SSS-35317-29L-S1 ERAVANT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

SSS-35320-29L-S1 Rev. 1.0 www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com Page | 1 SAGE Millimeter, Inc.

35 GHz Doppler Sensor Head, Single Channel, Long Range, +17 dBm

Copyright © 2017 by SAGE Millimeter, Inc. Description: Model SSS-35317-29L-S1 is Ka Band, lens antenna-based Doppler sensor head that is designed and manufactured for long range measurements of a moving target's speed. The sensor head has a center frequency of 35 GHz and takes a nominal bias of +5.0 VDC/350 mA. The sensor heads are configured with a lens corrected antenna, T/R diplexer, a single channel receiver and a transmitter/receiver oscillator in an integrated package. Sensor heads with a dual receiver are offered under model number SSS-35317-29L-D1 and can detect both the speed and direction of a moving target. Features:  35.00 GHz Operation  Low Flicker Noise and High Sensitivity  Low Harmonic Emission Applications:  Traffic Management Systems  Microwave Fence  Military Surveillance Systems Electrical Specifications: Parameter Minimum Typical Maximum Antenna 3 dB Beamwidth 5° Antenna Side Lobes -20 dB Antenna Gain 29 dBi Antenna Polarization Right-Handed Circular RF Frequency Range 33.9 GHz 35.00 GHz 36.1 GHz Transmitting Power +17 dBm IF Frequency Range DC 100 MHz IF Offset Voltage ±0.1 VDC Frequency Stability -0.3 MHz/°C Power Stability -0.03 dB/°C DC Supply Voltage +5 VDC/350 mA +5.5 VDC Specification Temperature +25˚C Case Temperature -40˚C +85˚C

SSS-35320-29L-S1 Rev. 1.0 www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com Page | 2 SAGE Millimeter, Inc. Copyright © 2017 by SAGE Millimeter, Inc. Mechanical Specifications: Item Specification Gunn Oscillator Bias Port Red Wire Mixer IF Port Solder Pin Mixer IF Ground Solder Pin Material Aluminum Finish Chem Film Weight 12.0 Oz Outline SS-LA-G Mechanical Outline: (Unless otherwise specified, all dimensions are in inches) Note:  SAGE Millimeter, Inc. reserves the right to change the information presented without notice. Caution:  The device is static sensitive. Always follow ESD rules when working with the device.  Wrong bias or reverse bias on the sensor will damage the device.  Exceeding absolute maximum ratings shown will damage the device. Use additional heatsink or fan if necessary.