratings of the device will damage the device.
- If a waveguide is present, any foreign objects in the waveguide will cause performance degradation and may damage or destroy the unit. SCH-06004-S1 is highly recommended. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended