STC-11417400-06-C1 ERAVANT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.2 D-Band Down-Converter, 110 to 170 GHz STC-11417400-06-C1 is a D-Band down-converter that converts millimeterwave signals from the frequency range of 110 to 170 GHz to the baseband at 5 to 65 GHz. The down-converter has a built-in phase locked oscillator (PLO), which is externally referenced at 10 MHz. The down converter also integrates a SPDT switch at the RF input for bypassing in order to monitor the receiving signal level. The switch is controlled by TTL signal and the bypassing “on” is at TTL “Low.” The bypassing loss is 6 dB typical. The RF ports for the downconverter is WR-06 waveguides with UG-387/U-M anti-cocking flange. The IF output is a 1.85 mm female connector and PLO reference signal input connector is an SMA (F) connector. A wall mount AC adapter is included for AC powering. Electrical Specifications: Parameter Minimum Typical Maximum RF Input Frequency 110 GHz 170 GHz IF Frequency Output 5 GHz 65 GHz Conversion Gain 0 dB Combined Harmonic Power -70 dBm -65 dBm Spurious -40 dBc -35 dBc Noise Figure 16 dB Bypass Insertion Loss 6 dB Bypass “ON” TTL “Low” Converter Mode TTL “High” or No Input TTL Low 0 VDC +0.8 VDC TTL High +2.7 VDC +5.0 VDC Switch Isolation 15 dB 20 dB RF Input P1dB -25 dBm RF Input Damage Level +7 dBm Reference Frequency 10 MHz Reference Input Power +3 dBm Reference Damage Level +10 dBm Port Return Loss 10 dB Power Supply (AC Adapter Provided) 100 VAC 240 VAC Specification Temperature +25 °C Operating Temperature +0 °C +50 °C ECCN 3A001.b.4

FEATURES

  • Full Waveguide Band Coverage
  • High IF Frequency Range

APPLICATIONS

  • Test Lab
  • Instrumentations
  • Auto Test Set SUPPLEMENTAL DETAILS

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.2 Mechanical Specifications: Block Diagram: Item Specification RF Input/Output Ports WR-06 Waveguide with UG-387/U-M Anti-Cocking Flange

10 MHz Reference Port SMA (F)

IF Port 1.85 mm (F) Bias Port 2.5 mm DC Jack (AC-to-DC power converter included) Finish Black Anodized Weight 4.4 lbs Outline TC-D-A-2

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.2 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) NOTE:

  • On condition that test data is provided it is collected from a sample lot. Actual data may vary slightly from unit to unit. All testing is performed under +25 °C room temperature.
  • The wall mount AC power adapter is included. The unit can be AC powered in the range of 100 to 240 VAC.
  • Eravant reserves the right to change the information presented without notice. CAUTION:
  • Exceeding absolute maximum ratings of the device will damage the device.
  • If a waveguide is present, any foreign objects in the waveguide will cause performance degradation and may damage or destroy the unit. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended.